Full Swing KIT User manual

FULL SWING KIT USER GUIDE

CONTENTS
Legal Noces
Before First Use
Copyright Noce
Meet The Full Swing KIT
Contents
Compability
LED States
Seng Up the KIT
Charge the KIT
Download the Full Swing App
Create a Full Swing Account
Pairing the KIT
Congure Wi-Fi
During First-Time Pairing
Congure or Change Wi-Fi Network Manually
Update Firmware
KIT Placement
Using the App
Starng a Pracce Session
Pracce Session with an Exisng KIT
Pracce Session with a New KIT
Understanding the Live Session View on iPhone
Last Shot Tab
Dispersion Tab
All Shots Tab
Starred Tab
Session Sengs
Understanding the Live Session View on iPad
Dispersion Tab
Last Shot Tab
All Shots Tab
Starred Tab
Session Sengs
Understanding Historical Data Views
Stats
Sessions
Starred
User Account and Preferences
Subscripon
My Bag
My Devices
Using the Apple Watch
Using the KIT Without the App
Main Menu
Select a Club
4
4
4
5
5
5
6
7
7
7
8
8
9
9
9
10
11
12
12
13
13
14
14
15
15
16
16
18
18
19
20
20
21
23
23
24
26
26
27
27
28
29
30
31
31

Set Target Line
Data Views
Units of Measurement
Connecon Info
Baery Info
Device Info
Safety and Regulatory
Advanced Features
Maintenance
Caring for the KIT
Best Pracces for KIT Storage
Baery Safety Warnings
Troubleshoong the App
Support
31
31
32
32
32
32
33
33
34
34
34
35
36
37

LEGAL NOTICES
BEFORE FIRST USE
COPYRIGHT NOTICE
Carefully review the Full Swing Golf (doing business as Full Swing) Full Swing KIT User Guide
as it contains informaon regarding safe usage and storage of the Full Swing KIT. Failure to read
and follow these noces and guidelines may result in serious injury or death.
Full Swing has made every eort to provide clear, complete, and accurate informaon in the
Full Swing KIT User Guide. Full Swing will not be held responsible for issues arising due to
typographical errors or user interpretaon of the language used herein that is dierent from
that intended by Full Swing. All safety informaon and guidelines are subject to change due to
changes in local, federal, and all other applicable laws. Full Swing reserves the right to revise this
document and to make changes in the content without obligaon to nofy any persons of such
revisions or changes. In no event shall Full Swing, its employees, or authorized representaves
be liable for any damages or losses, direct or indirect, arising from the use of any technical or
operaonal informaon contained in the Full Swing KIT User Guide.
Any unauthorized changes or modicaons to the Full Swing KIT without wrien permission
from Full Swing will void the warranty of the Full Swing KIT and user authority to operate the
Full Swing KIT.
This Full Swing KIT User Guide is copyright 2021 Full Swing Golf (doing business as Full Swing).
All worldwide rights and remedies under all intellectual property laws and industrial property
laws are reserved. Full Swing Golf Registered U.S. Patent and Trademark Oce.

The Full Swing KIT, going forward, is referred to only as KIT in this user guide.
• iPhone® (10 and higher), running iOS 14 and higher
• iPad® (7th generaon and higher), running iOS 14 and higher
• iPad® Air (3rd generaon and higher), running iOS 14 and higher
• iPad® Pro (all models), running iOS 14 and higher
• Apple Watch® 3 or higher, running watchOS 7 or higher
• Apple AirPods® or most any Bluetooth® headphones
• Carrying Case
• KIT Launch Monitor
• Charging Cable
• Charger
MEET THE FULL SWING KIT
COMPATIBILITY
CONTENTS

Use the following LED styles to determine the state of the KIT.
App connected
Status LED Acvity Status Descripon
Boot up
Charging
Installing update
Power down
Power up
Seek
Tracking
Warnings
A warning state has occured,
for example:
• Temp warning at 53°C/127°F
• Temp shutdown at 55°C/131°F
• Baery level warning at 10%
• Baery level shutdown at 1%
• App disconnect warning
A ball is in ight and is currently
being tracked.
The unit radar is acve and ready
to track a shot.
The unit is currently powering up.
The unit is currently powering down.
The rmware is currently updang.
The unit is preparing to operate.
The app is connected to the
Bluetooth and Wi-Fi.
The unit is charging
(When the bar turns solid white,
the unit is fully charged.)
LED STATES

