Furuno NAVpilot-700 User manual

85 3.3"
115 4.5"
Fixing hole
220 8.7"
206 8.0"
40 1.6"
26 1.0"
41 1.6"
#40 1.6" #40
1.6"
100 3.9"
Cut-out for ush mount
206 8.1"
85 3.3"
48
1.9"
4- 3.2
89
90
216 8.5"
#40 #40
100 3.9"
Cut-out for ush mount
228 9.0"
113 4.4"
60 2.4"
4-R5
218 8.6"
111 4.4"
24 0.9"
10 0.4"
58 2.3"
#40 1.6" #40 1.6"
89
Fixing hole
239 9.4"
228 9.0"
60 2.4"
125 4.9"
4- 3.2
13105SS Printed in Japan
Catalogue No. M-1551d
All brand and product names are registered trademarks, trademarks
or service marks of their respective holders.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.furuno.com
SPECIFICATIONS
NAVpilot-700 Control Unit (Surface-mount)
0.62 kg 1.4 lb
NAVpilot-700 Control Unit (Flush-mount)
0.64 kg 1.4 lb
NAVpilot-711C Control Unit (Surface-mount only)
0.33 kg 0.7 lb
CONTROL UNIT
PROCESSOR UNIT
Heading deviation, Cross-track error*, Ship's speed*, Depth*, Water temperature*, Wind*, Watch, Log trip*, * external data required
INTERFACE
CAN bus: 1, NMEA0183: 2
ENVIRONMENT
POWER SUPPLY
Display
Effective Display Area
Pixel Number
Backlight
Contrast
Rudder Angle Adjustment
Sea Condition Adjustment
Rudder Angle Settings
Alarm
Ports
Input
Output
Temperature
Waterproong Processor unit
Other unit
STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*, Wind*, Fish HunterTM** external data required
85.2 (W) x 85.2 (H) mm
160 x 160 dots
16 steps
82.6 (W) x 61.9 (H) mm
320 x 240 dots
-
8 steps
4.1” Color LCD4.6” Monochrome LCD
AUTO/MANUAL-CALM/MODERATE/ROUGH
10 - 45 deg
EQUIPMENT LIST
Standard
Options
(NMEA0183) AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW, VTG,
VWR, VWT, XTE, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/464/720/992/996, 127250/251/258/488/489, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/313/314/577/880
(NMEA0183) DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB, RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/464/720/992/996, 127237, 245/250/251/258, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/822/823
-15˚C to +55˚C
IP20
IP56
12-24 VDC: 4.0 - 2.0 A (excluding pump)
Control Unit (FAP-7001 or 7011C), Processor Unit FAP-7002, Installation Materials and Spare Parts
Control Units, Flush Mount Kits, Bracket-mount Kits, Cradle, Rudder Reference Units FAP6112-200,
Remote Controllers, Cables, Connectors, Junction Box, Pump Unit, FPS8 Power Steering Module, Volvo Interface Kit FAP-6300
NAVpilot cable
CAN bus
Others
255 10.0"
90 3.5"
259 10.2"
219 8.6"
Processor Unit FAP-7002
1.9 kg 4.2 lb
260 10.2"
220 8.7"
127 5"
115 4.5"
146 5.8"
100 3.9"
NAVpilot-700 Control Unit (Bracket-mount)
FAP-7001
0.9 kg 1.9 lb
Furuno's new NAVpilot series is designed to match the NavNet
TZtouch, NavNet 3D, FI-50 Instrument series and other navigation
equipment. The “Plug and Play” CAN bus interface allows for easy
installation and exceptional interface ability.
The diagrams below show typical installations for power and sail boats.
What is CAN bus?
CAN bus is a communication protocol that shares multiple
data and signals through a single backbone cable. You can
simply connect any CAN bus devices onto the backbone
cable to expand your network onboard. With CAN bus,
IDs are assigned to all the devices, and status of each
sensor in the network can be detected. All the CAN bus
devices can be incorporated into the NMEA2000 network.
