FujiFilm Finepix Real 3D V1 User manual

Before You Begin
First Steps
Viewing Pictures
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM FinePix
REAL 3D V1 digital viewer and the supplied software.
Be sure that you have read and understood its con-
tents before using the viewer.
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
DIGITAL VIEWER
More Menu Options
Connections
Troubleshooting
Appendix
BL00969-200 EN

ii
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety
and operating instructions
should be read before the ap-
pliance is operated.
• Retain Instructions: The safety
and operating instructions
should be retained for future
reference.
• Heed Warnings: All warnings on
the appliance and in the op-
erating instructions should
be adhered to.
• Follow Instructions: All oper-
ating and use instructions
should be followed.
Installation
Installation
Power Sources: This video prod-
uct should be operated only
from the type of power source
indicated on the marking label.
If you are not sure of the type
of power supply to your home,
consult your appliance dealer
or local power company. For
video products intended to
operate from battery power, or
other sources, refer to the op-
erating instructions.
Grounding or Polarization: This
video product is equipped with
a polarized alternating-current
line plug (a plug having one
blade wider than the other).
This plug will t into the power
outlet only one way. This is a
safety feature. If you are unable
to insert the plug fully into the
outlet, try reversing the plug. If
the plug should still fail to t,
contact your electrician to re-
place your obsolete outlet. Do
not defeat the safety purpose
of the polarized plug.
Alternate Warnings: This video
product is equipped with a
three-wire grounding-type
plug, a plug having a third
(grounding) pin. This plug will
only t into a grounding-type
power outlet. This is a safety
feature. If you are unable to
insert the plug into the outlet,
contact your electrician to re-
place your obsolete outlet. Do
not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload
wall outlets and extension
cords as this can result in a risk
of re or electric shock.
Ventilation: Slots and openings
in the cabinet are provided for
ventilation, to ensure reliable
operation of the video product
and to protect it from overheat-
ing, and these openings must
not be blocked or covered.
The openings should never be
blocked by placing the video
product on a bed, sofa, rug, or
other similar surface.
This video product should not
be placed in a built-in installa-
tion such as a bookcase or rack
unless proper ventilation is pro-
vided or the manufacturer’s in-
structions have been adhered
to. This video product should
never be placed near or over a
radiator or heat register.
Attachments: Do not use attach-
ments not recommended by
the video product manufactur-
er as they may cause hazards.
Water and Moisture: Do not use
this video product near wa-
ter—for example, near a bath
tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement,
or near a swimming pool, and
the like.
Power-Cord Protection: Power-
supply cords should be routed
so that they are not likely to be
walked on or pinched by items
placed upon or against them,
paying particular attention to
cords at plugs, convenience re-
ceptacles, and the point where
they exit from the appliance.
Accessories: Do not place this
video product on an unstable
cart, stand, tripod, bracket, or
table. The video product may
fall, causing serious injury to a
child or adult, and serious dam-
age to the appliance. Use only
with a cart, stand, tripod, brack-
et, or table recommended by
the manufacturer, or sold with
the video product. Any mount-
ing of the appliance should fol-
low the manufacturer’s instruc-
tions, and should use a
mounting accessory recom-
mended by the manufacturer.
Anappliance
and cart
combina-
tion should
be moved
with care.
Quick stops,
excessive force, and uneven
surfaces may cause the appli-
ance and cart combination to
overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an
outside antenna or cable sys-
tem is connected to the video
product, be sure the antenna
or cable system is grounded
so as to provide some protec-
tion against voltage surges and
built-up static charges. Section
810 of the National Electrical
Code, ANSI/NFPA No. 70, pro-
vides information with respect
to proper grounding of the
mast and supporting structure,
grounding of the lead-in wire
to an antenna discharge unit,
size of grounding conductors,
location of antenna discharge
unit, connection to grounding
electrodes, and requirements
for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps
Grounding
Conductors
(NEC SECTION
810-21)
Power Service Grounding
Electrode System (NEC
ART 250. PART H)
Antenna
Discharge
Unit (NEC
SECTION
810-20)
Power Lines: An outside antenna
system should not be located in
the vicinity of overhead power
lines or other electric light or
power circuits, or where it can
fall into such power lines or cir-
cuits. When installing an out-
side antenna system, extreme
care should be taken to keep
from touching such power
lines or circuits as contact with
them might be fatal.
Use
Use
Cleaning: Unplug this video
product from the wall out-
let before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
Object and Liquid Entry: Never
push objects of any kind into
this video product through
openings as they may touch
dangerous voltage points or
short out parts that could re-
sult in a re or electric shock.
Never spill liquid of any kind on
the video product.
Lightning: For added protection
for this video product receiver
during a lightning storm, or
when it is left unattended and
unused for long periods of
time, unplug it from the wall
outlet and disconnect the an-
tenna or cable system. This will
prevent damage to the video
product due to lightning and
power-line surges.
Service
Service
Servicing: Do not attempt to ser-
vice this video product yourself
as opening or removing covers
may expose you to dangerous
voltage or other hazards. Refer
all servicing to qualied service
personnel.
DamageRequiringService: Unplug
this video product from the wall
outlet and refer servicing to
qualied service personnel un-
der the following conditions:
• When the power-supply cord
or plug is damaged.
• If liquid has been spilled, or
objects have fallen into the
video product.
• If the video product has been
exposed to rain or water.
• If the video product has been
dropped or the cabinet has
been damaged.
If the video product does not
operate normally follow the
operating instructions. Ad-
just only those controls that
are covered by the operating
instructions as an improper ad-
justment of other controls may
result in damage and will often
require extensive work by a
qualied technician to restore
the video product to its normal
operation.
When the video product ex-
hibits a distinct change in
performance—this indicates a
need for service.
Replacement Parts: When re-
placement parts are required,
be sure the service technician
has used replacement parts
specied by the manufacturer
or have the same character-
istics as the original part. Un-
authorized substitutions may
result in re, electric shock or
other hazards.
Safety Check: Upon completion
of any service or repairs to this
video product, ask the service
technician to perform safety
checks to determine that the
video product is in proper op-
erating condition.

