fully Fully Swivel CPU Holder User manual

CPU holder
Assembly instructions
For assembly assistance,
call 888-508-3725
or email [e-mail]

1
Caution
Read this entire instruction manual before you start installation and assembly. If you have any questions
regarding any of the instructions or warnings, please contact Fully.
Use with products heavier than the 22lbs rated weight indicated may result in instability causing possible
injury. Mounts must be attached as specified in assembly instructions. Improper installation may result in
damage or serious personal injury.
This product contains small items that could be a choking hazard if swallowed. Keep those items away from
children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and
personal injury.
Important: Ensure that you have received all parts according to the component checklist prior to installa-
tion. If any parts are missing or faulty, contact Fully.
In the box
A. CPU holder x1 B. Adhesive Foam x12
Hex Wrench x1 Philips Screwdriver (not included)
C. Screws x4 D. Washers x4
Flat Screwdriver (not included)

2
Step 1
B
4mm
B C
C
B
B
4mm
B C
C
B
Step 2
B. Adhesive Foam x12
B
4mm
B C
C
B
Step 3

3
version 061818a
Step 4
Step 5
2
AB
1 2
1
o r
C. Screws x4 D. Washers x4