115 4.5"
19
0.7" 40
1.6"
14
0.6"
115 4.5"
Cut-out for ush mount
(Wall thickness less than 10 mm)
90
Cut-out for ush mount
(Wall thickness 10 to 20 mm)
95
Visit our website to watch guided videos, see
screenshots and learn more about features of
NAVpilot-700 series.
http://www.furuno.com/special/en/navpilot/
NEW!
Color
LCD
SAIL BOAT
POWER BOAT
Multi Function Display
NavNet TZtouch
NAVpilot-700
NAVpilot-711C
Instruments
FI-504
Instruments
FI-501
Processor unit
FAP-7002
Heading sensor
PG-700
Instruments
FI-503
NAVpilot-711C
NAVpilot-700
Instruments
FI-503
Instruments
FI-501
Junction Box
FI-5002
Wind Transducer
FI-5001L
Processor unit
FAP-7002
Hydraulic pump
Heading sensor
PG-700
Junction Box
FI-5002
Multi Function Display
NavNet TZtouch
Multi Function Display
NavNet TZtouch
NAVpilot-711C
Junction Box
FI-5002
Heading sensor
PG-700
Processor unit
FAP-7002
Hydraulic pump

▲
Furuno Fantum Feedback - allows for no physical
rudder feedback unit for a streamlined installation and
precise course control
▲
Optional revolutionary SAFE HELM and POWER ASSIST
brings unrivaled steering control and comfort at the helm*
▲
Selectable "Economy" and "Precision" Navigation
Modes combine adaptive technology providing fuel
and power savings of up to 2.5% or more.**
▲
Volvo Penta IPS compatibility
▲
"Precision" XTE accuracy: within 0.003 nm
▲
Perfect for inboard or outboard power boats and
sail boats
▲
Simple one-touch mode selection enables exible
steering and course control
▲
Autopilot control available from NavNet TZtouch
Single-Din size
4.1” Color LCD
Double-Din size 4.6” Mono LCD
3.6” Mono LCD
Handheld Display
(Option)
R
Wind
(True or apparent)
R
Wind
(True or apparent)
Tide and Wind Tide and Wind
Tide and WindTide and Wind Tide and Wind
Waypoint
Tide and Wind
Kick back, relax and let NAVpilot
steer you to your destination!
FURUNO NAVpilot is a revolutionary autopilot with a sunlight
viewable display designed for a variety of vessels.
It utilizes a self-learning and adaptive software algorithm, and
plays the ultimate role in course keeping capability, dynamically
adjusting essential parameters for navigation i.e., vessel speed,
trim, draught, tide and wind effects, dead band, weather, etc.
These parameters are stored in the system memory and
continuously optimized.
FishHunter
The NAVpilot will activate the FishHunter to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the
specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).
NAVpilot consistently maintains the desired heading, but the
vessel may drift off course due to the effects of tide and wind.
NAVpilot consistently maintains the desired heading while
compensating for the effects of tide and wind.
NAVpilot consistently maintains the desired heading toward true or apparent wind
direction while compensating for the effects of tide and wind.
NAVpilot steers the vessel towards the current waypoint while
compensating for the effects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the vessel
to follow a series of waypoints in succession.
Upon arriving at each waypoint or destination, audible and visual alerts are activated.
Wind mode*
Self-learning and adaptive software
Fantum Feedback
IPS Compatibility
Safe Helm
Power Assist
From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics.
This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc.
These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more versatile.
Tide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Auto mode
Advanced mode
NAV mode / Route tracking
Various display modes are available, allowing you to
customize the data to suit your own preferences with
either digital or analog graphics.
The new NAVpilot-711C features a color day/night
graphic display, giving you much better sunlight
viewability during the day, while not affecting your night
vision when the sun goes down.
L
Waypoint
Waypoint
Waypoint
Orbit Figure 8 Spiral
Waypoint Waypoint
Square Zigzag
Waypoint Waypoint
NAVpilot’s remarkable self-learning, adaptive software is
developed by collaborative works between FURUNO and FLSI.
