Future Automation FM-BSQ User manual

FM-BSQ
www.futureautomation.co.uk
FLAT SCREEN TV STAND WITH SQUARE BASE
INSTALLATION GUIDE & PARTS LIST
PLEA SE KEEP THIS FOR FUTURE REFERENCE
This Pack Contains 1 Mount
FEATURES
P A R TS LIST
FUTURE AUTOMATION
Unit 4 The Orbital Centre, Cockerell Close, Gunnels Wood Road, Stevenage
Hertfordshire, SG1 2NB, United Kingdom
Email: [email protected]
Only use
if necessary
•Designed for LCD, LED and Plasma TVs
up to 50" (127cm) / 30kg (66lbs)
•Fits screens with VESA® and non-VESA®
mounting patterns up to 600 x 400mm
•Easy swivel adjustment 60°
•
•Concealed castors and cable management
•Includes Accessory Shelf - Max weight: 10kg (22lbs)
•Glass Shelf Thickness: 5mm
•Dimensions: W: 500mm (19.7") D: 500mm (19.7")
H: 975mm (38.3") (to centre of mount)
•Tempered glass base and shelf toughened
to meet BS6206A standard

Do not attempt to install this product until all instructions and warnings have been read and properly
understood. Please keep these instructions for future reference.
Future Automation ,its distributors and dealers are not liable or responsible for damage or injury
caused by improper installation, improper use or failure to observe these safety instructions. In such cases,
all guarantees will expire.
General
Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly
heavy and easily damaged if dropped.
If you do not fully understand the instructions or are not sure how to install this product safely, then please
consult a professional for advice and/or to install this product for you. Failure to mount this product correctly
may cause serious injury or death both during installation and at any time thereafter. Do not mount any AV
This weight limit will be
clearly stated on each product and its packaging and will vary from product to product.
Product location
Please pay careful attention to where this product is located. Some locations are not suitable for installation.
If located in a public or frequently populated area ensure that the product is out of the immediate reach of
people.
Fixing hardware
professional or your local hardware store.
Hazard limitation
When routing cables take advantage of any built in cable management features that the product might
provide and ensure that all cables are tidy and secure. Check to see that any moving aspect of the product
can do so unhindered by any cabling.
Some products have moving parts and the potential to cause injury through the crushing or trapping of
Particular attention to the nature of moving parts is required especially when assembling installing and
adjusting during set up.
Immediately after installations double-check that the work done is safe and secure. Double-check all
possible to ensure that safety is maintained. If in doubt consult a professional AV installer or other suitably
INSTALLATION SAFETY INSTRUCTIONS
CAUTION: This stand is intended for use
screens heavier than the maximum indicated may result in
instability causing possible injury.