Specifications
TV-M160DVD TV-M190DVD TV-M220DVD
Screen size, visible 16” Wide Screen TFT LCD 19” Wide Screen TFT LCD 22” Wide Screen TFT LCD
Screen Format 16:9 16:9 16:9
Resolution 1366 x 768 Pixel 1366 x 768 Pixel 1366 x 768 Pixel
Max. contrast ratio 500:1 1000:1 1000:1
Brightness (Typical) 250 cd/m2 250 cd/m2 300 cd/m2
Response Time (Typical) 8ms 5ms 5ms
Display Colours 16.7M 16.7M 16.7M
Viewing Angle (Typical) H:90˚, V:65˚ H:170˚, V:160˚ H:170˚, V:160˚
Power Supply 110-240V AC, 12V DC 5 metre cable 110-240V AC, 12V DC 5 metre cable 110-240V AC, 12V DC 5 metre cable
Power Consumption 30W 48W 52W
Standby Power Dissipation ≤1W ≤1W ≤1W
Colour System PAL PAL PAL
Sound System BG/DK/I BG/DK/I BG/DK/I
AV Playback PAL/SECAM/NTSC PAL/SECAM/NTSC PAL/SECAM/NTSC
Troubleshooting
PROBLEM SOLUTION
No picture or sound Check the power supply is plugged in and turned on.
Picture is OK but no sound Make sure the volume is not set to minimum or mute. Turn offthe TV and turn back on.
Remote control doesn’t work Check the battery connection is correct. Check the batteries. Make sure no obstacles are between the sensor of the remote and TV
No TV Signal Check the source is set to ATV or DTV. Check the antenna signal status.
No external video signal Check the source is set to AV
Picture lacks colour or is to dark Check colour, brightness and contrast settings
All channels lose colour intermittently Check the antenna in case it is broken, disconnected or damaged.
Poor reception, loss of colour Check channel is tuned correctly
Diagonal stripes on picture Receiver may be affected by interference. e.g. nearby radio broadcasting transmitter or from another TV receiver.
Ghost images appear Antenna direction may have been changed by a storm or strong wind. Ghost images are caused from both the signal travelling
directly from the transmitter and a signal reflected from a hill or large building. Direction of the antenna should be chosen to avoid
this situation.
USB media files don’t work FAT 32 formatted flash drive required. Reformat if required.
Time Shift and PVR don’t work FAT 32 formatted flash drive required. Reformat if required.
All Models Feature:
» Conformal coated PCB
» Built-in DVD/CD drive
» Built in DVB-T digital tuner
» HDMI input for true digital connection
» USB connection for digital media playback
» PVR functionality (record digital TV)**
» Component and Composite video inputs
» VGA port for connection to a PC
» S-Video
» Multi-language On-screen display
» Closed Caption Decoder
» Parental Lock
» Sleep Timer
» Built in speakers (4W x 2)
» Wall mounting bracket included
013
Important Safety Instructions
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the unit
is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future
reference.
3. HEED WARNINGS - All warnings on the unit and in the operating instructions should be adhered
to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS - The manufacturer of this unit does not make any recommendations for
attachments, as they may cause hazards.
7. WATER AND MOISTURE - Do not use this unit near water. For example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES - Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The
unit may fall, causing serious injury, and serious damage to the unit. An appliance and cart
combination should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
PORTABLE CART WARNING
S3126A
9. VENTILATION - Slots and openings in the cabinet back or bottom are provided for ventilation, to
ensure reliable operation of the unit and to protect it from overheating. These openings should
never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat source. This unit should not be placed in a built-in
installation, such as a bookcase, or rack unless proper ventilation is provided or the manufacture’s
instructions have been adhered to.
10. POWER SOURCE - This unit should be operated only from the type of power source indicated
on the rating plate. If you are not sure of the type of power supply to your home, consult your
appliance dealer or local power company. For units intended to operate from battery power, or
other sources, refer to the operating instructions.
11. POLARIZATION - This unit is equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13. LIGHTNING - To protect your unit during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the unit due to lightning and power line surges.
14. POWER LINES - An outside antenna system should not be located in the vicinity of overhead
power lines, or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of
fire or electric shock.
16. OBJECT AND LIQUID ENTRY - Do not push objects through any openings in this unit as they may
touch dangerous voltage points or short out parts that could result in fire or electric shock.
Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the unit,
be sure the antenna or cable system is grounded to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
18. SERVICING - Do not attempt to service this unit yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
19 .DAMAGE REQUIRING SERVICE - Unplug this unit from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the unit to Its normal operation.
E. If the unit has been dropped or the cabinet has been damaged.
F. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or those that have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK - Upon completion of any service or repairs to this unit, ask the service
technician to perform safety checks to determine that the unit is in proper operating condition.
22. HEAT - The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
23. NOTE TO CATV SYSTEM INSTALLER - This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, In
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Double insulation this is class II apparatus.
The mains plug used as the disconnect device. The disconnect device shall remain readily operable.
WARNING: To reduce the risk of electric shock do not expose this apparatus to rain or moisture
and objects filled with liquids, such as vases, should not be placed on this apparatus.
WARNING: According to the industrial standards, there are a certain number of defective pixels
both bright and dark that are acceptable. Although we produce panel with more than 99.99
percent active cells, there still may be some cells that do not produce light or remain lit. For more
information, please contact sales or the technical support.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the “TV” mode.
If using CATV, set the menu option to “CATV” (Cable Television)
WARNING: Do not leave any stationary images, patterns, PIP box, or letterbox images on the screen
for an extended period of time. Also, do not display the same stationary patterns frequently. This
may result in permanent ghost images on the display unit. This type of damage is not covered
under warranty. Examples of this type of situation can be but not limited to the following: side
bar images, stock market report bars, video game patterns, closed captioning, shopping channel
logo, price display, and letterbox black bars. To prevent this type of damage, display constant
moving images that fill the screen as often as possible.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the use’s authority to operate this equipment.
