FujiFilm X100V Owner's manual

New Features Guide
Version 2.00
Features added or changed as a result of rmware updates may no
longer match the descriptions in the documentation supplied with
this product. Visit our website for information on the updates avail-
able for dierent products:
https://fujifilm-x.com/support/download/firmware/
BL00005124-200 EN

Contents
X100V rmware version 2.00 adds or updates the features
listed below. For information on earlier versions, visit the
following website.
http://fujifilm-dsc.com/en/manual/
No. Description X100V
P
See
PVer.
1
ND FILTER is now available during movie record-
ing. This has resulted in a change in the position of
the ND filter icon in the EVF/LCD shooting display.
16, 150 1,
2
2.00
2
The digital teleconverter can now also be used
when RAW is selected for HIMAGE QUALITY
SETTING > IMAGE QUALITY in the shooting
menu. A DIGITAL TELE-CONV. option has con-
sequently been added to RAW CONVERSION in
the playback menu.
80, 181 3,
4
3
A BRIGHT FRAME POSITION MEMORY item
has been added to DSCREEN SET-UP in the
setup menu.
207 5
4Function buttons can now be assigned SPOT
METERING LOCK.222, 253 6
5
Changes have been made to the VIEWFINDER
SELECTOR option for DBUTTON/DIAL
SETTING > LOCK > FUNCTION SELECTION
in the setup menu.
230 8
6
The camera can now be used as a web-
cam. The DCONNECTION SETTING >
PC CONNECTION MODE item in the set-
up menu has consequently been renamed
CONNECTION MODE and an X WEBCAM op-
tion has been added.
239 9

1
Changes and Additions
Changes and additions are as follows.
X100V Owner’s Manual: P16 Ver. 2.00
The EVF/LCD Monitor
CThe position of the ND lter icon has changed.
5
4
3
2
1
0
-1
-2
-3
-4
-5
5
4
3
2
1
0
-1
-2
-3
-4
-5
12800
1000
JI LK MN
Q
R
T
U
a
O
P
V
S
W
Y
X
Z
c bdefh gkl ijmnop
q
t
s
r
v
w
0
u
1
DA E GF H
BC
y
z
x

2
X100V Owner’s Manual: P150 Ver. 2.00
ND FILTER
Selecting ON enables the camera’s built-in Neutral Density (ND)
lter, reducing exposure by the equivalent of 4 EV. This allows
slower shutter speeds or wider apertures to be used with bright-
ly lit subjects, making it possible to blur motion or soften back-
ground details without risk of overexposure.
Options
ON OFF
N
The ND lter can now be used during movie recording.

3
X100V Owner’s Manual: P80 Ver. 2.00
The Digital Teleconverter
Use the digital teleconverter to further magnify the image while
processing it for sharp, high-resolution results.
1 Assign DIGITAL TELE-CONV. to the control ring.
2 Choose the zoom angle using the
control ring.
Standard (35 mm*)50 mm*70 mm*
* 35 mm format equivalent
3 Take pictures at the selected zoom angle.
O
• Image quality drops slightly at DIGITAL TELE-CONV. settings of 50 and
70 mm.
•The digital teleconverter can now be used for RAW pictures.
•
The digital teleconverter may be unavailable in some modes.
N
•
Digital teleconverter settings can also be accessed via ASHOOTING
SETTING> DIGITAL TELE-CONV..
•
The zoom angles available when a conversion lens is attached are 72
and 100 mm for telephoto conversion lenses (teleconverters) and 41
and 58 mm for wide-angle conversion lenses.

4
X100V Owner’s Manual: P181 Ver. 2.00
RAW CONVERSION
The settings that can be adjusted when converting pictures from
RAW to another format are:
Setting Description
REFLECT SHOOTING COND. Create a copy using the settings in effect at the time
the photo was taken.
IMAGE SIZE Choose an image size.
IMAGE QUALITY Adjust image quality.
PUSH/PULL PROCESSING Adjust exposure.
DYNAMIC RANGE Enhance details in highlights for natural contrast.
D RANGE PRIORITY
Reduce loss of detail in highlights and shadows
for natural-looking results when photographing
high-contrast scenes.
FILM SIMULATION Simulate the effects of different types of film.
MONOCHROMATIC COLOR Add a warm or cool cast to monochrome pictures.
GRAIN EFFECT Add a film grain effect.
COLOR CHROME EFFECT
Increase the range of tones available for rendering
colors that tend to be highly saturated, such as reds,
yellows, and greens.
COLOR CHROME FX BLUE Increase the range of tones available for rendering
blues.
WHITE BALANCE Adjust white balance.
WB SHIFT Fine-tune white balance.
TONE CURVE Adjust highlights and shadows.
COLOR Adjust color density.
SHARPNESS Sharpen or soften outlines.
NOISE REDUCTION Process the copy to reduce mottling.
CLARITY Increase definition.
COLOR SPACE Choose the color space used for color reproduction.
HDR Reduce loss of detail in highlights and shadows.
DIGITAL TELE-CONV.
Process the picture using super-resolution imaging
to create an enlarged copy with a longer apparent
focal length.