The optional SAFE HELM and POWER ASSIST features*provide a unique interface to the vessel's hydraulic
hand steering system, providing unrivaled comfort and control of the vessel's steering directly from any manual
helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your vessel's
autopilot. * Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and
possibly replace separate electric and power-robbing, engine-driven power steering systems on
many vessels. POWER ASSIST reduces steering system complexity and costs while increasing
economy.
POWER ASSIST
The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time
interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has
elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
SAFE HELM
* Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
** Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S.
Department of Energy (www.ornl.gov/sci/eere/cef)
* This mode is available for sailing craft only. Wind data input is required.
Furuno Fantum Feedback
SAFE HELM / POWER ASSIST
Bright & Clear Display
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Display modes for NAVpilot-700
Rudder Angle Wind
for
NIGHT time
vision - black
for
DAY time
vision - white
Display modes for NAVpilot-711C
Auto mode
Turn mode Wind
Highway
New
L
L
Color LC DNew

▲
Furuno Fantum Feedback - allows for no physical
rudder feedback unit for a streamlined installation and
precise course control
▲
Optional revolutionary SAFE HELM and POWER ASSIST
brings unrivaled steering control and comfort at the helm*
▲
Selectable "Economy" and "Precision" Navigation
Modes combine adaptive technology providing fuel
and power savings of up to 2.5% or more.**
▲
Volvo Penta IPS compatibility
▲
"Precision" XTE accuracy: within 0.003 nm
▲
Perfect for inboard or outboard power boats and
sail boats
▲
Simple one-touch mode selection enables exible
steering and course control
▲
Autopilot control available from NavNet TZtouch
Single-Din size
4.1” Color LCD
Double-Din size 4.6” Mono LCD
3.6” Mono LCD
Handheld Display
(Option)
R
Wind
(True or apparent)
R
Wind
(True or apparent)
Tide and Wind Tide and Wind
Tide and WindTide and Wind Tide and Wind
Waypoint
Tide and Wind
Kick back, relax and let NAVpilot
steer you to your destination!
FURUNO NAVpilot is a revolutionary autopilot with a sunlight
viewable display designed for a variety of vessels.
It utilizes a self-learning and adaptive software algorithm, and
plays the ultimate role in course keeping capability, dynamically
adjusting essential parameters for navigation i.e., vessel speed,
trim, draught, tide and wind effects, dead band, weather, etc.
These parameters are stored in the system memory and
continuously optimized.
FishHunter
The NAVpilot will activate the FishHunter to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the
specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).
NAVpilot consistently maintains the desired heading, but the
vessel may drift off course due to the effects of tide and wind.
NAVpilot consistently maintains the desired heading while
compensating for the effects of tide and wind.
NAVpilot consistently maintains the desired heading toward true or apparent wind
direction while compensating for the effects of tide and wind.
NAVpilot steers the vessel towards the current waypoint while
compensating for the effects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the vessel
to follow a series of waypoints in succession.
Upon arriving at each waypoint or destination, audible and visual alerts are activated.
Wind mode*
Self-learning and adaptive software
Fantum Feedback
IPS Compatibility
Safe Helm
Power Assist
From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics.
This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc.
These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more versatile.
Tide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Auto mode
Advanced mode
NAV mode / Route tracking
Various display modes are available, allowing you to
customize the data to suit your own preferences with
either digital or analog graphics.
The new NAVpilot-711C features a color day/night
graphic display, giving you much better sunlight
viewability during the day, while not affecting your night
vision when the sun goes down.
L
Waypoint
Waypoint
Waypoint
Orbit Figure 8 Spiral
Waypoint Waypoint
Square Zigzag
Waypoint Waypoint
NAVpilot’s remarkable self-learning, adaptive software is
developed by collaborative works between FURUNO and FLSI.
The optional SAFE HELM and POWER ASSIST features*provide a unique interface to the vessel's hydraulic
hand steering system, providing unrivaled comfort and control of the vessel's steering directly from any manual
helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your vessel's
autopilot. * Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and
possibly replace separate electric and power-robbing, engine-driven power steering systems on
many vessels. POWER ASSIST reduces steering system complexity and costs while increasing
economy.