iii
For Your Safety
Be sure to read these notes before use
Safety Notes
• Make sure that you use your viewer correctly. Read these safety notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incor-
rectly as a result.
WARNING
This icon indicates that death or serious injury can result if the
information is ignored.
CAUTION
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires attention
(“Important”).
Circular icons with a diagonal bar tell you that the action indi-
cated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
WARNING
Unplug from
power socket
If a problem arises, turn the device o and disconnect and unplug the AC
power adapter. Continued use of the device when it is emitting
smoke, is emitting any unusual odor, or is in any other abnormal
state can cause a re or electric shock. Contact your FUJIFILM
dealer.
Do not allow water or foreign objects to enter the device. If water or
foreign objects get inside the device, turn the device o and
disconnect and unplug the AC power adapter. Continued use
of the device can cause a re or electric shock. Contact your
FUJIFILM dealer.
Do not use in
the bathroom
or shower
Do not use the device in the bathroom or shower. This can cause a re
or electric shock.
Do not
disassemble
Never attempt to change or take apart the device. (Never open the casing.)
Do not use the device when it has been dropped or the casing is damaged.
This can cause a re or electric shock. Contact your FUJIFILM
dealer.
Do not change, heat or unduly twist or pull the connection cord and do not
place heavy objects on the connection cord. These actions could dam-
age the cord and cause a re or electric shock. If the cord is dam-
aged, contact your FUJIFILM dealer.
Do not place the device on an unstable surface. This can cause the de-
vice to fall or tip over and cause injury.
Never attempt to view pictures while in motion. Do not use the device
while you are walking or driving a vehicle. This can result in you
falling down or being involved in a trac accident.
WARNING
WARNING
Do not touch any metal parts of the device during a thunderstorm. This can
cause an electric shock due to induced current from the lightning
discharge.
Do not use the battery except as specied. Load the battery as shown
by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject the
battery to impacts. Do not store the battery with metallic products. Any
of these actions can cause the battery to burst or leak and cause
re or injury as a result.
Use only the AC power adapters specied for use with this device. Do not use
voltages other than the power supply voltage shown. The use of other
power sources can cause a re.
If the battery leaks and uid gets in contact with your eyes, skin or clothing,
 u s h t h e a  ected area with clean water and seekmedicalattention orcall an
emergencynumber rightaway.
When carrying the battery, install it in the remote control or keep it in a
plastic case. When storing the battery, keep it in a plastic case. When dis-
carding, cover the battery terminals with insulation tape. Contact with
other metallic objects or batteries could cause the battery to
ignite or burst.
Keep memory cards out of the reach of small children. Because memory
cards are small, they can be swallowed by children. Be sure to
store memory cards out of the reach of small children. If a child
swallows a memory card, seek medical attention or call an emer-
gency number.
CAUTION
CAUTION
Do not use this device in locations aected by oil fumes, steam, humidity or
dust. This can cause a re or electric shock.
Do not leave this device in places subject to extremely high temperatures.
Do not leave the device in locations such as a sealed vehicle or in
direct sunlight. This can cause a re.
Keep out of the reach of small children. This product could cause in-
jury in the hands of a child.
Do not place heavy objects on the device. This can cause the heavy ob-
ject to tip over or fall and cause injury.
Do not move the device while the AC power adapter is still connected. Do
not pull on the connection cord to disconnect the AC power adapter. This
can damage the power cord or cables and cause a re or electric
shock.
Do not cover or wrap the device or the AC power adapter in a cloth or blan-
ket. This can cause heat to build up and distort the casing or
cause a re.
When you are cleaning the device or you do not plan to use the device for an
extended period, disconnect and unplug the AC power adapter. Failure to
do so can cause a re or electric shock.
When a memory card is removed, the card could come out of the slot too
quickly. Use your nger to hold it and gently release the card.
Request regular internal testing and cleaning for the device. Build-up of
dust in the device can cause a re or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every two years.
Please note that this service is not free of charge.

