Gaggenau BM454 IN Series User manual

en User manual and installation instructions
BM454...IN
BM455...IN
Microwave Oven
Gaggenau

en Safety
2
Table of contents
INFORMATION FOR USE
1 Safety...................................................................2
2 Preventing material damage ..............................5
3 Environmental protection and saving en-
ergy ......................................................................6
4 Familiarising yourself with your appliance .......7
5 Accessories.........................................................9
6 Before using for the first time ..........................10
7 Basic operation .................................................10
8 Microwave .........................................................11
9 Oven...................................................................12
10 Grill ....................................................................13
11 MicroCombi .......................................................13
12 Sequential operation.........................................14
13 Automatic programmes....................................15
14 Individual recipes..............................................17
15 Timer functions .................................................18
16 Childproof lock..................................................19
17 Basic settings....................................................20
18 Cleaning aid.......................................................21
19 Cleaning and servicing.....................................22
20 Troubleshooting................................................24
21 Disposal.............................................................26
22 Customer Service..............................................26
23 How it works......................................................27
24 INSTALLATION INSTRUCTIONS ......................38
24.1 Safe installation ................................................39
1 Safety
Observe the following safety instructions.
1.1 General information
¡Read this instruction manual carefully.
¡Keep the instruction manual and the
product information safe for future refer-
ence or for the next owner.
¡Do not connect the appliance if it has been
damaged in transit.
1.2 Intended use
Only a licensed professional may connect ap-
pliances without plugs. Damage caused by in-
correct connection is not covered under the
warranty.
The appliance can only be used safely if it is
correctly installed according to the safety in-
structions. The installer is responsible for en-
suring that the appliance works perfectly at its
installation location.
Only use this appliance:
¡To prepare meals and drinks.
¡For household use and similar applications,
such as: In kitchens for employees in
shops, offices and other commercial sec-
tors; in agriculture; by customers in hotels
and other residential facilities; in bed and
breakfasts.
¡up to an altitude of max. 4000m above
sea level.
This appliance complies with the standards
EN 55011 and CISPR 11. It is a group 2,
class B product. Group 2 means that mi-
crowaves are produced for the purpose of
heating food. Class B means that the appli-
ance is suitable for private households.
1.3 Restriction on user group
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.

Safety en
3
1.4 Safe use
Always place accessories in the cooking com-
partment the right way round.
→"Accessories", Page9
WARNING‒Risk of fire!
Combustible objects that are left in the cook-
ing compartment may catch fire.
▶Never store combustible objects in the
cooking compartment.
▶If smoke is emitted, the appliance must be
switched off or the plug must be pulled out
and the door must be held closed in order
to stifle any flames.
Loose food remnants, fat and meat juices
may catch fire.
▶Before using the appliance, remove the
worst of the food residues and remnants
from the cooking compartment, heating ele-
ments and accessories.
Opening the appliance door creates a
draught. Greaseproof paper may come into
contact with the heating element and catch
fire.
▶Never place greaseproof paper loosely
over accessories when preheating the ap-
pliance and while cooking.
▶Always cut greaseproof paper to size and
use a plate or baking tin to hold it down.
WARNING‒Risk of burns!
The appliance and its parts that can be
touched become hot during use.
▶Caution should be exercised here in order
to avoid touching heating elements.
▶Young children under 8 years of age must
be kept away from the appliance.
Accessories and cookware get very hot.
▶Always use oven gloves to remove ac-
cessories or cookware from the cooking
compartment.
When the cooking compartment is hot, any al-
coholic vapours inside may catch fire. The ap-
pliance door may spring open. Hot steam and
jets of flame may escape.
▶Only use small quantities of drinks with a
high alcohol content in food.
▶Do not heat spirits (≥ 15% vol.) when undi-
luted (e.g. for marinating or pouring over
food).
▶Open the appliance door carefully.
WARNING‒Risk of scalding!
The accessible parts of the appliance become
hot during operation.
▶Never touch these hot parts.
▶Keep children at a safe distance.
Hot steam may escape when you open the
appliance door. Steam may not be visible, de-
pending on the temperature.
▶Open the appliance door carefully.
▶Keep children at a safe distance.
If there is water in the cooking compartment
when it is hot, this may create hot steam.
▶Never pour water into the cooking compart-
ment when the cooking compartment is
hot.
WARNING‒Risk of injury!
Scratched glass in the appliance door may
develop into a crack.
▶Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass
on the appliance door, as they may scratch
the surface.
The hinges on the appliance door move when
the door is opened and closed, which could
trap your fingers.
▶Keep your hands away from the hinges.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶Repairs to the appliance should only be
carried out by trained specialist staff.
▶Only use genuine spare parts when repair-
ing the appliance.
▶If the power cord of this appliance is dam-
aged, it must be replaced by the manufac-
turer, the manufacturer's Customer Service
or a similarly qualified person in order to
prevent any risk.
If the insulation of the power cord is dam-
aged, this is dangerous.
▶Never let the power cord come into contact
with hot appliance parts or heat sources.
▶Never let the power cord come into contact
with sharp points or edges.
▶Never kink, crush or modify the power
cord.
An ingress of moisture can cause an electric
shock.
▶Do not use steam- or high-pressure clean-
ers to clean the appliance.
If the appliance or the power cord is dam-
aged, this is dangerous.
▶Never operate a damaged appliance.