POWER ASSIST
The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time
interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has
elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
SAFE HELM
* Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
** Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S.
Department of Energy (www.ornl.gov/sci/eere/cef)
* This mode is available for sailing craft only. Wind data input is required.
Furuno Fantum Feedback
SAFE HELM / POWER ASSIST
Bright & Clear Display
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Display modes for NAVpilot-700
Rudder Angle Wind
for
NIGHT time
vision - black
for
DAY time
vision - white
Display modes for NAVpilot-711C
Auto mode
Turn mode Wind
Highway
New
L
L
Color LC DNew

▲
Furuno Fantum Feedback - allows for no physical
rudder feedback unit for a streamlined installation and
precise course control
▲
Optional revolutionary SAFE HELM and POWER ASSIST
brings unrivaled steering control and comfort at the helm*
▲
Selectable "Economy" and "Precision" Navigation
Modes combine adaptive technology providing fuel
and power savings of up to 2.5% or more.**
▲
Volvo Penta IPS compatibility
▲
"Precision" XTE accuracy: within 0.003 nm
▲
Perfect for inboard or outboard power boats and
sail boats
▲
Simple one-touch mode selection enables exible
steering and course control
▲
Autopilot control available from NavNet TZtouch
Single-Din size
4.1” Color LCD
Double-Din size 4.6” Mono LCD
3.6” Mono LCD
Handheld Display
(Option)
R
Wind
(True or apparent)
R
Wind
(True or apparent)
Tide and Wind Tide and Wind
Tide and WindTide and Wind Tide and Wind
Waypoint
Tide and Wind
Kick back, relax and let NAVpilot
steer you to your destination!
FURUNO NAVpilot is a revolutionary autopilot with a sunlight
viewable display designed for a variety of vessels.
It utilizes a self-learning and adaptive software algorithm, and
plays the ultimate role in course keeping capability, dynamically
adjusting essential parameters for navigation i.e., vessel speed,
trim, draught, tide and wind effects, dead band, weather, etc.
These parameters are stored in the system memory and
continuously optimized.
FishHunter
The NAVpilot will activate the FishHunter to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the
specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).
NAVpilot consistently maintains the desired heading, but the
vessel may drift off course due to the effects of tide and wind.
NAVpilot consistently maintains the desired heading while
compensating for the effects of tide and wind.
NAVpilot consistently maintains the desired heading toward true or apparent wind
direction while compensating for the effects of tide and wind.
NAVpilot steers the vessel towards the current waypoint while
compensating for the effects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the vessel
to follow a series of waypoints in succession.
Upon arriving at each waypoint or destination, audible and visual alerts are activated.
Wind mode*
Self-learning and adaptive software
Fantum Feedback
IPS Compatibility
Safe Helm
Power Assist
From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics.
This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc.
These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more versatile.
Tide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Auto mode
Advanced mode
NAV mode / Route tracking
Various display modes are available, allowing you to
customize the data to suit your own preferences with
either digital or analog graphics.
The new NAVpilot-711C features a color day/night
graphic display, giving you much better sunlight
viewability during the day, while not affecting your night
vision when the sun goes down.
L
Waypoint
Waypoint
Waypoint
Orbit Figure 8 Spiral
Waypoint Waypoint
Square Zigzag
Waypoint Waypoint
NAVpilot’s remarkable self-learning, adaptive software is
developed by collaborative works between FURUNO and FLSI.
The optional SAFE HELM and POWER ASSIST features*provide a unique interface to the vessel's hydraulic
hand steering system, providing unrivaled comfort and control of the vessel's steering directly from any manual
helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your vessel's
autopilot. * Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and
possibly replace separate electric and power-robbing, engine-driven power steering systems on
many vessels. POWER ASSIST reduces steering system complexity and costs while increasing
economy.
POWER ASSIST
The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time
interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has
elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
SAFE HELM
* Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
** Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S.
Department of Energy (www.ornl.gov/sci/eere/cef)
* This mode is available for sailing craft only. Wind data input is required.