iv
For Your Safety
The Battery and Power Supply
The following describes the proper use of the battery and how
to prolong its life. Incorrect use can shorten battery life or cause
leakage, overheating, re, or explosion.
Cautions: Handling the Battery
• Do not transport or store with metal objects such as necklaces
or hairpins.
• Do not expose to ame or heat.
• Do not disassemble or modify.
• Dispose of used batteries promptly.
• Do not drop or subject to strong physical shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and remote control may become warm to the
touch after extended use. This is normal.
AC Power Adapters
Use only FUJIFILM AC power adapters designated for use with this
device. Other adapters could damage the device.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected to the device.
• Turn the device o before disconnecting the adapter. Disconnect
the adapter by the plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The AC power adapter may hum or become hot to the touch
during use. This is normal.
• If the AC power adapter causes radio interference, reorient or
relocate the receiving antenna.
Using the Device
Electrical Interference
This device may interfere with hospital or aviation equipment.
Consult with hospital or airline sta before using the device in a
hospital or on an aircraft.
Liquid Crystal
In the event that the monitor is damaged, care should be taken
to avoid contact with liquid crystal. Take the urgent action indi-
cated should any of the following situations arise:
• If liquid crystal comes in contact with your skin, clean the area with a
cloth and then wash thoroughly with soap and running water.
• If liquid crystal enters your eyes, ush the aected eye with clean
water for at least 15 minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly with
water. Drink large quantities of water and induce vomiting,
then seek medical assistance.
NOTICES
To prevent re or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” (pages iii–iv) and make sure you understand them before using the device.
Perchlorate Material—special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
For Customers in the U.S.A.
For Customers in the U.S.A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modications not expressly approved in this manual could void the user’s authority to oper-
ate the equipment.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a FUJIFILM-specied ferrite-core A/V cable, USB cable, and
DC supply cord.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.