en Safety
4
▶Never operate an appliance with a cracked
or fractured surface.
▶If the appliance or the power cable is dam-
aged, immediately switch off the fuse in the
fuse box.
▶Call customer services. →Page26
WARNING‒Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶Keep packaging material away from chil-
dren.
▶Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
1.5 Microwave
CAREFULLY READ THE IMPORTANT SAFETY
INSTRUCTIONS AND KEEP THEM SAFE FOR
FUTURE USE
WARNING‒Risk of fire!
Using the appliance for anything other than its
intended purpose is dangerous and may
cause damage. For example, heated slippers
and pillows filled with grain or cereal may
catch fire, even several hours later.
▶Never dry food or clothing with the appli-
ance.
▶Never heat up slippers, pillows filled with
grain or cereal, sponges, damp cleaning
cloths or similar with the appliance.
▶The appliance must only be used to pre-
pare food and drink.
Food and its packaging and containers may
catch fire.
▶Never heat food in heat-retaining pack-
aging.
▶Do not leave food unattended while it is
heating in containers made of plastic, pa-
per or other combustible materials.
▶Never set the microwave power too high or
the cooking time too long. Follow the in-
structions provided in this user manual.
▶Never use the microwave to dry food.
▶Never defrost or heat food with a low water
content, such as bread, at too high a mi-
crowave power or for too long.
Cooking oil may catch fire.
▶Never use the microwave to heat cooking
oil on its own.
WARNING‒Risk of explosion!
Liquids and other food may easily explode
when in containers that have been tightly
sealed.
▶Never heat liquids or other food in contain-
ers that have been tightly sealed.
WARNING‒Risk of burns!
Foods with peel or skin may burst or explode
during heating, or even afterwards.
▶Never cook eggs in their shell or heat hard-
boiled eggs in their shell.
▶Never cook shellfish or crustaceans.
▶Always prick the yolk of eggs before mi-
crowaving.
▶The skin of foods that have a peel or skin,
such as apples, tomatoes, potatoes and
sausages, may burst. Before heating, prick
the peel or skin.
Heat is not distributed evenly through baby
food.
▶Never heat baby food in closed containers.
▶Always remove the lid or teat.
▶Stir or shake well after heating.
▶Check the temperature before giving the
food or drink to a child.
Heated food gives off heat. The cookware
may become hot.
▶Always use oven gloves to remove cook-
ware or accessories from the cooking com-
partment.
Airtight packaging may burst when food is
heated.
▶Always follow the instructions on the pack-
aging.
▶Always use oven gloves to remove the
dishes from the cooking compartment.
The accessible parts of the appliance become
hot during operation.
▶Never touch these hot parts.
▶Keep children at a safe distance.

