FURNA FURNA E-TOP User manual

FURNA E-TOP
ASSEMBLY GUIDE

STEP 1 STEP 2
Insert main column (Part A) through Part B (base)
Use 4 screws (Part F) on each and tighten loosely at
the points shown to attach the central column to the
base.
Connect the two wires as shown in the top of the
picture. Fold wires to hide in the space provided.
Unscrew 4 screws to take o cap.
IMPORTANT NOTE:
Don’t tighten all screws/bolts until all the pieces are completely assembled or once otherwise instructed to.
It is recommended that 2 people work together to complete this assembly most eectivel
Two people are required to
assemble and move this model.
1 Pc 1 Pc 1 Pc 1 Pc 1 Pc
A DB EC
1 Pc4 Pc18 Pc
M6 x 10 3 mm
4 mm
M5 x 8
4 Pc 1 Pc
JG
K
H IF
F
K

STEP 5
Assemble the bottom cover (Refer to Step 1)
Place keyboard panel (Part C) through central
column.
Screw in 8 x screws (Part F) to secure Part C
on to the main column.
F
K
x 8
x 1
STEP 3
Two people are required to
assemble and move this model.
Insert Part H in place
around the main column
where it meets the base
(Part B).
STEP 4
Use 2 x screws (Part F) on each to secure Part A
main column at the rear. Then fully tighten all 6
screw positions (including the rst 4 screws from
Step 2).
J
F
K

STEP 6
STEP 7
Use 4 x Part G screws to secure the
desk top in place.
Connect power cable to power source
and press UP button to put the E-Top
in position to complete Step 7 more
easily.
Two people are required to
assemble and move this model.

STEP 8
STEP 9
Part E (VESA monitor mount) can
be assembled facing up or down
for increased height range.
Assembly complete.
Touch and button to adjust height.
Two people are required to
assemble and move this model.
F
M

Need help?
Get in touch by emailing [e-mail] or
by using our Live Chat feature on our website!