Fuho Color Camera User manual

i
Intelligent Wide Dynamic High
Definition Color Camera
USER MANUAL
2011 NOV. V1.0
Optional

ii
Index
A. Product Features ........................................................................................... 1
B. Specifications................................................................................................. 2
C. Dimensions..................................................................................................... 3
D. Real panel:...................................................................................................... 3
E. OSD Functions............................................................................................... 4
F. OSD operation................................................................................................ 5
Main menu .......................................................................................................... 5
(1) AE Mode setting......................................................................................... 5
(2) Color Adjust................................................................................................ 8
(3) Image adjust ............................................................................................... 9
(4) Intelligent .................................................................................................. 11
(5) System setting.......................................................................................... 13

1
A. Product Features
1. High Sensitivity 1/3” CCD WDR Color Camera
2. High Resolution Color up to 600TVL
3. 2D/3D Noise Reduction (HDNR)
4. Super Real WDR Range/Digital WDR Function
5. Digital Slow Shutter from x2 up to x256 (Max)
6. Back Light Compensation(BLC) / High light Control(HLC)
7. E-PTZ (Zoom x 2) / Digital Zoom x 256
8. Editable Privacy Mask x 8 (Color)
9. Light Detection On Human Face With Dynamic Light Compensation
10. Human Face Detection With Auto Zoom In Feature
11. Process The Images With High Quality Demisted Surveillance system
12. Night Intelligence IR Detection/ Auto Adjustment On Exposure
13. Multi-Language OSD Control
14. Motion detection
15. Color Rolling Suppression

2
B. Specifications
Video System NTSC PAL
Pick Up Element 1/3” 760H CCD Image Sensor
Image Signal Process Digital Signal Processor
Number of Pixels 768 (H) × 494 (V) 752 (H) × 582 (V)
Picture Elements Approx. 380K Approx. 440K
Horizontal Resolution Color: 600 TVL
Power Supply DC +12V
Power Consumption 180 mA
Synchronization Internal Synchronization
Scanning System 2 : 1 Interlace
Minimum Illumination 0.01 Lux
S/N Ration Max. 52 dB ( AGC Off, )
OSD Menu Build-in Multi-layers semi-opacity Menu Setting
Camera Title/ Function
Enable Display Camera Title/ Function Enable Display
Wide Dynamic Range WDR real wide dynamic rang compression
Digital Slow Shutter X2 ~ X256
( BLC ) Backlight
Compensation Function HLC / BLC / off
( AGC ) Automatic Gain
Control on / off
( DNR ) Digital Noise
Reduction 2D/3D-NR
Digital Demist Process On / Off
Digital Zoom Zoom 256X
(D & N) Digital Day & Night
Mode on (Black & White)/Auto/External input/off (color)
Face Tracking Auto Zoom on / off
Face Detection on / off
Face Metering
Compensation on / off
Motion Detecting Function on / off
Flash Suppression Function on / off
Privacy Masking Function on/off (8 Editable area)
Automatic Iris Control DC Lens drive
Blemish Compensation Static & Dynamic (4096 points)

3
Image Quality Adjustment Brightness / Contract / Saturation / Sharpness / Hue
Auto White Balance AWB/ATW
Language English / Simplified Chinese / (support multi-language)
Electronic Shutter Speed
Auto:1/60(50)S TO 1/100,000 S
Manual: 1/60(50)S, FL1/120(100)S, 1/250S, 1/500S, 1/1,000S,
1/2,000S, 1/4,000S, 1/10,000S
Video Signal Output 1 Vp-p standard video signal output, 75 Ohms
Operation Temperature - 5°C ~ +40°C
Dimensions L : 124mm W : 66mm H : 54mm
Weight Approximately 295 g
C. Dimensions
Unit: mm
D. Real panel:
Auto Iris Lens
Connector
Power Indicator
Power Input
DC12V/AC24V
OSD operation
Set up / Up / Right
/ Left / Down
Video Out

