FWB MultiBall Pro User manual

MultiBall Pro - Setup Guide 3.2
Fun With Balls GmbH

Technical Specications MultiBall Pro
What's In The Box
Console
Sensor Frame
AC Power Cord
Installation Guide
Dimensions (WxHxD)
489 x 335 x 14 cm
Connectivity
Power: 110V / 220V / 230V
Internet: Ethernet / USB (Mobile Hotspot)
Video: HDMI (use quality cables)
Audio
Internal Sound System

Technical Specications MultiBall Club
The System needs a Projector, that is mounted as close and high as possible to avoid shadows.
•Use a high quality HDMI cable.
Recommended Projectors:
•Panasonic PT-VMZ40
•Panasonic PT-VMZ60
•Panasonic PT-VZ470
Required Resolution:
•WUXGA (1920x1200)
•WXGA (1280x800)
Required Aspect Ratio
•16:10
Use this site to accurately calculate the distance you need for lens and projector:
hps://panasonic.net/cns/projector/calculator/tdc/index.html
Please ask a local projector dealer to help you choose the right projector for your light conditions and the projector distance.
Recommended play area:
5,8m x 5,8m

Dimensions in mm
138 mm1599 mm
4890 mm
3090 mm
3347 mm

Hardware
Holder (x9) Sensor (x12) Cover (x8) Sensor Bolt M4 (x40) Cover Bolt M6 (x32)
Console

Cable Management
There are 7 cable outlets to run the HDMI, LAN and power cable.
138 mm1599 mm
4890 mm
3090 mm
3347 mm

Recommended Equipment
Ladder Laser Level DrillAllen Key Set
There are 52 holes
with a diameter of 8mm.
Screws and Dowels
for Wall Mounting

Step 1
Open Console
Remove the 6 screws and liup the cover.

LeSide Down (2)
Right Side Down (2)
Boom Right (1)
Boom Le(1)
Top Le(4) Top Right (4)
Console (5)
Right Side Up (2)
LeSide Up (2)
Step 2
Mount Holders and Console
1. Mount the Boom Holders
Le, Middle and Right touching
each other.
(Distance to oor 20mm)
2. Mount LeSide and Right Side.
3. Verify Leand Right are fully
leveled and parallel.
4. Mount Top Leand Top Right.
5. Mount Console (next page).
Please always make sure all proles are leveled in order to
make the top Frames touch each other with no gap.
Please select the suitable bolts, dowels and washers to aach the
frame to the wall according to wall properties (3-5 screws per part).
Boom Middle (1)

Secure the Console with 7 bolts.
Step 2
Mount Console