v
For Your Safety
EC Declaration of Conformity
EC Declaration of Conformity
We
Name: FUJIFILM Electronic Imaging Europe GmbH
Address: Benzstrasse 2, 47533 Kleve, Germany
declare that the product
Product Name: FUJIFILM DIGITAL VIEWER REAL 3D V1
Manufacturer’s Name: FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052 JAPAN
conforms to the following Standards:
Safety: EN60950-1: 2006 + A11: 2009
EMC: EN55022: 1998 + A1: 2000 + A2: 2003 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2006
EN61000-3-3: 1995 + A1: 2001 + A2: 2005
following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Kleve, Germany August 1, 2009
Place Date Signature, Managing Director
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Used Electrical and Electronic Equipment (Applicable in the European Union, Norway, Iceland and Liechtenstein)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this prod-
uct shall not be treated as household waste. Instead it should be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the envi-
ronment and human health, which could otherwise be caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household
waste.
If your equipment contains easy removable batteries or accumulators please dispose these separately according
to your local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please
contact your local city oce, your household waste disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein
If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the
correct way of disposal.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images displayed on your digital viewer cannot be used in ways that infringe copyright laws
without the consent of the owner. Note that some restrictions apply to the photographing of stage performances, entertainments,
and exhibits, even when intended purely for personal use. Users are also asked to note that the transfer of memory cards containing
images or data protected under copyright laws is only permissible within the restrictions imposed by those copyright laws.
Trademark Information
Trademark Information
xD-Picture Card is a trademark of FUJIFILM Corporation. Microsoft, Windows, the Windows logo, Windows Vista and the Windows
Vista logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. “Windows”
is an abbreviation used in reference to the Microsoft Windows operating system. Adobe and Adobe Reader are either trademarks or
registered trademarks of Adobe Systems Incorporated in the U.S.A. and/or other countries. The SDHC logo is a trademark. All other
trade names mentioned in this manual are the trademarks or registered trademarks of their respective owners.
Note: The “Designed for Microsoft® Windows® XP” and “CERTIFIED FOR Windows Vista™” logos apply only to the viewer and viewer
hardware driver.

vi
Viewer Q & A
Find items by task.
Viewing Pictures
Viewing Pictures
Question
Question
Key phrase
Key phrase
See page
See page
How do I view Cpictures? Viewing Cimages 17
How do I adjust parallax?
How do I view a lot of pictures at once? Multi-frame playback 16
How do I nd pictures? Multi-frame playback 16
Image search 18
Can I view my pictures in a slide show? Slide show 12
Can I choose how long each slide is displayed? Slide show time/frame 22
Can I select just one picture for display? Single image 14
Can I enlarge part of a picture for display?
Playback zoom 15Can I choose the area displayed?
How do I display pictures at their original size?
Can I rotate pictures? Orientation 22
Can I display the time or date? Clock/calendar 19
Other Operations
Other Operations
Question
Question
Key phrase
Key phrase
See page
See page
What are the parts of the viewer and remote control called? Parts 3
How do I delete pictures? Erase 20
How do I set the clock? Date/time 10
How do I restore factory settings? Reset 22
Can I copy pictures from a camera or other device via infrared? Infrared (IR) 23
Can I connect to a computer and copy pictures via USB? Connecting to
a computer 24
How do I change viewer settings? Setup 21

vii
Table of Contents
For Your Safety..................................................................................................................................................... ii
IMPORTANT SAFETY INSTRUCTIONS.......................................................................................................... ii
Safety Notes........................................................................................................................................................iii
NOTICES ...............................................................................................................................................................iv
Viewer Q & A.........................................................................................................................................................vi
Viewing Pictures.............................................................................................................................................vi
Other Operations ...........................................................................................................................................vi
Before You Begin
Before You Begin
Viewing 3D Images ............................................................................................................................................1
Getting Started....................................................................................................................................................2
Symbols and Conventions..............................................................................................................................2
Package Contents..............................................................................................................................................2
Parts of the Viewer and Remote Control ..................................................................................................3
First Steps
First Steps
Readying the Remote Control.......................................................................................................................5
Replacing the Battery ......................................................................................................................................6
Attaching the Stand ..........................................................................................................................................7
Inserting Memory Cards..................................................................................................................................8
Turning the Viewer On .....................................................................................................................................9
Basic Setup...........................................................................................................................................................10
Viewing Pictures
Viewing Pictures
Slide Shows..........................................................................................................................................................12
Choosing a Slide Show Type........................................................................................................................12
Displaying Selected Images.........................................................................................................................14
Playback Zoom .................................................................................................................................................15
Multi-Frame Playback ....................................................................................................................................16
Viewing CImages..........................................................................................................................................17
More Menu Options
More Menu Options
IMAGE SEARCH...................................................................................................................................................18
CLOCK/CALENDAR ...........................................................................................................................................19
ERASE .....................................................................................................................................................................20
SET-UP....................................................................................................................................................................21
Setup Menu Options ..................................................................................................................................... 22
Connections
Connections
Copying Pictures via Infrared..................................................................................................................... 23
Connecting to a Computer...........................................................................................................................24
Installing FinePixViewer................................................................................................................................24
Copying Pictures to the Viewer................................................................................................................. 25
Troubleshooting
Troubleshooting
Troubleshooting................................................................................................................................................26