4
E. OSD Functions
MENU Function Remark
AE mode
1.Standard AE
Please refer to
OSD operation F-1
AE mode setting
2. SWDR
3.BLC (back light compensation )
4.HLC (high light compensation)
5.Face AE
6.Face auto zoom
7.Demist
Color adjust
1.AWB (Auto white balance )
Please refer to
OSD operation F-2
Color adjust
2.Brightness
3.Color-Red
4.Color-Green
5.Color-Blue
6.Contrast
7.Saturation
8.CR suppress
Image Adjust
1.Day & Night
Please refer to
OSD operation F-3
Image adjust
2.Digital slow shutter
3.3D-NR 3D
4.2D-NR-1 2D
5.2D-NR-2 2D
6.Sharpen
7.FC suppress
8.Blemish compensation
Intelligence
1.Face detection Please refer to
OSD operation F-4
Intelligence setting
2.Motion detection
3.Digital-Zoom
4.Privacy mask
System setting
1.Lens
Please refer to
OSD operation F-5
System setting
2.IR input level IR
3.Smart IR control Smart IR
4.Camera ID
5.Baud rate
6.AC Freq
7.Language
8. ID/Icon Display
Information Display the local information

5
F. OSD operation
Main menu
Setup: 1.Click one time to enter the Main menu
Click twice ( to Exit OSD menu, Reload Fty ,
Return to Previous page, Exit &Save)
UP / Down: Selection.
Left / Right: Enter & Return.
(1) AE Mode setting
Standard AE
Under Standard mode AE, symbol will be shown on the upper left
corner of Live view.
SWDR
Level: (Setting value: 0-8), smaller value will make outside image
brighter, the higher value will make image brighter.
DWDR: (On/Off) enable the digital WDR with the double scan WDR
will make images brighter.
Saturation Enhance.
Saturation set up.
Star Light WDR
WDR enhance.
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.

6
Symbol will be shown on the upper left corner of Live view.
Standard SWDR
BLC: Back light compensation
Level: （Auto, low, Middle, high）
Symbol will be shown on the upper left corner of Live view.
Normal Back light compensation
HLC: High light compensation
Set Range: Click Right button to enter the menu, press SETUP
button in order to set up next corner point. (in this area, any brighter
light source will be blocked)
Normal HLC on
Detection are (area marked in Red)
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.


7
Level : Low, Middle, High.
Mask Grayscale: (Value: 1-6) Mask color set up, the color is closer to
white when the value is higher.
Symbol will be shown on the upper left corner of Live view.
Face AE
Frame: (ON/OFF) Box up the human faces when human faces are
detected .
Sensitivity : (Value: 0~11) human face detection sensitivity:
The higher number, the more sensitive
Symbol will be shown on the upper left corner of Live view
Face auto zoom
Frame: (ON/OFF) Box up the human faces when human faces are
detected .
Sensitivity : (Value: 0~11) human face detection sensitivity:
The higher number, the more sensitive.
Warning Trigger: Level: (High/Low/Off) Alarm output when human
face is detected. Default output port: PIO2.
Warning Seconds: (Value: 0-65536 /sec) timer of alarm output, when
human face is detected.
Symbol will be shown on the upper left corner of Live view
Normal
Face auto zoom in

8
Demist
Level: (Auto/Low/Middle/High)
Symbol will be shown on the upper left corner of Live view
Normal Demist activated
(Heavy Fog)
(Middle Fog)
(Light Fog)
(2) Color Adjust
1. WB: AWB /ATW / F/A / U30 / CWF / D50 / D65 / D75.
2. Brightness:（0~99）.
3. Color-Red: Red (0~99).
4. Color-Green: Green (0~99).
5. Color-Blue: Blue (0~99).
6. Contrast: (0~99).
7. Saturation: (0~99).
8. CR suppress: ON/OFF
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.

