FujiFilm X-T3 User manual

New Features Guide
Version 5.00
Features added or changed as a result of rmware updates may no
longer match the descriptions in the documentation supplied with
this product. Visit our website for information on the updates avail-
able for dierent products:
https://fujifilm-x.com/support/download/firmware/
BL00005268-200 EN

Contents
X-T3 rmware version 5.00 adds or updates the features listed be-
low. For information on earlier versions, visit the following website.
http://fujifilm-dsc.com/en/manual/
No. Description X-T3
P
See
PVer.
1
1The chosen value is now displayed when a color tem-
perature is selected for white balance. 10, 12 1, 22.00
2
2
The camera now displays a “charging” icon when pow-
ered via USB or by the AC-9VS AC adapter supplied with
the VG-XT3 vertical battery grip.
10, 12 1,
22.00
3
3
Touch zoom is now available with compatible lenses. A
TOUCH ZOOM option has consequently been added
to DBUTTON/DIAL SETTING> TOUCH SCREEN
SETTING in the setup menu.
24, 211 3,
23 4.40
4
4
In focus mode C(AF-C), users can now refocus during
movie recording by pressing the shutter button halfway
or by pressing the button to which AF-ON is assigned.
54 4 4.00
5
5Focus-point selection is now available while AE lock is in
effect. 82 5 4.00
6
6
Changes have been made to the GAF/MF SETTING>
FACE/EYE DETECTION SETTING item in the shoot-
ing menu.
121 6 3.00
7
7
Improved the performance of GAF/MF SETTING >
FACE/EYE DETECTION SETTING in the shooting
menu.
121 6,
20 4.00
8
8
The default for GAF/MF SETTING> RELEASE/
FOCUS PRIORITY> AF-S PRIORITY SELECTION
in the shooting menu has changed from RELEASE to
FOCUS.
125 8 4.00
9
9An AF RANGE LIMITER option has been added to the
GAF/MF SETTING item in the shooting menu. 125 8 4.00
10
10
Changes have been made to the ASHOOTING
SETTING> FLICKER REDUCTION item in the shoot-
ing menu.
136 9 3.00
11
11
The BMOVIE SETTING> F-Log RECORDING item
in the shooting menu has been renamed F-Log/HLG
RECORDING.
149 10 2.00

No. Description X-T3
P
See
PVer.
12
12
The procedure for rating pictures has changed. As a re-
sult, the content of the playback information displays
has changed and a RATING item has been added to the
playback menu.
160,
161,
175
11,
12,
13
4.00
13
13 Movies over 4GB in size are now recorded to a single file.
176,
261,
295
14 2.10
14
14
An bAREA SETTING option has been added under
D USER SETTING in the setup menu, resulting in a
change to the basic setup procedure and adjustments
to TIME DIFFERENCE. In addition, DATE/TIME now
offers a 24-hour clock.
187 15 5.00
15
15 The items listed in the setup menu under
D USER
SETTING> RESET have changed. 189 16 5.00
16
16
The D CONNECTION SETTING> Bluetooth
SETTINGS item in the setup menu has been renamed
Bluetooth/SMARTPHONE SETTING and now
offers an IMAGE TRANSFER WHILE POWER OFF
option. In addition, AUTO IMAGE TRANSFER and
SMARTPHONE SYNC. SETTING have respectively
been renamed AUTO IMAGE TRANSFER ORDER and
SMARTPHONE LOCATION SYNC.
216 24 5.00
17
17
Upload timing has changed. Pictures can now be upload-
ed not only during playback or when the camera is off
but also while shooting is in progress.
216 24 5.00
18
18
D CONNECTION SETTING> GENERAL SETTINGS
has been reorganized as follows:
•
LOCATION INFO has been moved to D SCREEN
SET-UP,
• rBUTTON SETTING has been moved to
D BUTTON/DIAL SETTING and renamed
aFn1 BUTTON SETTING,
• GEOTAGGING has been moved to D
SAVE
DATA SET-UP, and
• NAME and RESIZE IMAGE FOR
SMARTPHONE Hhave been moved to
Bluetooth/SMARTPHONE SETTING.
201,
210,
215,
216
16,
17,
24
5.00

