Furniture of America CM-BK119 User manual

1. Insert 2 half round nuts (#A)
into the holes along the sides
of the rails (#4,5).
2. Align the ends to the holes along the
upper HB (#1,2), then insert 2 bolts
(#A) into each end along the head-
boards. Secure using the Allen wrench.
1. Insert 2 wood dowels (#G) into each end of the long guardrails (#6) and
into one end of the short guardrails (#7). After that insert the other ends
of those dowels (#G) into the holes along the upper HB (#1,2).
2. Insert the screw bolts (#C) into
the holes along the sides of the
upper HB (#1,2). Secure.

1. Insert 2 wood dowels (#G) in
to the end of the short guard-
rails (#7). After that insert the
other ends of those dowels
(#G) into the holes along the
guardrail attachment (#11).
Insert a screw bolt (#D) into
each hole along the attach-
ment (#11). Secure.
2. Insert 2 bolts (#B) and secure
using the Allen wrench (#J).
Align the guardrail supports (#12)
to the holes along the rails, then
insert a screw (#H) into each
hole. Secure using a screwdriver.

1. Insert 2 half round nuts (#A)
into the holes along the sides
of the rails (#5).
2. Align the ends to the holes along the
lower HB (#3), then insert 2 bolts
(#A) into each end along the head-
boards. Secure using the Allen wrench.
Insert a metal dowel (#F) into
the holes along the lower bed,
then carefully place the upper
bed onto those metal dowels.

1. Insert the ladder steps (#10) into the slots along the ladder rails (#8,9).
2. Insert a bolt (#E) into each end, then secure using the Allen wrench (#J).
Hook the ladder onto the rail, then insert a
screw (#I) into each. Secure using a screwdriver.

Place the twin slat kits (#13)
onto the rails, then insert a
screw (#H) into each end.
Secure using a screwdriver.