viii
Table of Contents
Appendix
Appendix
Glossary.................................................................................................................................................................28
Memory Cards....................................................................................................................................................29
Specications .................................................................................................................................................... 30
FUJIFILM Worldwide Network ....................................................................................................................31

1
Before You Begin
Viewing 3D Images
The FinePix REAL 3D V1 displays Cphotographs taken
with cameras such as the FinePix REAL 3D W1 (pg. 17). C
images are best viewed from a position directly in front of
the screen (or, if more than one person is present, slightly
to one side) at a distance of about 60 cm (2ft.).
CDisplay
The FinePix REAL 3D V1 uses a parallax barrier consisting of a
series of slits placed over a pair of images with dierent par-
allax displayed in a series of alternating strips, allowing each
eye to see a dierent image and creating the illusion of depth
when the screen is viewed at the proper angle and distance. A
consequence of this is that the Ceect is only visible from
certain angles.
Parallax
barrier
Slit
3Caution: Using the FinePix REAL 3D V1
Ddisplay is recommended for young children (up to the age of about six) whose visual system
is still maturing and for individuals with notable dierences in vision between their two eyes, who
may nd it dicult or impossible to observe the Ceect. The Ceect is only visible from
certain angles and may not be visible at high magnications. Should you experience fatigue or
discomfort while viewing Cimages, cease use immediately. A ten-minute break is recommend-
ed about once every half hour. Switch to Dimmediately if Cimages still appear double after
you have adjusted parallax. Individuals with a history of photosensitive epilepsy or heart disease
or who are unwell or suering from fatigue, insomnia, or the eects of alcohol should refrain from
viewing Cimages. Viewing Cimages while in motion may cause fatigue or discomfort.

2
Before using the FinePix REAL 3D V1 digital viewer, read the warnings on pages ii–v and
take a few minutes to familiarize yourself with the terms and conventions used in this
manual. For information on specic topics, consult the sources below.
✔
✔
Viewer Q & A (pg. vi)
Viewer Q & A (pg. vi)
Know what you want to do but don’t
know the name for it? Find the answer in
“Viewer Q & A.”
✔
✔
Table of Contents (pg. vii)
Table of Contents (pg. vii)
The “Table of Contents” gives an overview
of the entire manual. The principal digital
viewer operations are listed here.
✔
✔
Troubleshooting (pg. 26)
Troubleshooting (pg. 26)
Having a specic problem with the digital
viewer? Find the answer here.
✔
✔
Glossary (pg. 28)
Glossary (pg. 28)
The meanings of some technical terms
may be found here.
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
3Caution: This information should be read before use to ensure correct operation.
1Note: Points to note when using the device.
2Tip: Additional information that may be helpful when using the device.
Menus and other text in the display are shown in bold. In the illustrations in this manual,
the display may be simplied for explanatory purposes.
Package Contents
Package Contents
Before using the viewer, conrm that the package contains these items:
3
D/
2
D
POWER
MENU
/OK
DISP
/BACK
VOLUME
PARALLAX
SLIDE SHOW
FinePix REAL 3D V1
digital viewer
Remote control
(ships with battery installed)
Stand
• USB cable
• Warranty
• Owner’s Manual (this manual)
AC power adapter Software CD
Memory Cards
This product supports xD-Picture Card, and SD and SDHC memory cards. In this manual, these
are referred to as “memory cards.” For more information, see page 29.
Getting Started

