5www.raytecled.comUK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
6. Mechanical installation
0RXQWXQLWRQDQDSSURSULDWHO\VL]HGSROH
• Secure unit onto pole using supplied grub screws.
(QVXUHSROHLVIXOO\HQJDJHGDQGWLJKWHQJUXEVFUHZVWRWRUTXHQPPPKH[
7. Electrical connection, connect mains supply cable to mains supply at base of column.
8. If the unit is opened for any reason, disconnect mains
9. If carrying out Insulation Resistance tests the normal method of insulation testing
is to connect Live and Neutral together and test between this point and Earth to
prevent the risk of damage to the electronic control gear.
PROTECTION CONCEPTS
Zone 1 and 21 Variant CML23ATEX3246X & IEC Ex CML23.0094X or CML23UKEX3247X
II 2 GD Ex eb mb IIC T4 Gb
Ex tb IIIC T135OC Db
-40°C to +50°C
IP66
110V-254V AC
Zone 2 and 22 Variant CML23ATEX4285X & IEC Ex CML23.0094X or CML23UKEX4286X
II 3 GD Ex ec mc IIC T4 Gc
Ex tb IIIC T135OC Db
-40°C to +50°C
IP66
110V-254V AC
3. Maintenance
1. It is essential that all SPARTAN units are maintained in accordance with the
UHTXLUHPHQWV RI WKH (1 VWDQGDUG (OHFWULFDO DSSDUDWXV IRU H[SORVLYH JDV
DWPRVSKHUHV²RWKHUWKDQPLQHV
2. IMPORTANT1R PRGLÀFDWLRQV DUH SHUPLWWHG WR WKH XQLW DOO VSDUH SDUWV PXVW EH
SXUFKDVHG IURP WKH PDQXIDFWXUHU XQDXWKRUL]HG PRGLÀFDWLRQV RU VSDUH SDUWV ZLOO
LQYDOLGDWHFHUWLÀFDWLRQDQGPDNHWKHHTXLSPHQWGDQJHURXV
3. Isolate the SPARTAN unit from the mains supply and allow to cool before carrying out
any maintenance work.
4. The unit has one power supply; in the event that a power supply needs to be replaced
open the terminal enclosure cover to get access to the power supply. Remove the
power supply from the mains terminals then remove LED wires (white and white with
red mark.)
5. Disposal of packaging, SPARTAN units and old LED assemblies/power supplies
should be carried out in accordance with national regulations.