No. Description X-T3
P
See
PVer.
19
19 The procedure for connecting wirelessly to smartphones
has changed. 254 31 5.00
20
20 The roles that can be assigned to the function buttons
have changed.
204,
228 18 3.00
21
21
Digital zoom lenses equipped with lens function but-
tons are now supported. A POWER ZOOM LENS
FUNCTION (Fn) SETTING option has consequently
been added to DBUTTON/DIAL SETTING in the set-
up menu. In addition, the roles that can be assigned to
the function buttons have changed.
204,
205,
228,
229,
249
18,
20,
28,
30
4.40
22
22
A LENS ZOOM/FOCUS SETTING item has been add-
ed to DBUTTON/DIAL SETTING in the setup menu
to control the behavior of digital zoom lenses equipped
with lens function buttons.
209 21 4.40
23
23
FOCUS RING has consequently been renamed FOCUS
RING ROTATE and has, together with FOCUS RING
OPERATION, been moved to LENS ZOOM/FOCUS
SETTING.
209 21 4.40
24
24
Changes have been made to the DBUTTON/DIAL
SETTING> TOUCH SCREEN SETTING item in the
setup menu.
211 23 3.00
25
25
A Bluetooth DEVICE LIST item has been added to
D CONNECTION SETTING> Bluetooth SETTINGS
in the setup menu.
216 24 4.50
26
26
The DCONNECTION SETTING> PC CONNECTION
MODE item in the setup menu has been renamed
CONNECTION MODE.
218 26 3.10
27
27 The TG-BT1 tripod grip has been added to the optional
accessory list. 266 35 4.50

1
Changes and Additions
Changes and additions are as follows.
X-T3 Owner’s Manual: P10 Ver. 2.00
The Electronic Viewnder
ALL-Intra
JWhen a color temperature is selected for white balance (X‐T3
Owner’s Manual P108), the chosen value now appears in
the display.
0The camera now displays a“charging”icon when powered via
USB or by the AC‐9VS AC adapter supplied with the VG‐XT3
vertical battery grip.

2
X-T3 Owner’s Manual: P12 Ver. 2.00
The LCD Monitor
12800
ᵎᵏᵍᵎᵏᵍᵐᵎᵏᵖᴾᵏᵎᵘᵎᵎᴾᵟᵫ
TWhen a color temperature is selected for white balance (X‐T3
Owner’s Manual P108), the chosen value now appears in
the display.
zThe camera now displays a“charging”icon when powered via
USB or by the AC‐9VS AC adapter supplied with the VG‐XT3
vertical battery grip.

3
X-T3 Owner’s Manual: P24 Ver. 4.40
Shooting Touch Controls
Touch Zoom
If the lens supports touch zoom, you can
zoom in and out by touching the display.
Tap the touch zoom button in the display
to enable touch zoom.
Touch zoom is controlled using the but-
tons in the display.
Button
Button
Description
Description
Touch zoom
Touch zoom Enable touch zoom.
Zoom in
Zoom in Zoom in or out. Touch and hold to zoom in or out at a constant
speed.
Zoom out
Zoom out
Rocker switch
Rocker switch Swipe to choose a zoom position. Touch and hold to zoom in
or out at a speed corresponding where you put your finger.
Disable
Disable Disable touch zoom.

