Furn Mill BOSTON SLIDING BED User manual

ASSEMBLY INSTRUCTION
BOSTON SINGLE BED PRODUCT CODE: HOBED00030
ASSEMBLY RATING
TheAssembly Rating is a 5-point
system that shows the degree of effort
needed in assembling aspecific
product (with 1 being easy and 5 being
difficult).
For most products, two
persons are recommended.
EASY DIFFICULT
Requirement forAssembly
1/1
2 PERSONS RECOMMENDED
BOSTON SLIDING BED

HARDWARE QTY.
HARDWARE DETAIL ASSEMBLED PRODUCT
1/2
(BED CLAMP 100mm)
8
(SCREW3.5X16mm)
64
(SCREW-35mm)
16

1/3
STEP 01
Fix the Part -A(Headboard),Part-B(FootBoard)&Part-C(Sides) with Bed clamp
using screws (16mm) with the help of Screw driver at Defined Position A1,A2,A3
& A4 As shown in Fig.

1/4
STEP 02
Place the Part-D (Strips Panel) on last assembled part
before wooden block as shown in the fig.

1/5
STEP 03
Fix the Part –E & Part-F with Bed clamp using screws (16mm) with the
help of Screw driver at Defined Position B1,B2,B3 & B4 As shown in Fig.

1/6
STEP 04
Fix the Part-H with last assembled part using Screws(35mm) with the
help of screw driver at Defined Position C1,C2,C3 & C4 As shown in Fig.
STEP 05
Place the Part-G (Strips Panel) on last assembled part
before wooden block as shown in the fig.

1/7
Your Boston Single Bed is Ready

7KDQN\RXIRU\RXUSXUFKDVH
We hopeyouwillenjoyyournewproductformanyyearstocome.Ourcommitment toproviding
qualityproducts does notsimplyendwhen a purchaseismade.Westandbehindourproductsand will
provideanysupport neededinorderforyoutofullyenjoyyourpurchase.Yoursatisfactionisthe
greatestrecognitionwe couldhave.
Because we value your trust in our company, we will do our best to meet your service expectations.
Should you have anyassemblyrelatedquestions,partsreplacementrequests,commentsorsuggestions,
pleasefeelfreeto contact us any time.To help expedite the service, please have the assembly
instructions available, along with yourorderreceipt.
Note:
Do notdisposeofanypackagingorcontentsoftheshippingcartonuntilassemblyiscompleted toavoid
accidentallydiscardingsmall partsor hardware.
&$5(,16758&7,216
&OHDQ
Dust off with a soft dry cloth only.
For cleaning, use a mild cleansing agent. Do not use agents with sanding properties or

which contain 
ammonia or bleach.
6WDLQV
Take care of spills immediately. Absorb the spill with a clean white cloth or paper towel.

Gently dab 
the surface and lift the stains.
$YRLG
Keep the furniture away from direct sunlight and away from heat sources; excessive

exposure to
sunlight may fade the colour

of the upholstery.
To protect furniture from moisture, avoid placing the furniture in direct contact with damp

walls. In
case of contact, wipe the furniture promptly with a dry, soft and lint-free cloth.
Always use a coaster and mats while placing hot, cold or wet materials on the furniture to

avoid 
surface damage.
$OZD\VOLIWDQGSODFHIXUQLWXUHSLHFHVZKLOHUHSRVLWLRQLQJ'UDJJLQJWKHIXUQLWXUHRYHUDSURORQJHG
SHULRGRIWLPHFDQZHDNHQWKHMRLQWV
Avoid using furniture polish, chemical solvents and cleaners for our range of children’s

furniture.