Preventing material damage en
5
Using the appliance for anything other than its
intended purpose is dangerous. This is be-
cause, for instance, overheated slippers, pil-
lows filled with grain or cereal, sponges and
damp cleaning cloths, etc., may cause burns
to the skin.
▶Never dry food or clothing with the appli-
ance.
▶Never heat up slippers, pillows filled with
grain or cereal, sponges, damp cleaning
cloths or similar with the appliance.
▶The appliance must only be used to pre-
pare food and drink.
WARNING‒Risk of scalding!
There is a possibility of delayed boiling when
a liquid is heated. This means that the liquid
reaches the boiling temperature without the
usual steam bubbles rising to the surface. Ex-
ercise caution even when only gently shaking
the container. The hot liquid may suddenly
boil over and splatter.
▶Always place a spoon in the container
when heating liquids. This prevents delayed
boiling.
WARNING‒Risk of injury!
Unsuitable cookware may crack. Porcelain or
ceramic cookware can have small perfora-
tions in the handles and lid. These perfora-
tions conceal a cavity below. If moisture pen-
etrates this cavity, it could cause the cook-
ware to crack.
▶Only use microwave-safe cookware.
Cookware and containers made from metal or
cookware with metal edging may lead to
sparks being formed during simple mi-
crowave operation. The appliance is dam-
aged.
▶Never use metal containers during mi-
crowave-only operation.
▶Only use microwave-safe cookware or use
the microwave in combination with a type
of heating.
WARNING‒Risk of electric shock!
The appliance uses a high voltage.
▶Never remove the casing.
WARNING‒Risk of serious harm to
health!
Inadequate cleaning may destroy the surface
of the appliance, reduce its service life, and
lead to dangerous situations, such as escap-
ing microwave energy.
▶Clean the appliance on a regular basis,
and remove any food residue immediately.
▶Always keep the cooking compartment,
door seal, door and door stop clean.
→"Cleaning and servicing", Page22
Never operate the appliance if the cooking
compartment door or the door seal is dam-
aged. Microwave energy may escape.
▶Never use the appliance if the cooking
compartment door, the door seal or the
plastic door frame is damaged.
▶Any repair work must only be carried out
by customer service.
Microwave energy will escape from appli-
ances that do not have any casing.
▶Never remove the casing.
▶Contact our after-sales service if mainten-
ance or repair work is needed.
2 Preventing material damage
2.1 General
ATTENTION!
Alcoholic vapours may catch fire in the hot cooking
compartment and cause permanent damage to the ap-
pliance. The appliance door may spring open due to
an explosion and it may fall off. The door panels may
shatter and fragment. Due to the resulting negative
pressure, the cooking compartment may become con-
siderably deformed inwards.
▶Do not heat spirits (≥ 15% vol.) when undiluted (e.g.
for marinating or pouring over food).
When the cooking compartment is hot, any water in-
side it will create steam. The change in temperature
may cause damage.
▶Never pour water into the cooking compartment
when it is still hot.
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶Always wipe away the condensation after cooking.
Always allow the cooking compartment to cool
down with the door closed after cooking at high
temperatures.

en Environmental protection and saving energy
6
▶Do not keep moist food in the cooking compartment
for a long time with the door closed.
▶Do not store food in the cooking compartment.
▶Take care not to trap anything in the appliance
door.
If the seal is very dirty, the appliance door will no
longer close properly during operation. This may dam-
age the front of adjacent kitchen units.
▶Keep the seal clean at all times.
▶Never operate the appliance if the seal is damaged
or missing.
Sitting or placing objects on the appliance door may
damage it.
▶Do not place, hang or support objects on the appli-
ance door.
2.2 Microwave
Follow these instructions when using the microwave.
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
▶Metal (e.g. a spoon in a glass) must be kept at least
2cm from the cooking compartment walls and the
inside of the door.
Placing aluminium containers in the appliance may
cause sparks, which will damage the appliance.
▶Do not use aluminium containers in the appliance.
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
If you prepare several bags of microwave popcorn in
immediate succession at a microwave power level that
is too high, the cooking compartment may be dam-
aged.
▶Leave the appliance to cool down for several
minutes between each use.
▶Never set a microwave power level that is too high.
▶Use a maximum microwave output of 600 watts.
▶Always place the popcorn bag on a glass plate.
Using unsuitable cookware may result in damage.
▶When using the grill, the microwave combi mode or
the hot air, only use tableware that can withstand
the high temperatures.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Only preheat the appliance if the recipe or the recom-
mended settings tell you to do so.
¡Not preheating the appliance can reduce the en-
ergy used.
Use dark-coloured, black-coated or enamelled baking
tins.
¡These types of baking tin absorb the heat particu-
larly well.
When cooking multiple dishes, do so in succession or
in parallel.
¡The cooking compartment is heated after cooking
the first dish. This reduces the cooking time for the
following dishes.
If the cooking time is relatively long, you can switch
the appliance off 10minutes before the cooking time
ends.
¡There will be enough residual heat to finish cooking
the dish.
Hide the clock in standby mode.
¡The appliance saves energy in standby mode.
Open the appliance door as little as possible during
operation.
¡This will maintain the temperature in the cooking
compartment and eliminate the need for the appli-
ance to reheat.
Note:
The appliance requires:
¡A maximum of 1W in standby mode with the dis-
play switched on
¡A maximum of 0.5W in standby mode with the dis-
play switched off

Familiarising yourself with your appliance en
7
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Note:On certain models, specific details such as col-
our and shape may differ from those pictured.
1 2 3 4
1 23 4
1
Touch fields You can use the touch fields to set various functions directly.
2
Display The display shows the current setting values and selection options.
3
Function selector Use the function selector to set the microwave output setting, type of heating
and other functions.
4
Rotary selector Use the rotary selector to change the settings in the different operating modes.
Positions of the function selector
Use the function selector to select the functions or
types of heating.
Position Function
Zero setting
Light
1000W microwave
600W microwave
360W microwave
180W microwave
90W microwave
Hot air
Full surface grill + hot air
Full surface grill + air recirculation
⁠ Grill
Basic settings
Symbols
Use the symbols to start or stop functions, or to navig-
ate in the menu.
Symbol Function
Start
Stop
Pause or end
Cancel
Delete
Confirm or save settings
Selection arrow
Open the appliance door
Call up additional information
Calling up additional tips
Calling up the automatic pro-
grammes
Calling up individual recipes