3
Before You Begin
Introduction
Parts of the Viewer and Remote Control
Parts of the Viewer and Remote Control
The same numbers are used for controls that appear both on the viewer and the re-
mote. Unless otherwise noted, the controls on the remote perform the same functions
as those on the viewer; the descriptions in this manual generally refer to the remote.
3 D / 2 D
POWER
MENU
/OK
DISP
/BACK
VOLUME
PARALLAX
SLIDE SHOW
No.
No.
Viewer (front view)
Viewer (front view)
Remote control
Remote control
Page
Page
1 Infrared receiver (for remote control) — 5
2 Infrared data port (for data transfer) — 23
3 Display — —
4 g(3D/2D) button g3D/2D button 17
5 Q(parallax) button QPARALLAX (+/–) buttons 17
6 I(slide show) button ISLIDE SHOW button 12
7MENU/OKbutton MENU/OK button 10
8DISP/BACKbutton DISP/BACK button 15
9 6button 6button
10
10 7button 7button
11 Touch bar (left/right) 8button
12 9button
13 —VOLUME (e/b) buttons —
14 (See back view) POWER button 9
15 —Batteryholder 6

4
Introduction
OPEN
No.
No.
Viewer (back view)
Viewer (back view)
Page
Page
1 Memory card slot cover 8
2 Stereo speakers —
3 T(power) button 9
4 Tripod mount 7
5 Hole for stand 7
6 USB host connector —
7 Connector for AC power adapter 9
8 Mini-B USB connector 25
9 Memory card slot 8

5
First Steps
Readying the Remote Control
A battery is inserted in the remote control at shipment.
Before using the remote control, remove the plastic insu-
lating sheet from the battery chamber.
1Note
The battery supplied with the remote control is intended for
trial use only. Replace the battery as described on page 6 if the
remote control does not function as expected. Insulating sheet
Using the Remote
Point the remote at the infrared receiver on the digital viewer.
Infrared receiver
Approx. 3 m (9.8 ft.)
or less
Maximum vertical and
horizontal angle approx. 30°
3Caution
Do not place stickers or other obstructions over the infrared receiver.

6
Readying the Remote Control
Replacing the Battery
Replacing the Battery
If the remote control does not function as expected, replace the battery with a fresh
CR2025 battery (available separately from third-party suppliers).
1Turn the remote control over and remove the battery holder.
Remove battery
holder, keeping latch
pressed to right
2Remove the old battery from the holder and insert a fresh battery as shown, with the
“+” indicator uppermost.
3Caution
Insert the battery in the correct orientation.
3Slide the holder into the remote control until the latch clicks into place.

7
First Steps
Attaching the Stand
Attach the stand to the frame.
1Place a towel or other soft cloth on a level surface such as a table and place the viewer
face down on the cloth.
2Gently screw the stand into the hole on the back of the viewer as shown.
①
②
3Stand the viewer as shown.
Wide orientation Tall orientation
1Note
The stand can be used in tall orientation when viewing Dimages, but must be in wide ori-
entation to provide a Ceect with Cimages. Tall orientation pictures can be rotated for
display in wide orientation using the ORIENTATION option in the setup menu.
3Caution
The viewer should only be used on a table or other at horizontal surface; do not hang the viewer
from a picture hook or mount it on a wall or other vertical surface using double-faced tape.
2Tip: The Tripod Mount
The viewer can also be placed on a tripod using the tripod mount.

8
Inserting Memory Cards
The viewer can be used with the memory cards listed on page 29 (for information on
supported le formats, see page 30). Before inserting memory cards into the viewer, be
sure to copy any important les to a computer. To insert a memory card:
1Open the card slot cover.
1Note
The viewer turns o automatically when the cover is opened.
2Holding the memory card as shown by the indicator next to the memory card slot,
slide the card in until it clicks into place.
SD/SDHC
card
xD-Picture
card
3Caution
Be sure the card is in the correct orientation; do not insert it at an angle or use force.
1Note
The viewer may be unable to display les that have been modied with a computer.
Removing Memory Cards
Open the card slot cover, gently press the card in, and release it slowly.
3Caution
The memory card may spring out if you remove your nger immediately after pushing the card in.