4
X-T3 Owner’s Manual: P54 Ver. 4.00
Adjusting Movie Settings
N
• The indicator lamp lights while recording is in progress (the BMOVIE
SETTING> TALLY LIGHT option can be used to choose the lamp—
indicator or AF-assist—that lights during movie recording and
whether the lamp blinks or remains steady). During recording, you
can change exposure compensation by up to ±2EV and adjust zoom
using the zoom ring on the lens (if available).
• If the lens is equipped with an aperture mode switch, select the ap-
erture mode before beginning recording. If an option other than Ais
selected, shutter speed and aperture can be adjusted while recording
is in progress.
• While recording is in progress, you can:
-Adjust sensitivity
-Use the VIEW MODE button and the eye sensor to switch between
the EVF and LCD monitor displays
-Refocus using any of the following methods:
•Press the shutter button halfway
•Press a function button to which AF-ON is assigned
•Use touch screen controls
-Display a histogram or articial horizon by pressing the button to
which HISTOGRAM or ELECTRONIC LEVEL has been assigned
• Recording may be unavailable at some settings, while in other cases
settings may not apply during recording.
• The slot to which movies are recorded can be selected using the
DSAVE DATA SET-UP> SELECT SLOT(FSEQUENTIAL) option in
the D(setup) menu.
• To choose the focus area for movie recording, select BMOVIE
SETTING> FFOCUS AREA and use the focus stick (focus lever) and
rear command dial.
• In focus mode C(AF-C), the camera can be refocused during movie
recording by pressing the shutter button halfway or by pressing the
button to which AF-ON is assigned.

5
X-T3 Owner’s Manual: P82 Ver. 4.00
Focus/Exposure Lock
Compose photographs with o-center subjects.
1 Position the subject in the focus
frame and press the shutter button
halfway to lock focus and exposure.
Focus and exposure will remain
locked while the shutter button is
pressed halfway (AF/AE lock).
2 Keep the shutter button pressed half-
way.
3 Press the button all the way down.
N
• Focus lock using the shutter button is only available when ON is se-
lected for DBUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE.
• The focus lever (focus stick) can be used to reposition the focus point
during exposure lock.

6
X-T3 Owner’s Manual: P121 Ver. 4.00
FACE/EYE DETECTION SETTING
Intelligent Face Detection sets focus and
exposure for human faces anywhere in
the frame, preventing the camera from
focusing on the background in group
portraits. Choose for shots that em-
phasize portrait subjects. You can also
choose whether the camera detects and focuses on either the
left or right eye when Intelligent Face Detection is on.
Option
Option
Description
Description
FACE DETECTION
ON
Adjust settings for Intelligent Face Detection. You can also adjust
eye detection settings.
• gEYE OFF: Intelligent Face Detection only.
• uEYE AUTO: The camera automatically chooses which eye
to focus on when a face is detected.
• wRIGHT EYE PRIORITY: The camera focuses on the right
eye of subjects detected using Intelligent Face Detection.
• vLEFT EYE PRIORITY: The camera focuses on the left eye
of subjects detected using Intelligent Face Detection.
OFF Intelligent Face Detection and eye priority off.
O
• If the subject moves as the shutter button is pressed, the face may
not be in the area indicated by the green border when the picture
is taken.
• In some modes, the camera may set exposure for the frame as a
whole rather than the portrait subject.

7
N
• The face selected by the camera is indicated by a green border. Any
other faces detected by the camera are indicated by gray borders.
To have the camera focus on a dierent subject, tap inside the gray
border. The gicon will change from white to green.
• You can also switch subjects by pressing the function button to which
FACE SELECT op is assigned and then using the focus stick (focus
lever) or (during viewnder photography) touch controls (P20).
• To switch from face detection to manual focus-area selection, press
the center of the focus stick (focus lever). Press again to re-enable
face detection.
• If the selected subject leaves the frame, the camera will wait a set
time for its return and consequently the green frame may sometimes
appear in locations where no face is seen.
• You cannot switch subjects during burst photography.
• Depending on shooting conditions, face selection may be suspend-
ed at the close of burst shooting.
• Faces can be detected with the camera in vertical or horizontal ori-
entation.
• If the camera is unable to detect the subject’s eyes because they are
hidden by hair, glasses, or other objects, the camera will instead focus
on faces.
• Face/eye detection options can also be accessed via shortcuts.