Furuno Fantum Feedback
SAFE HELM / POWER ASSIST
Bright & Clear Display
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Display modes for NAVpilot-700
Rudder Angle Wind
for
NIGHT time
vision - black
for
DAY time
vision - white
Display modes for NAVpilot-711C
Auto mode
Turn mode Wind
Highway
New
L
L
Color LC DNew

▲
Furuno Fantum Feedback - allows for no physical
rudder feedback unit for a streamlined installation and
precise course control
▲
Optional revolutionary SAFE HELM and POWER ASSIST
brings unrivaled steering control and comfort at the helm*
▲
Selectable "Economy" and "Precision" Navigation
Modes combine adaptive technology providing fuel
and power savings of up to 2.5% or more.**
▲
Volvo Penta IPS compatibility
▲
"Precision" XTE accuracy: within 0.003 nm
▲
Perfect for inboard or outboard power boats and
sail boats
▲
Simple one-touch mode selection enables exible
steering and course control
▲
Autopilot control available from NavNet TZtouch
Single-Din size
4.1” Color LCD
Double-Din size 4.6” Mono LCD
3.6” Mono LCD
Handheld Display
(Option)
R
Wind
(True or apparent)
R
Wind
(True or apparent)
Tide and Wind Tide and Wind
Tide and WindTide and Wind Tide and Wind
Waypoint
Tide and Wind
Kick back, relax and let NAVpilot
steer you to your destination!
FURUNO NAVpilot is a revolutionary autopilot with a sunlight
viewable display designed for a variety of vessels.
It utilizes a self-learning and adaptive software algorithm, and
plays the ultimate role in course keeping capability, dynamically
adjusting essential parameters for navigation i.e., vessel speed,
trim, draught, tide and wind effects, dead band, weather, etc.
These parameters are stored in the system memory and
continuously optimized.
FishHunter
The NAVpilot will activate the FishHunter to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the
specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).
NAVpilot consistently maintains the desired heading, but the
vessel may drift off course due to the effects of tide and wind.
NAVpilot consistently maintains the desired heading while
compensating for the effects of tide and wind.
NAVpilot consistently maintains the desired heading toward true or apparent wind
direction while compensating for the effects of tide and wind.
NAVpilot steers the vessel towards the current waypoint while
compensating for the effects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the vessel
to follow a series of waypoints in succession.
Upon arriving at each waypoint or destination, audible and visual alerts are activated.
Wind mode*
Self-learning and adaptive software
Fantum Feedback
IPS Compatibility
Safe Helm
Power Assist
From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics.
This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc.
These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more versatile.
Tide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Auto mode
Advanced mode
NAV mode / Route tracking
Various display modes are available, allowing you to
customize the data to suit your own preferences with
either digital or analog graphics.
The new NAVpilot-711C features a color day/night
graphic display, giving you much better sunlight
viewability during the day, while not affecting your night
vision when the sun goes down.
L
Waypoint
Waypoint
Waypoint
Orbit Figure 8 Spiral
Waypoint Waypoint
Square Zigzag
Waypoint Waypoint
NAVpilot’s remarkable self-learning, adaptive software is
developed by collaborative works between FURUNO and FLSI.
The optional SAFE HELM and POWER ASSIST features*provide a unique interface to the vessel's hydraulic
hand steering system, providing unrivaled comfort and control of the vessel's steering directly from any manual
helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your vessel's
autopilot. * Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and
possibly replace separate electric and power-robbing, engine-driven power steering systems on
many vessels. POWER ASSIST reduces steering system complexity and costs while increasing
economy.
POWER ASSIST
The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time
interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has
elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
SAFE HELM
* Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
** Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S.
Department of Energy (www.ornl.gov/sci/eere/cef)
* This mode is available for sailing craft only. Wind data input is required.
Furuno Fantum Feedback
SAFE HELM / POWER ASSIST
Bright & Clear Display
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a
simplied installation, while also delivering enhanced steering control. With
Fantum Feedback, NAVpilot outboard installations no longer require use of a
physical rudder feedback unit.
Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700
series software. This new software was developed and extensively tested on a
wide variety of outboard vessels with hydraulic steering and reversing pump
control. Fantum Feedback achieves precise course control, from slow trolling
speeds to high-speed cruising, utilizing a newly developed gain process, rather
than traditional rudder angle based control.