en Familiarising yourself with your appliance
8
Symbol Function
Saving
Edit settings
Childproof lock
Call up the timer menu
Call up the long-term timer
Sequential operation
Record menu
Enter a name
Delete letters
Microwave, letting the dish rest
Demo mode
Heating with status display
Rapid heating with status display
Short-term timer
Stopwatch
Automatic programs
Weight
Cooking result
Defrosting
Cooking and combi cooking
Combination mode
Calling up the oven
Removing the oven
Adding the oven
Calling up the microwave
Removing the microwave
Adding the microwave
Colours and display
The different colours guide the user in the relevant set-
ting situations.
Colours
Orange ¡Initial settings
¡Main functions
Blue Basic settings
White Adjustable values
Display
The symbols, values and displays change, depending
on the situation.
Zoom Values and symbols that have
just been selected are dis-
played in a larger font.
Reduced display After a short time, the informa-
tion shown on the display is re-
duced and only the most im-
portant information remains.
You can change this preset
function in the basic settings.
→Page20
4.2 Automatic door opening
If you press , the appliance door springs open. Use
the recessed grip on the side of the appliance to open
the appliance door fully.
Note:If the childproof lock is activated or in the event
of a power cut, the automatic door opening function
does not work. Use the recessed grip on the side of
the appliance to open the appliance door manually.
4.3 Additional Information
Press to call up additional information.
Before starting, you receive information, e.g. about the
type of heating. You can therefore check whether the
current setting is suitable for the dish.
During operation, you receive information, e.g. about
the time that has elapsed and the time remaining.
Note:During continuous operation after heating up,
slight temperature fluctuations are normal.
4.4 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Interior lighting
When you open the appliance door, the lighting in the
cooking compartment switches on. If the appliance
door remains open, the light switches off again after a
short time.
When the operation starts, the interior lighting switches
on.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes through the ventilation slots above the
appliance door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶Do not cover the ventilation slots.
To cool the cooking compartment more quickly after
operation, the cooling fan continues to run for a certain
period afterwards. If the appliance is running in mi-
crowave operation, the appliance remains cool, but the
cooling fan still switches on. The cooling fan may con-
tinue to run even when microwave operation has
ended.

Accessories en
9
Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
Shelf positions
The cooking compartment has 4 shelf positions.
The shelf positions are numbered from bottom to top.
Insert the accessory into the guide and slide it in fully.
The cooking compartment floor at position0 is particu-
larly suitable for microwave operation. The microwave
output is best on the cooking compartment floor. Only
use microwave-safe cookware.
4.5 Standby
The appliance switches to standby mode if you have
not set any function or activated the childproof lock. In
standby mode, the brightness of the control panel is re-
duced.
Different things can be displayed in standby mode. The
GAGGENAU logo and the time are preset.
The brightness of the display depends on the vertical
viewing angle. You can change the display and the
brightness at any time in the basic settings.
→"Basic settings", Page20
4.6 Safety shut-off
For your safety, your appliance has a safety shut-off
function. If you do not operate your appliance for 12
hours, your appliance switches every kind of heating
off and the display shows a message.
This excludes programming using a long-term timer.
If you turn the function selector to , you are now be
able to start the appliance again as usual.
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
The accessories supplied may differ depending on the
appliance model.
Accessories Use
Wire rack ¡Cookware
¡Cake tins
¡Grilled items
¡Frozen meals
Tip:You can pull the wire rack ⅔ of the way
out without it tipping. You can therefore re-
move meals more easily.
Glass tray ¡Large roasts
¡Moist cake
¡Bakes
¡Gratins
¡Splash guard when grilling directly on the
wire rack
When grilling, slide the glass tray in at
level1
Tip:You can use the glass tray as a setdown
area during microwave operation.
Rod ¡Heating liquids in narrow containers
¡Preventing delayed boiling
¡When heating liquids, always place the
rod or a spoon into the container