8
X-T3 Owner’s Manual: P125 Ver. 4.00
RELEASE/FOCUS PRIORITY
Choose how the camera focuses in focus mode AF-S or AF-C.
Option
Option
Description
Description
RELEASE Shutter response is prioritized over focus. Pictures can be taken
when the camera is not in focus.
FOCUS Focus is prioritized over shutter response. Pictures can be only
taken when the camera is in focus.
N
From rmware version 4.00, the default for AF-S PRIORITY SELECTION
has changed to FOCUS.
X-T3 Owner’s Manual: P125 Ver. 4.00
AF RANGE LIMITER
Limit the range of available focus distances for increased focus
speed.
Option
Option
Description
Description
OFF Focus limiter disabled.
CUSTOM
Limit focus to a range of distances defined by a minimum and
maximum.
• OK: Limit focus to the selected range.
• SET: Choose two objects and limit focus to the distance be-
tween them.
PRESET1 Limit focus to a preset range.
PRESET2
O
• Choosing a focus range that includes distances shorter than the min-
imum focus distance of the lens disables the focus limiter.
• The values listed and displayed for the focus limiter may dier from
the actual focus distance.
N
The following additional operations can be performed when CUSTOM
is selected:
• You can tap objects in the touch screen display to choose the focus
range.
• Instead of tapping an object in the display, you set the maximum
focus distance to innity by rotating the focus ring.

9
X-T3 Owner’s Manual: P136 Ver. 3.00
FLICKER REDUCTION
Reduce icker in pictures and the display when shooting under
uorescent lighting and other similar light sources.
Option
Option
Description
Description
ALL FRAMES Flicker reduction is applied to all frames continuous
shooting frame rate reduces.
FIRST FRAME
Flicker measurement is taken prior to the first frame only
and the same reduction amount is applied to all subse-
quent frames that flicker may occur.
OFF Flicker reduction disabled.
O
• Flicker reduction increases the time needed to record pictures.
• OFF is selected for FLICKER REDUCTION when the electronic shut-
ter is used.
• Flicker reduction is not available during movie recording.

10
X-T3 Owner’s Manual: P149 Ver. 2.00
F-Log/HLG RECORDING
Choose the destination for F‐Log and HLG (Hybrid Log-Gamma)
movies shot while the camera is connected to an HDMI device.
Option
Option
Description
Description
bPYPThe footage is processed using film simulation and both
saved to the memory card and output to the HDMI device.
bF-Log YF-Log The footage is recorded to the memory card and output to
the HDMI device in F-Log format.
bPYF-Log The footage is output to the HDMI device in F-Log format
but saved to the memory card with film simulation applied.
bF-Log YPThe footage is recorded to the memory card in F-Log format
but output to the HDMI device with film simulation applied.
bHLG YHLG The footage is recorded to the memory card and output to
the HDMI device in HLG format.
N
• F-Log oers a gentle gamma curve with a wide gamut suitable for
further processing post-production. Sensitivity is restricted to values
between ISO 640 and ISO 12800.
• The HLG (Hybrid Log-Gamma) recording format conforms to the inter-
national ITU-R BT2100 standard. When viewed on HLG-compatible dis-
plays, high-quality HLG footage faithfully captures high-contrast scenes
and vivid colors. Sensitivity is restricted to values between ISO1000 and
ISO12800. HLG recording is available when H.265 (HEVC) is selected
for BMOVIE SETTING> H.265 (HEVC)/H.264 in the shooting menu.
• Film simulation (P) footage is recorded using the option selected for
BMOVIE SETTING> FFILM SIMULATION in the shooting menu.
• Footage shot with bPYF-Log or bF-Log YPcannot be recorded
to the memory card and output to the HDMI at dierent frame sizes
(4K, Full HD). In addition, the following BMOVIE SETTING options
are unavailable:
-MOVIE MODE frame rate options of 59.94P and 50P
-FULL HD HIGH SPEED REC
-VINTERFRAME NR
-HDMI OUTPUT INFO DISPLAY