Display modes for NAVpilot-700
Rudder Angle Wind
for
NIGHT time
vision - black
for
DAY time
vision - white
Display modes for NAVpilot-711C
Auto mode
Turn mode Wind
Highway
New
L
L
Color LC DNew
85 3.3"
115 4.5"
Fixing hole
220 8.7"
206 8.0"
40 1.6"
26 1.0"
41 1.6"
#40 1.6" #40
1.6"
100 3.9"
Cut-out for ush mount
206 8.1"
85 3.3"
48
1.9"
4- 3.2
89
90
216 8.5"
#40 #40
100 3.9"
Cut-out for ush mount
228 9.0"
113 4.4"
60 2.4"
4-R5
218 8.6"
111 4.4"
24 0.9"
10 0.4"
58 2.3"
#40 1.6" #40 1.6"
89
Fixing hole
239 9.4"
228 9.0"
60 2.4"
125 4.9"
4- 3.2
13105SS Printed in Japan
Catalogue No. M-1551d
All brand and product names are registered trademarks, trademarks
or service marks of their respective holders.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.furuno.com
SPECIFICATIONS
NAVpilot-700 Control Unit (Surface-mount)
0.62 kg 1.4 lb
NAVpilot-700 Control Unit (Flush-mount)
0.64 kg 1.4 lb
NAVpilot-711C Control Unit (Surface-mount only)
0.33 kg 0.7 lb
CONTROL UNIT
PROCESSOR UNIT
Heading deviation, Cross-track error*, Ship's speed*, Depth*, Water temperature*, Wind*, Watch, Log trip*, * external data required
INTERFACE
CAN bus: 1, NMEA0183: 2
ENVIRONMENT
POWER SUPPLY
Display
Effective Display Area
Pixel Number
Backlight
Contrast
Rudder Angle Adjustment
Sea Condition Adjustment
Rudder Angle Settings
Alarm
Ports
Input
Output
Temperature
Waterproong Processor unit
Other unit
STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*, Wind*, Fish HunterTM** external data required
85.2 (W) x 85.2 (H) mm
160 x 160 dots
16 steps
82.6 (W) x 61.9 (H) mm
320 x 240 dots
-
8 steps
4.1” Color LCD4.6” Monochrome LCD
AUTO/MANUAL-CALM/MODERATE/ROUGH
10 - 45 deg
EQUIPMENT LIST
Standard
Options
(NMEA0183) AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW, VTG,
VWR, VWT, XTE, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/464/720/992/996, 127250/251/258/488/489, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/313/314/577/880
(NMEA0183) DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB, RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/464/720/992/996, 127237, 245/250/251/258, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/822/823
-15˚C to +55˚C
IP20
IP56
12-24 VDC: 4.0 - 2.0 A (excluding pump)
Control Unit (FAP-7001 or 7011C), Processor Unit FAP-7002, Installation Materials and Spare Parts
Control Units, Flush Mount Kits, Bracket-mount Kits, Cradle, Rudder Reference Units FAP6112-200,
Remote Controllers, Cables, Connectors, Junction Box, Pump Unit, FPS8 Power Steering Module, Volvo Interface Kit FAP-6300
NAVpilot cable
CAN bus
Others
255 10.0"
90 3.5"
259 10.2"
219 8.6"
Processor Unit FAP-7002
1.9 kg 4.2 lb
260 10.2"
220 8.7"
127 5"
115 4.5"
146 5.8"
100 3.9"
NAVpilot-700 Control Unit (Bracket-mount)
FAP-7001
0.9 kg 1.9 lb
Furuno's new NAVpilot series is designed to match the NavNet
TZtouch, NavNet 3D, FI-50 Instrument series and other navigation
equipment. The “Plug and Play” CAN bus interface allows for easy
installation and exceptional interface ability.
The diagrams below show typical installations for power and sail boats.
What is CAN bus?