Cauon: Use only the equipment provided with the KIT. Using non-product specic
chargers and cables may result in damage to the KIT.
1. Gently open the rubber charging port cover on the le side of the KIT, then aach the
charging cable.
2. Insert the charging cable into the charger and insert the other end of the charger into the wall.
Note: Charging begins automacally and may take up to 5 hours.
Note: It is possible to pair and congure the KIT while charging.
The Full Swing app is compable with Apple iPhone® and
iPad® running iOS 14 or higher.
Download the app by QR Code or through the Apple App Store.
QR Code
1. Open the iPhone/iPad camera to be paired with the KIT.
2. Hold the camera over the QR Code so that the QR Code
is clearly visible in the screen.
Note: The camera should automacally scan the QR Code.
3. Follow the Apple App Store prompts.
Apple App Store
1. Open the iPhone/iPad to be paired with the KIT.
2. Click hp://appstore.com/fullswing, or open the Apple App
Store, then search for Full Swing.
3. Select the Full Swing app, then click Get.
4. Follow the Apple App Store prompts.
SETTING UP THE KIT
CHARGE THE KIT
DOWNLOAD THE FULL SWING APP

Use these steps to create an account on the app.
1. Open the app, then click the Create a Full Swing Account buon.
2. Enter the requested user informaon in the elds.
3. Click the Create Account buon.
Note: A screen with the message Please Check Your Email opens and directs the user
to conrm the email.
4. Open the email account, then click the Verify Email link.
Note: If no email arrives, return to the app, click the Re-send link, and follow the prompts.
5. Return to the app.
Note: A screen with the message Welcome to Full Swing! opens.
6. Follow the prompts to complete the prole setup.
CREATE A FULL SWING ACCOUNT
Use these steps to pair the KIT with the mobile device.
1. Conrm the KIT is plugged in and charging, but do not power on at this me.
Powering on the KIT occurs later.
2. In the Pair Device screen, tap the Find Devices buon.
3. Follow the onscreen instrucons to pair the KIT.
Note: If there are mulple units, tap the Power buon on the unit and locate the
Device Name in the upper le corner of the OLED display.
Note: If pairing is unsuccessful, visit the Help Center at kitsupport.fullswinggolf.com
PAIRING THE KIT

Connecon to Wi-Fi is required for rmware updates. When connected, any new rmware
updates will automacally download and install. Wi-Fi can be congured using one of
two methods:
When pairing with the KIT for the rst me, the user is prompted to congure Wi-Fi.
1. On the Congure Device screen, select a familiar Wi-Fi name from the opons provided.
2. Follow the prompts to congure Wi-Fi.
The Wi-Fi network can be congured or changed at any me using the following method.
Note: The unit must be paired, and in charging mode or powered on, to modify Wi-Fi sengs.
If the KIT does not appear on the My Devices screen, see Pairing the KIT.
1. From the Pracce tab, tap the Prole icon in the upper, le corner.
2. Tap My Devices.
3. Tap the Device Name to be modied.
4. In the Wi-Fi Network secon, tap the Congure or Change buon.
5. Follow the prompts to modify Wi-Fi sengs.
CONFIGURE WI-FI
DURING FIRST-TIME PAIRING
CONFIGURE OR CHANGE WI-FI NETWORK MANUALLY

New rmware updates will automacally download and install when the unit is connected to
Wi-Fi. Download me is dependent on Internet speed. Following download, rmware
installaon could take up to 15 minutes to complete.
Note: The LED ashes amber while the rmware installaon is underway. Do not power o
the unit aer the rmware installaon begins and unl installaon is complete.
1. Ensure the unit is plugged into the charger but do not power the unit on.
Note: Firmware updates will automacally download and install while in charging mode.
If the KIT is fully powered on (with the LED bar pulsing blue), the rmware update will
download; however, installaon will not happen unl the next me the KIT is powered
on or o.
2. Ensure the unit is connected to Wi-Fi.
Note: If unsure, tap the Power buon to view Wi-Fi indicator in the upper, right corner.
For addional informaon, see Congure Wi-Fi.
3. Allow any rmware updates to download and install prior to operang the unit.
An amber LED indicates that the rmware is
currently updang. However, if the LED
is pulsing blue, do not power o the unit
because installaon is underway.
UPDATE FIRMWARE