
10
Getting started Optimal AI Performance
Display Ignore
1.
3.
4.
2.
Front / Display
1. Assemble Innex Cube with 2 or 3 poles.
2. Connect the USB cable. Plug the USB-C end to Innex Cube and USB-A
end to a USB3.0 port of your computer.
3. Once the Cube is powered, the LED will start ashing. Wait until the LED is
o before selecting Cube as camera in video conference software. When the
Cube is selected as active camera, the LED will be on.
4. Point the Front Arrow toward the front of the meeting room where the
display is usually located.
5. Press the Mode button on the camera or the buttons on the remote
control to switch video modes. (By default, Cube starts in AI Dedicated
Focus mode.)
Long press the camera's " " button or short press the or
button on the remote control to switch between AI mode and Manual Mode.
Press the camera's " " button or the " " button on the remote control
to rotate through corresponding modes available in the AI mode and the
Manual mode.
In AI mode: Dedicated Focus/ Auto-Framing/ Stage modes.
In Manual mode: Conversation/ 360° Panorama/ 270°/ 180°/ 120°/ 90°.
With an eective coverage within a 2.5 meter detection radius and a
number of 12 people, AI modes are recommended to be used in small-
sized to medium-sized conference rooms. To use Cube in a large-
sized conference room, please consider using Manual modes for the
best experience.
Cube's AI uses an advanced
algorithm to optimize its detection
and its positioning of people's
upper body to better include
people's hand gestures which is
as important as their faces.
The AI is trained to automatically ignore people appearing in a display.
However, it works best when the Cube gets a clear, unobstructed line of
sight on the display. Any object or person that partially blocks and
alternates display's rectangular shape can lower the AI's success rate.
Only connect to USB 3.0 port of the PC or the
USB hub. (For some USB hub,external power
supply maybe required.)
11
4m
5m
2.5 m
Medium-sized conference room