en Before using for the first time
10
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial start-up
When the appliance is connected to the power supply
for the first time or following a lengthy power cut, the
settings for the initial start-up of your appliance appear.
Note:You can change →Page20 these settings at
any time in the basic settings.
Setting the language
The display shows the preset language.
1. Use the rotary selector to set the required display
language.
2. Press to confirm.
Note:When you change the language, the system re-
starts. This process takes a few seconds.
Setting the time format
The display shows the two possible formats 24h and
AM/PM. The 24h time format is preselected.
1. Use the rotary selector to set the required time
format.
2. Press to confirm.
Setting the time
The display shows the time.
1. Use the rotary selector to set the required time.
2. Press to confirm.
Setting the date format
The display shows the 3 possible date formats D.M.Y,
D/M/Y and M/D/Y. The date format D.M.Y. is preselec-
ted.
1. Use the rotary selector to set the required date
format.
2. Press to confirm.
Setting the date
The display shows the preset date. The day setting is
active.
1. Use the rotary selector to set the required day.
2. Use to switch to the month setting
3. Use the rotary selector to set the month.
4. Use to switch to the year setting
5. Use the rotary selector to set the year.
6. Press to confirm.
Setting the temperature format
The display shows the two possible units °C and °F.
The unit °C is preselected.
1. Use the rotary selector to set the required unit.
2. Press to confirm.
Ending the initial start-up
The display shows "Initial set-up complete".
▶Press to confirm.
aThe appliance enters standby mode and the
standby screen appears. The appliance is ready to
use.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1. Ensure that there is no leftover packaging, ac-
cessories or other objects in the cooking compart-
ment.
2. Clean the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3. Close the appliance door.
4. Ventilate the room while the appliance is heating.
5. Heat up the appliance for one hour at 200°C using
Grill and Hot air modes .
→"Setting the type of heating and the temperature",
Page12
6. Allow the appliance to cool down.
7. Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a
dish cloth.
6.3 Cleaning the accessories
▶Clean the accessory thoroughly with soapy water
and a soft dish cloth.
7 Basic operation
7.1 Activating the appliance
1. To exit standby mode, open or close the door, turn
the function selector or touch a control panel.
2. Set the required function.
Notes
¡When "Standby screen" = "Off" is selected in the ba-
sic settings, turn the function selector to exit standby
mode.
¡If you do not make any settings for an extended
period after activation, the standby display is shown.
¡When the door is open, the interior lighting switches
off after a short time.
7.2 Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
7.3 Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.

Microwave en
11
8 Microwave
You can use the microwave to cook, heat up, bake or
defrost food very quickly. The microwave can be used
on its own or in combination with a type of heating.
8.1 Microwave-safe cookware and
accessories
To heat food evenly and avoid damaging your appli-
ance, it is important to use the right cookware and ac-
cessories.
Note:Read the manufacturer's instructions before us-
ing any cookware in the microwave. If in doubt, carry
out a cookware test.
Microwave-safe
Cookware and accessor-
ies
Reason
Cookware made from
heat-resistant, microwave-
safe material:
¡Glass
¡Glass ceramic
¡Porcelain
¡Temperature-resistant
plastic
¡Fully glazed ceramic
without cracks
These materials allow mi-
crowaves to pass
through. Microwaves do
not damage heat-resistant
cookware.
Metal cutlery Note:You can use metal
cutlery, e.g. place a
spoon in a glass, to pre-
vent delayed boiling.
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
▶Metal (e.g. a spoon in a glass) must be kept at least
2cm from the cooking compartment walls and the
inside of the door.
Not microwave-safe
Cookware and accessor-
ies
Reason
Metal cookware Metal does not allow mi-
crowaves to pass
through. The food hardly
heats up.
Cookware with gold or sil-
ver decoration
Microwaves can damage
gold and silver decora-
tion.
Tip:You can only use this
kind of cookware if the
manufacturer guarantees
that it is microwave-safe.
8.2 Microwave power settings
This is where you can find an overview of the different
microwave output settings and when to use them.
Microwave output in
watts
Use
90 Defrost delicate foods.
180 Defrost food and continue
cooking.
360 Cook meat and fish or heat del-
icate foods.
600 Heat and cook food.
1000 Heat liquids.
Notes
¡You can set the microwave output settings for a
specific duration:
–1000W for 30minutes
–90W, 180W, 360W and 600W for 90minutes
¡The maximum setting is for heating liquids. To pro-
tect the appliance, it reduces the maximum mi-
crowave output setting after some time. Full power
is made available again after a cooling period.
8.3 Setting the microwave
1. Use the function selector to set the required mi-
crowave output setting.
2. Use the rotary selector to set the cooking time.
3. Press to start.
aThe appliance starts. You can see the cooking time
counting down.
aA signal tone sounds once the time has elapsed. If
you press , open the appliance door or set the
function selector to , you can end the signal early.
The operation has finished.
Note:If you open the appliance door during cooking,
the microwave operation stops. To continue the opera-
tion, close the appliance door and press ⁠.
Tips
¡You can change the duration at any time using the
rotary selector.
¡You can change the output at any time using the
function selector. To start, press ⁠.
¡You can call up the elapsed cooking time by press-
ing . If you press , you return to the standard dis-
play.