11
X-T3 Owner’s Manual: P160 Ver. 4.00
The Playback Display
This section lists the indicators that may be displayed during
playback.
OFor illustrative purposes, displays are shown with all indicators lit.
A
Date and time
B
Face detection indicator
C
Bluetooth ON/OFF
D
Image transfer order
E
Image transfer status
F
Number of frames selected for upload
G
Card slot
H
Frame number
I
Protected image
J
Location data
K
Battery level
L
Image size/quality
M
Film simulation
N
Dynamic range
O
White balance
P
Sensitivity
Q
Exposure compensation
R
Aperture
S
Shutter speed
T
Playback mode indicator
U
Movie icon
V
Time code
W
Red-eye removal indicator
X
Advanced filter
Y
Gift image
Z
Photobook assist indicator
a
DPOF print indicator
b
Rating................................................................. 13

12
X-T3 Owner’s Manual: P161 Ver. 4.00
The DISP/BACK Button
The DISP/BACK button controls the display
of indicators during playback.
Standard Information o
01/01/2018 10:00 AM
5.6 128001/1000 +1.0
Info display
Favorites: Rating Pictures
Pictures can be rated via the RATING item in the playback menu.

13
X-T3 Owner’s Manual: P175 Ver. 4.00
RATING
Rate pictures using stars.
1 Select RATING in the playback menu.
2 Rotate the front command dial to choose a picture and the
rear command dial to choose a rating of from 0 to 5 stars
(“I”).
N
• The selector can be used in place of the front command dial to
choose a picture.
• The rating dialog can also be displayed by pressing the AE-L button in
single-frame, nine-frame, or hundred-frame playback.
• Use touch controls to zoom in or out.

14
X-T3 Owner’s Manual: P176 Ver. 2.10
COPY
O
• Copying ends when the destination is full.
• If you attempt to copy a le over 4GB in size to a memory card with
a capacity of 32GB or less, copying will end and the le will not be
copied.
X-T3 Owner’s Manual: P261 Ver. 2.10
Mac OS X/macOS
Pictures can be copied to your computer using Image Capture
(supplied with your computer) or other software.
O
Use a card reader to copy les over 4GB in size.
X-T3 Owner’s Manual: P295 Ver. 2.10
Memory Card Capacity
O
If the memory card has a capacity of over 32GB, movies will be record-
ed in single les, regardless of size. If the card has a capacity of 32GB
or less, movies over 4GB in size will be recorded uninterrupted across
multiple les.

15
X-T3 Owner’s Manual: P187 Ver. 5.00
b AREA SETTING
Adjust settings for your current time zone.
AREA SETTING
Choose your time zone from a map.
DAYLIGHT SAVINGS
Turn daylight saving time on or o.
Option
Option
Description
Description
ON Daylight saving time on.
OFF Daylight saving time off.
X-T3 Owner’s Manual: P187 Ver. 5.00
TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to
the local time at your destination when traveling. To specify the
dierence between your local and home time zone:
O
Use bAREA SETTING to choose your home time zone before select-
ing a local time zone using gLOCAL.
1 Highlight gLOCAL and press MENU/OK.
2 Use the selector to choose the local time zone. Press MENU/OK
when settings are complete.
N
Select ON to enable daylight saving time.
To set the camera clock to local time, highlight gLOCAL and
press MENU/OK. To set the clock to the time in your home time
zone, select hHOME.
Options
Options
gLOCAL hHOME
N
If gLOCAL is selected, gwill be displayed in yellow for about three
seconds when the camera is turned on.

16
X-T3 Owner’s Manual: P189 Ver. 5.00
RESET
Reset shooting or setup menu options to default values.
1 Highlight the desired option and press MENU/OK.
Option
Option
Description
Description
SHOOTING MENU
RESET
Reset all shooting menu settings other than custom
white balance and custom settings banks created using
EDIT/SAVE CUSTOM SETTING to default values.
SET-UP RESET
Reset all setup menu settings other than DATE/TIME,
bAREA SETTING, TIME DIFFERENCE, and
COPYRIGHT INFO to default values.
INITIALIZE Reset all settings other than custom white balance to
default values.
2 A conrmation dialog will be displayed; highlight OK and
press MENU/OK.
X-T3 Owner’s Manual: P201 Ver. 5.00
LOCATION INFO
Select ON to display location info downloaded from a smart-
phone.
Options
Options
ON OFF