CAN bus is a communication protocol that shares multiple
data and signals through a single backbone cable. You can
simply connect any CAN bus devices onto the backbone
cable to expand your network onboard. With CAN bus,
IDs are assigned to all the devices, and status of each
sensor in the network can be detected. All the CAN bus
devices can be incorporated into the NMEA2000 network.
115 4.5"
19
0.7" 40
1.6"
14
0.6"
115 4.5"
Cut-out for ush mount
(Wall thickness less than 10 mm)
90
Cut-out for ush mount
(Wall thickness 10 to 20 mm)
95
Visit our website to watch guided videos, see
screenshots and learn more about features of
NAVpilot-700 series.
http://www.furuno.com/special/en/navpilot/
NEW!
Color
LCD
SAIL BOAT
POWER BOAT
Multi Function Display
NavNet TZtouch
NAVpilot-700
NAVpilot-711C
Instruments
FI-504
Instruments
FI-501
Processor unit
FAP-7002
Heading sensor
PG-700
Instruments
FI-503
NAVpilot-711C
NAVpilot-700
Instruments
FI-503
Instruments
FI-501
Junction Box
FI-5002
Wind Transducer
FI-5001L
Processor unit
FAP-7002
Hydraulic pump
Heading sensor
PG-700
Junction Box
FI-5002
Multi Function Display
NavNet TZtouch
Multi Function Display
NavNet TZtouch
NAVpilot-711C
Junction Box
FI-5002
Heading sensor
PG-700
Processor unit
FAP-7002
Hydraulic pump

85 3.3"
115 4.5"
Fixing hole
220 8.7"
206 8.0"
40 1.6"
26 1.0"
41 1.6"
#40 1.6" #40
1.6"
100 3.9"
Cut-out for ush mount
206 8.1"
85 3.3"
48
1.9"
4- 3.2
89
90
216 8.5"
#40 #40
100 3.9"
Cut-out for ush mount
228 9.0"
113 4.4"
60 2.4"
4-R5
218 8.6"
111 4.4"
24 0.9"
10 0.4"
58 2.3"
#40 1.6" #40 1.6"
89
Fixing hole
239 9.4"
228 9.0"
60 2.4"
125 4.9"
4- 3.2
1402PDF Printed in Japan
Catalogue No. M-1551e
All brand and product names are registered trademarks, trademarks
or service marks of their respective holders.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.furuno.com
SPECIFICATIONS
NAVpilot-700 Control Unit (Surface-mount)
0.62 kg 1.4 lb
NAVpilot-700 Control Unit (Flush-mount)
0.64 kg 1.4 lb
NAVpilot-711C Control Unit (Surface-mount only)
0.33 kg 0.7 lb
CONTROL UNIT
PROCESSOR UNIT
Heading deviation, Cross-track error*, Ship's speed*, Depth*, Water temperature*, Wind*, Watch, Log trip*, * external data required
INTERFACE
CAN bus (NMEA2000) : 1, NMEA0183: 2
ENVIRONMENT
POWER SUPPLY
Display
Effective Display Area
Pixel Number
Backlight
Contrast
Rudder Angle Adjustment
Sea Condition Adjustment
Rudder Angle Settings
Alarm
Ports
Input
Output
Temperature
Waterproong Processor unit
Other unit
STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*, Wind*, Fish HunterTM** external data required
85.2 (W) x 85.2 (H) mm
160 x 160 dots
16 steps
82.6 (W) x 61.9 (H) mm
320 x 240 dots
-
8 steps
4.1” Color LCD4.6” Monochrome LCD
AUTO/MANUAL-CALM/MODERATE/ROUGH
10 - 45 deg
EQUIPMENT LIST
Standard
Options
(NMEA0183) AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW, VTG,
VWR, VWT, XTE, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/720/992/996, 127250/251/258/488/489, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/313/314/577/818/821/827/880
(NMEA0183) DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB, RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
(CAN bus) 059392/904, 060928, 061184, 126208/464/720/992/996, 127237, 245/250/251/258, 128259/267, 129025/026/029/033/283/284/285,
130306/310/311/312/822/823
-15˚C to +55˚C
IP20
IP56
12-24 VDC: 4.0 - 2.0 A (excluding pump)
Control Unit (FAP-7001 or 7011C), Processor Unit FAP-7002, Installation Materials and Spare Parts
Control Units, Flush Mount Kits, Bracket-mount Kits, Cradle, Rudder Reference Units FAP6112-200,
Remote Controllers, Cables, Connectors, Junction Box, Pump Unit, FPS8 Power Steering Module, Volvo Interface Kit FAP-6300
NAVpilot cable
CAN bus
Others
255 10.0"
90 3.5"
259 10.2"
219 8.6"
Processor Unit FAP-7002
1.9 kg 4.2 lb
260 10.2"
220 8.7"
127 5"
115 4.5"
146 5.8"
100 3.9"
NAVpilot-700 Control Unit (Bracket-mount)
FAP-7001
0.9 kg 1.9 lb
Furuno's new NAVpilot series is designed to match the NavNet
TZtouch, NavNet 3D, FI-50 Instrument series and other navigation
equipment. The “Plug and Play” CAN bus interface allows for easy
installation and exceptional interface ability.