en Oven
12
9 Oven
Your appliance has an oven mode.
9.1 Oven levels
In oven mode, you can set different types of heating.
Symbol Type of heating Temperature in °C Use
Hot air 40 ¡Leave the yeast dough to prove.
¡Defrost cream cakes.
Hot air 100-250 Bake cakes, small baked goods, and pizza on the glass
tray.
Grill + Hot air 100-250 Roast pieces of meat.
Grill + Air recircula-
tion
100-250 ¡Bakes
¡Gratinated poultry
¡Whole poultry
9.2 Setting the type of heating and the
temperature
1. Use the function selector to set the required type of
heating, e.g. Hot air.
aThe display shows and the default temperature
180°C.
2. Use the rotary selector to set the temperature.
3. If required, set the cooking time and move the cook-
ing time end to a later time:
‒Press to call up the sequential operation.
‒Use to select and set the "Cooking time"
function.
‒Use to select and set the "Cooking time end"
function.
4. Press to start.
aFrom a temperature of 100°C, the display shows
the heating symbol ⁠.
aThe bar shows the current heat-up status. Once the
set temperature has been reached, a signal tone
sounds and goes out.
Note:You can activate or deactivate a heat-up signal in
the basic settings. The signal tone sounds when the re-
quired temperature is reached.
Tips
¡You can change the temperature at any time using
the rotary selector.
¡You can change the type of heating at any time us-
ing the function selector. To start, press ⁠.
Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.
Displaying the current temperature
1. To display the interior temperature, press ⁠.
aThe display shows temperatures of 100°C and
above for a few seconds.
2. To return to the standard display, press ⁠.
Note:During continuous operation after heating up,
slight deviations in temperature are normal, depending
on the heating function.
9.3 Rapid heating
With the "Rapid heating" function, your appliance
reaches the required temperature particularly quickly.
Place your food in the cooking compartment only once
the "Rapid heating" has ended. This achieves an even
cooking result.
You must activate →Page20 the "Rapid heating" in
the basic settings.
When the "Rapid heating" is activated, the display
shows ⁠.

Grill en
13
10 Grill
You can brown or gratinate your food using the grill.
You can use the grill on its own or in combination with
the microwave.
10.1 Grill settings
Your appliance has multiple grill settings.
Grill setting Use
1 (low) ¡Soufflés
¡Deep-dish bakes
2 (medium) ¡Shallow bakes
¡Fish
3 (high) ¡Steaks
¡Sausages
¡Toast
10.2 Setting Grill mode
1. Use the function selector to set the full surface grill.
aThe display shows and grill setting 3.
2. Use the rotary selector to set the grill setting.
3. If required, set the cooking time and move the cook-
ing time end to a later time:
‒Press to call up the sequential operation.
‒Use to select and set the "Cooking time"
function.
‒Use to select and set the "Cooking time end"
function.
4. Press to start.
Tips
¡You can use the rotary selector to change the grill
setting at any time.
¡You can use the function selector to change the op-
eration mode at any time. To start, press ⁠.
Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.
11 MicroCombi
To reduce the cooking time and brown your meals, you
can use the oven type of heating or grill in combination
with the microwave.
Notes
¡You can switch on all microwave output settings ex-
cept for 1000W.
¡You can also combine the MicroCombi with the se-
quential operation for the microwave.
11.1 Setting MicroCombi
Note:You can start combined operation with an oven
type of heating or microwave output setting.
1. Use the function selector to set the required oven
type of heating or microwave output setting.
2. Use the rotary selector to set the oven temperature
or grill setting.
aDepending on the operating mode selected, the
symbol for microwave or the symbol for oven ap-
pears in the right-hand control panel. This enables
you to add the relevant other operating mode.
3. Use to add a microwave output setting.
4. Use the function selector to set the required mi-
crowave output setting.
5. Use the rotary selector to set the cooking time.
6. Press to start.
aThe appliance starts. You can see the cooking time
counting down.
aA signal tone sounds once the time has elapsed. If
you press , open the appliance door or set the
function selector to , you can end the signal early.
The operation has finished.
Changing settings
You can change the oven type of heating, the cooking
compartment temperature, the grill setting or the mi-
crowave output setting and the duration.
1. To change the settings during the operation and
stop the operation, press ⁠.
2. Choose the operating mode using or ⁠.
3. Use the function selector to change the oven type of
heating or microwave output setting.
4. Use the rotary selector to change the interior tem-
perature, the grill setting or the duration of the mi-
crowave output setting.
5. Press to start.
Deleting settings
1. To delete the settings during the operation and stop
the operation, press ⁠.
2. Choose the operating mode using or ⁠.
3. Use or to delete the type of heating.
4. Press to start.
Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.