5
X100V Owner’s Manual: P207 Ver. 2.00
BRIGHT FRAME POSITION MEMORY
The bright frame moves to show the actual crop when the shut-
ter button is pressed halfway. Choose whether the bright frame
remains in the new position once the button is released.
Normal display Display when shutter
button is pressed halfway
Option Description
ON The bright frame stays in the new position when the shutter button
is released.
OFF The bright frame returns to its normal position when the shutter but-
ton is released.

6
X100V Owner’s Manual: P222, 253 Ver. 2.00
FUNCTION (Fn) SETTING
Assigning Roles to the Function Buttons
Roles That Can Be Assigned to the Function Buttons
Choose from:
•IMAGE SIZE
•IMAGE QUALITY
•RAW
•FILM SIMULATION
•GRAIN EFFECT
•COLOR CHROME EFFECT
•COLOR CHROME FX BLUE
•DYNAMIC RANGE
•D RANGE PRIORITY
•WHITE BALANCE
•CLARITY
•SELECT CUSTOM SETTING
•FOCUS AREA
•FOCUS CHECK
•AF MODE
•AF-C CUSTOM SETTINGS
•FACE SELECT op *
•FACE DETECTION ON/OFF *
•AF RANGE LIMITER
•SPORTS FINDER MODE
•SELF-TIMER
•AE BKT SETTING
•FOCUS BKT SETTING
•PHOTOMETRY
•SHUTTER TYPE
•FLICKER REDUCTION
•ISO AUTO SETTING
•CONVERSION LENS
•ND FILTER
•WIRELESS COMMUNICATION
•FLASH FUNCTION SETTING
•TTL-LOCK
•MODELING FLASH
•FULL HD HIGH SPEED REC
•ZEBRA SETTING
•INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
•MOVIE SILENT CONTROL
•VIEW MODE SETTING
•PREVIEW DEPTH OF FIELD
•PREVIEW EXP./WB IN MANUAL MODE
•NATURAL LIVE VIEW
•HISTOGRAM
•ELECTRONIC LEVEL
•LARGE INDICATORS MODE
•CONTROL RING SETTING
•SPOT METERING LOCK (P7)
•AE LOCK ONLY
•AF LOCK ONLY
•AE/AF LOCK
•AF-ON
•AWB LOCK ONLY
•LOCK SETTING
•PERFORMANCE
•AUTO IMAGE TRANSFER
•SELECT PAIRING DESTINATION
•Bluetooth ON/OFF
•QUICK MENU
•PLAYBACK
•NONE (control disabled)
* Selection via the function buttons is not available when the OVF is dis-
played.

7
SPOT METERING LOCK
If SPOT METERING LOCK is selected, you can press the control to
meter your subject using SPOT metering regardless of the option
currently selected for ASHOOTING SETTING > PHOTOMETRY.
The option selected for ASHOOTING SETTING > PHOTOMETRY
can be restored by pressing the control again.

8
X100V Owner’s Manual: P230 Ver. 2.00
LOCK
Lock selected controls to prevent unintended operation.
Option Description
LOCK SETTING
Choose from the following:
•UNLOCK: Reset lock options.
•
ALL FUNCTION: Lock all controls in the FUNCTION
SELECTION list.
•SELECTED FUNCTION: Lock only the controls selected
in the FUNCTION SELECTION list.
FUNCTION SELECTION
Choose the controls locked when SELECTED FUNCTION
is chosen for LOCK SETTING.
N
•The controls selected using SELECTED FUNCTION can be locked at
any time during shooting by pressing and holding MENU/OK. To unlock
the controls, press and hold the button again.
•The FUNCTION SELECTION > VIEWFINDER SELECTOR option has
changed:
-VIEWFINDER SELECTOR (ROTATE AND HOLD): Lock the feature assigned to
the viewnder selector in its role as a function button.
-VIEWFINDER SELECTOR: Lock the EVF/OVF/ERF display selection.

9
X100V Owner’s Manual: P239 Ver. 2.00
CONNECTION MODE
Adjust settings for connection to external devices.
Option Description
USB CARD READER
Connecting the camera to a computer via USB automatical-
ly enables data transfer mode, allowing data to be copied
to the computer. The camera functions normally when not
connected.
X WEBCAM The camera can be used as a webcam when connected to a
computer running FUJIFILM X Webcam.
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB automatical-
ly enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
•USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the
camera’s image processing engine to rapidly convert RAW
files to high-quality JPEG images.
•BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
camera settings. Reconfigure the camera in an instant or
share settings with other cameras of the same type.
N
Visit the websites below to learn more about or download the follow-
ing computer software:
•Capture One Express Fujilm:
https://www.captureone.com/products-plans/capture-one-express/fujifilm
•Capture One Pro Fujilm:
https://www.captureone.com/explore-features/fujifilm
•FUJIFILM X Acquire:
https://fujifilm-x.com/products/software/x-acquire/
•FUJIFILM X RAW STUDIO:
https://fujifilm-x.com/products/software/x-raw-studio/
•RAW FILE CONVERTER EX powered by SILKYPIX:
https://fujifilm-x.com/support/download/software/raw-file-converter-ex-powered-by-silkypix/
•FUJIFILM X Webcam:
https://fujifilm-x.com/products/software/x-webcam/

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
https://fujifilm-x.com