The diagrams below show typical installations for power and sail boats.
What is CAN bus?
CAN bus is a communication protocol that shares multiple
data and signals through a single backbone cable. You can
simply connect any CAN bus devices onto the backbone
cable to expand your network onboard. With CAN bus,
IDs are assigned to all the devices, and status of each
sensor in the network can be detected. All the CAN bus
devices can be incorporated into the NMEA2000 network.
115 4.5"
19
0.7" 40
1.6"
14
0.6"
115 4.5"
Cut-out for ush mount
(Wall thickness less than 10 mm)
90
Cut-out for ush mount
(Wall thickness 10 to 20 mm)
95
Visit our website to watch guided videos, see
screenshots and learn more about features of
NAVpilot-700 series.
http://www.furuno.com/special/en/navpilot/
NEW!
Color
LCD
FURUNO ELECTRIC CO., LTD.
Nishinomiya, Hyogo, Japan
www.furuno.com
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
www.furunousa.com
FURUNO (UK)LIMITED
Havant, Hampshire, U.K.
www.furuno.co.uk
FURUNO FRANCE S.A.S.
Bordeaux-Mérignac, France
www.furuno.fr
FURUNO ITALIA S.R.L.
Gatteo Mare, Italy
FURUNO ESPAÑA S.A.
Madrid, Spain
www.furuno.es
FURUNO DANMARK A/S
Hvidovre, Denmark
www.furuno.dk
FURUNO NORGE A/S
Ålesund, Norway
www.furuno.no
FURUNO SVERIGE AB
Västra Frölunda, Sweden
www.furuno.se
FURUNO FINLAND OY
Espoo, Finland
www.furuno.
FURUNO POLSKA Sp. Z o.o.
Gdynia, Poland
www.furuno.pl
FURUNO EURUS LLC
St. Petersburg, Russian Federation
www.furuno.com.ru
RICO (PTE)LTD
Singapore
www.rico.com.sg
FURUNO DEUTSCHLAND GmbH
Rellingen, Germany
www.furuno.de
FURUNO HELLAS S.A.
Piraeus, Greece
www.furuno.gr
FURUNO (CYPRUS) LTD
Limassol, Cyprus
www.furuno.com.cy
FURUNO SHANGHAI CO., LTD.
Shanghai, China
www.furuno.com/cn
SAIL BOAT
POWER BOAT
Multi Function Display
NavNet TZtouch
NAVpilot-700
NAVpilot-711C
Instruments
FI-504
Instruments
FI-501
Processor unit
FAP-7002
Heading sensor
PG-700
Instruments
FI-503
NAVpilot-711C
NAVpilot-700
Instruments
FI-503
Instruments
FI-501
Junction Box
FI-5002
Wind Transducer
FI-5001L
Processor unit
FAP-7002
Hydraulic pump
Heading sensor
PG-700
Junction Box
FI-5002
Multi Function Display
NavNet TZtouch
Multi Function Display
NavNet TZtouch
NAVpilot-711C
Junction Box
FI-5002
Heading sensor
PG-700
Processor unit
FAP-7002
Hydraulic pump