en Sequential operation
14
12 Sequential operation
With a sequential operation, you can set up to 5 differ-
ent types of heating and cooking times that are set one
after another.
12.1 Setting a sequential operation
1. Use the function selector to set the required mi-
crowave output setting or oven type of heating.
2. Press ⁠.
aThe sequential operation menu is displayed.
3. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
4. Use to select the second phase.
5. Note:You can set a compensation time between 2
microwave output settings so that the temperature
can be evenly distributed in the food. To set the
compensation time, press and use the rotary se-
lector to set a duration.
Use the function selector to set the required mi-
crowave output setting or oven type of heating.
6. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
7. Use to select the third phase.
8. Use the function selector to set the required mi-
crowave output setting or oven type of heating.
9. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
10. Use to select "Cooking time" ⁠.
11. Use the rotary selector to set the required cooking
time.
12. Press to confirm.
aThe main menu for the sequential operation is dis-
played. The settings for the phases are shown on
the display bar.
13. Press to start.
aThe appliance starts. You can see the cooking time
counting down.
aOnce the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press ,
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Notes
¡You can add the combined operation to the sequen-
tial operation.
¡You can only select the 1000W microwave output
setting once.
¡You cannot combine the oven types of heating with
the 1000W microwave output setting.
¡The order of each setting is entirely up to you. You
can start the duration, microwave output setting or
oven type of heating.
¡If you open the appliance door during cooking, the
fan may continue to run.
Changing sequential operation
1. Press ⁠.
aThe operation stops.
2. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
3. Press and change the settings.
4. Use to exit the menu.
5. Press to start.
Deleting settings
▶Press ⁠.
Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.
12.2 Cooking time end
In oven mode, you can delay the cooking time end to a
later time. This function is not available in combination
with the microwave.
Enter the cooking time and delay the cooking time end
until 15:30, for example. The electronics system calcu-
lates the start time. The appliance starts automatically
at 14:50 and switches off at 15:30, for example.
Do not leave food which spoils easily in the oven for
too long.
Delaying the cooking time end
Requirement:The type of heating, temperature and
cooking time are set.
1. Use to select "Cooking time end" ⁠.
2. Use the rotary selector to set the required cooking
time end.
3. Press to confirm.
aThe display shows a notification that a cooking time
end has been set.
4. Press to confirm.
5. Press to start.
aThe appliance switches to standby. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start.
aThe appliance starts at the calculated time and
automatically switches off once the cooking time
has elapsed.
aOnce the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press ,
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Changing the cooking time
1. Press ⁠.
2. Use to select "Cooking time" ⁠.
3. Use the rotary selector to set the required cooking
time.
4. Press to confirm.
5. Press to start.
Changing the cooking time end
1. Press ⁠.
2. Use to select "Cooking time end" ⁠.
3. Use the rotary selector to set the required cooking
time end.
4. Press to confirm.
5. Press to start.

Automatic programmes en
15
Deleting settings
▶Press ⁠.
Cancelling the entire procedure
▶Turn the function selector to ⁠.
13 Automatic programmes
The automatic programs help you prepare different
dishes and automatically select the optimal settings.
13.1 Information on "Automatic
programmes"
Follow these tips to achieve optimal cooking results:
¡Only use food that is in perfect condition.
¡Take the food out of its packaging and weigh it. If
you cannot set the exact weight on the appliance,
round the weight up or down.
¡Only use microwave-safe, heat-resistant cookware,
e.g. made of glass or ceramic.
¡Place the food in the cold cooking compartment.
¡It is not possible to set weights outside the weight
range.
¡With many dishes, a signal tone sounds after a cer-
tain time. Turn or stir the food.
Defrosting
¡Freeze and store food flat and in portion-sized
quantities at -18°C.
¡Place the frozen food on flat cookware, such as a
glass or porcelain plate.
¡Food may not be completely defrosted by the end
of the programme. The food can nonetheless be fur-
ther processed.
¡The defrosted food should be left to stand for an ad-
ditional 15 to 90minutes until it reaches an even
temperature.
¡Liquid is produced when defrosting meat or poultry.
When turning, drain off any liquid. Do not reuse the
liquid for other purposes or allow it to come into
contact with other foods.
¡Bread and bread rolls become hard quickly. Defrost
only in the required amounts.
¡Place frozen bread rolls in the oven. Only pre-baked
bread rolls are suitable.
¡After turning, remove any minced meat that has
already defrosted.
¡Whole poultry should be placed in the cookware
breast-side down.
Vegetables
¡Fresh vegetables: Cut into pieces of equal size. Add
one tablespoon of water per 100g.
¡Frozen vegetables: Only suitable for blanched, not
pre-cooked vegetables. It is not suitable for frozen
vegetables in cream sauce. Add 1 to 3 tablespoons
of water. Do not add any water for spinach or red
cabbage.
Potatoes
¡Baked potatoes: Use potatoes of the same thick-
ness. Wash, dry and prick the skin.
Rice
¡Do not use brown rice or boil-in-the-bag rice.
¡Add two to two-and-a-half times the amount of water
to the rice.
Fish
¡Fresh fish fillet: Add 1 to 3 tablespoons of water or
lemon juice.
Leg of lamb
¡First, put the fat side facing down in the cookware.
The leg of lamb should cover two thirds of the base
of the cookware. Add 50-100ml of liquid.
Poultry
¡Only use chicken portions at refrigerator temperat-
ure.
¡Prick the skin here and there with a fork.
¡Place the chicken in the dish breast-side down.
¡Place chicken portions in the cookware skin-side
up.
Pizza, frozen
¡Use pre-baked, frozen pizza with thin crust.
13.2 Resting time
Some dishes require a resting time in the cooking com-
partment after the programme has ended.
Dish Resting time
Vegetables Approx. 5minutes
Potatoes Approx. 5minutes
First pour off the remain-
ing water.
Rice Approx. 5-10minutes
Frying Approx. 10minutes
13.3 Setting a programme
1. Set the function selector to any operating mode.
The function selector must not be moved to or
S.
2. Press to display the automatic programs.
3. Press to confirm.
aThe display shows the first programme.
4. Use the rotary selector to select the desired pro-
gramme.
5. Use to select the function.
6. Turn the rotary selector to set the weight.
7. Press to confirm.
8. Press to start.
aThe appliance starts. You can see the cooking time
counting down.
aA signal tone sounds once the time has elapsed. If
you press , open the appliance door or set the
function selector to , you can end the signal early.
The operation has finished.
Displaying tips
1. To display tips on the cookware, accessories or the
shelf positions, press ⁠.
2. Press to exit the display.