9
First Steps
Turning the Viewer On
Connect the supplied AC power adapter and turn the viewer on.
1Connect the AC power adapter to the viewer as shown and then plug the adapter
into a power outlet.
3Caution
Use only the supplied AC power adapter. Do not use the viewer with other power adapters.
2Press the power button to turn the viewer on. A welcome screen will be displayed
and then a slide show will begin automatically, accompanied by background music.
3 D / 2 D
POWER
MENU
/OK
DISP
/BACK
VOLUME
PARALLAX
SLIDE SHOW
OPEN
1Notes
• If no pictures are available when the viewer is turned on, either because the memory card
inserted in the viewer contains no pictures or there are no pictures in internal memory when
no memory card is inserted, the main menu (pg. 10) will be displayed.
• To turn the viewer o, press the power button again.
Demo Images and Background Music
The viewer ships with a slide show in internal memory consisting of demo images illustrating
some of the product’s key features and accompanied by a background track. If no memory
card is inserted when the viewer is turned on, the demo slide show will begin automatically (if a
memory card is inserted, the viewer will instead display the images on the memory card). The
sound track can be turned o by selecting OFF for MUSIC in the SLIDE SHOW menu (pg. 13);
the images in the demo slide show can be deleted as described on page 20.

10
Basic Setup
Before using the viewer for the rst time, choose a language and set the clock. Setting
the clock to the correct time and date makes it possible to use the clock calendar display
(pg. 19).
1Press MENU/OK to display the main menu.
The Main Menu
The main menu contains the following options:
Option
Option
Description
Description
SLIDE SHOW View slide shows (pg. 12).
SINGLE IMAGE Display a selected picture (pg. 14).
IMAGE SEARCH Find pictures (pg. 18).
CLOCK/CALENDAR Choose a clock calendar display (pg. 19).
EDIT Delete pictures (pg. 20).
SET-UP Adjust viewer settings (pg. 21).
SLIDE SHOW
SINGLE IMAGE
IMAGE SEARCH
CLOCK/CALENDAR
EDIT
SET-UP
SELECT SET
2Press 6or 7to highlight SET-UP and press MENU/OK.
3Press 6or 7to highlight aand press MENU/
OK to display the options shown at right.
4Press 6or 7to highlight the desired language and
press MENU/OK to return to the setup menu.
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
SELECT SET
5Press 6or 7to highlight DATE/TIME and press MENU/
OK to display the options shown at right.
6Press 8or 9to highlight the year, month, day, hour,
minute, or date format and press 6or 7to change.
Press MENU/OK to return to the setup menu when set-
tings are complete.
Y.M.D
D.M.Y
2009 12 31 12 31 PM
M.D.Y
SELECT SETSELECT
7Press DISP/BACK once to exit the setup menu and again to exit the main menu.

11
First Steps
Basic Setup
2Tip: Viewing the Time and Date
The current date and time are displayed in the viewer when an option other than OFF is selected
for CLOCK in the CLOCK/CALENDAR menu (pg. 19).
1Note
The clock will be reset if the viewer is without power for an extended period.

12
Viewing Pictures
Slide Shows
A slide show will begin automatically when the viewer is turned on (pg. 9). If no memory
card is inserted, the pictures in internal memory will be displayed (a demo slide show will
be displayed if internal memory contains no other pictures); if a memory card is inserted,
the pictures on the memory card will be displayed. A slide show can also be displayed
by pressing the Ibutton on the viewer or remote control or by selecting PLAYBACK
for SLIDE SHOW in the main menu.
1Note
The length of time each slide is displayed can be selected using the SLIDESHOW TIME/FRAME
option in the setup menu (pg. 22).
Choosing a Slide Show Type
Choosing a Slide Show Type
The type of show can be changed by pressing Iwhile a slide show is in progress.
1Press the Ibutton while a slide show is in progress. A mode selection menu will be
displayed.
2Press 6or 7to highlight TYPE and press MENU/OK.
The options shown at right will be displayed.
3Press 6or 7to highlight the desired type and press
MENU/OK to restart the slide show.
1Note
The slide show type can also be selected using the SLIDE
SHOW option in the main menu.
NORMAL
FADE-IN
FADE-IN FROM BLACK
FADE-IN FROM WHITE
FADE-IN & ZOOM IN
FADE-IN FROM BLACK & ZOOM IN
1/20
SELECT SET
NORMAL
FADE-IN
FADE-IN FROM BLACK
FADE-IN FROM WHITE
FADE-IN & ZOOM IN
FADE-IN FROM BLACK & ZOOM IN
1/20
SELECT SET