9
(3) Image adjust
1. Day & Night
Mode: Auto-General
When the condition light value matches the setting value, it will switch
to mode BLACK and WHITE automatically.
(1) Color Burst
ON/OFF only be activated under mode BW and mode
Auto-General.
(2) Delay Control
(0~255)
Day and Night switch timer set up. Only be activated under
mode Auto-General.
(3) Day to Night: (Value: 0-255). “Only” be activated under mode
Auto-General.
The value of Day to Night switches point setting (Color to BW
switch). The Day to Night switch point “MUST” be latter than
Night to Day recovery point.
(4) Night to Day: (Value: 0-255). “Only” be activated under mode
Auto-General.
The value of Night to Day switch point set up (BW to Color). The
Night to Day recovery point “MUST” be latter than the Day to
Night switch point.
(5) IR CUT output
LEVEL: (High/Low/Off) only be activated under mode
Auto-General. A high/low signal generated by GPIO3 in order
to provide a standard point for IR-CUT switching.
Mode: External input
External control, input port: PIO0, Caution: Please go to the menu
System SettingIR Voltage Level input setting set up the value of
input voltage level.
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.

10
Mode: Color
Color mode only
Mode: BW
BW mode only
Mode: Auto-Progressive
2. Slow shutter
1/100000, 1/10000, 1/5000, 1/2000, 1/500, 1/240, 1/120, 1/60, AUTO, 2x,
3x, 4x, 5x, 8x, 16x, 32x, 64x, 128x, 256x
To extend the photoperiod in order to enhance the sensitization. It will
help to have brighter images in a condition with lack of light.
Slow shutter OFF Sow shutter ON
3. 3D DNR (0~3)
To reduce image Noise
DNR OFF: Noisy 3D-DNR On/Auto Clearly
4. 2D DNR1: (0~32)
5. 2D DNR2: (0~32)
6. Sharpen: (0~32)
The higher value, the stronger effects.
7. FC suppress: (0~15).
The higher value, the stronger effects.
8. Blemish compensation

11
(4) Intelligent
1. Face detection
Human face detection: ON/OFF
Frame: (ON/OFF)
Box up the human faces when human faces are detected .
Sensitivity : (Value: 0~11) human face detection sensitivity:
The higher number, the more sensitive.
Warning Trigger: level: (High/Low/Off)
Alarm output when human faces are detected. Default output port:
PIO2.
Warning Seconds: (Value: 0-65536 /sec) timer of alarm output, when
human face is detected.
2. Motion
ON/OFF: Motion detection
Set Area:
Motion detection area set up( Click Right button to set up / click
to remove the area and Exit).
Sensitivity : (-2~2)
The higher number, the more sensitive.
Warning Trigger:
Level: (High/Low/Off)
An alarm outputs when a motion is detected. Default output port:
PIO2.
Warning Seconds:
(Value: 0-65536 /sec)
Timer of alarm output, when a motion is detected.
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.


12
Live view Motion detection area set up(Red
zoom)
3. Digital-Zoom
Zoom in range: 1~255x.
Vertical: (-100~100)
Image vertical position set up after zoom in
Horizon: (-100~100)
Image horizontal position set up after zoom in
4. Privacy mask
Opacity: (0~3)
Mask transparency setting.
Mask select : (1~8)
Select and set up the mask, maximum 8.
Set mask range : Mask range set up (click Right button to set up)
Switch: ON/OFF.
Mask color: (0~65535)
Masks color setting

13
(5) System setting
1. Lens
Mode:
To select lens type
DC in door/ DC outdoor/ Manual
Brightness: only be activated with DC IRIS (-50~50).
2. Smart IR: ON/OFF
3. Camera ID: Pepco ID (0~255).
4. Baud rate: (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,
230400, 460800).
5. AC Freq: Frequency setting (50HZ / 60HZ).
6. Language: language switch(English / Simply Chinese / Español /
Française).
7. ID/Icon display: Pelco ID display and Icon display
PresstointoOSD.
Presstointosub‐menu.
Press/：Selection.
Press ：Return.