en Automatic programmes
16
Displaying notifications
appears for important information and indicates that
an action is required.
1. Press to display notifications for the preparation.
2. Press to exit the display.
Notes
¡For some dishes, the display provides instructions
for turning or stirring during preparation. Follow the
information provided.
If you do not turn or stir the dish, the programme
runs as normal until it reaches the end.
¡Opening the appliance door pauses the operation.
After closing the appliance door, continue the oper-
ation by pressing ⁠.
Interrupting the operation
1. To interrupt the operation, press ⁠.
2. Press to resume operation.
Cancelling the operation
▶To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:The fan can also continue to run when the door
is open. This is normal.
13.4 Adjusting the programme
If the cooking result does not meet your expectations,
you can adjust the programme.
1. Use to select the individual settings.
2. Use to select "Cooking result" ⁠.
3. Use the rotary selector to set the cooking result.
‒To reduce the cooking result, turn it anticlock-
wise.
‒To increase the cooking result, turn it clockwise.
4. Press to confirm.
aThe display switches to the programme and the
cooking time changes.
5. Press to confirm.
6. Press to start.
aThe appliance starts. You can see the cooking time
counting down.
Note:The change only applies for the current pro-
gramme flow.
13.5 Programme table
You can cook food very easily using the programmes. You select a programme and enter the weight of your food.
The programme applies the most suitable settings.
Defrosting
Dish Suitable food Weight range
inkg
Cookware or accessories, shelf
height
Loaf of bread1Wheat bread, mixed wheat
bread, wholemeal bread
0.20 – 1.50 Shallow cookware without lid
Cooking compartment floor
Bread rolls Wheat rolls, pre-baked 0.05 – 0.60 Wire rack
Position 1
Minced meat1Minced beef, lamb, or pork 0.20 – 1.00 Shallow cookware without lid
Cooking compartment floor
Whole poultry1Chicken, duck 0.70 – 2.00 Shallow cookware without lid
Cooking compartment floor
1Observe the signals given when it is time to turn the food.
Cooking
Dish Suitable food Weight range
inkg
Cookware or accessories, shelf
height
Fresh vegetables1Cauliflower, broccoli, carrots,
kohlrabi, leeks, peppers, cour-
gettes
0.20 – 1.00 Covered cookware
Cooking compartment floor
Frozen vegetables1Cauliflower, broccoli, carrots,
kohlrabi, red cabbage, spinach
0.15 – 1.00 Covered cookware
Cooking compartment floor
Baked potatoes Waxy potatoes, predominantly
waxy potatoes or floury potatoes,
approx. 6cm thick
0.20 – 2.00 Uncovered cookware
Cooking compartment floor
Rice1Rice, long-grain rice 0.10 – 0.50 Deep cookware with lid
Cooking compartment floor
Fresh fish fillet Fillet of pike, cod, ocean perch,
pollock, pike-perch
0.20 – 1.00 Covered cookware
Cooking compartment floor
1Observe the signals given when it is time to stir the food.

Individual recipes en
17
Combi cooking
Dish Suitable food Weight range
inkg
Cookware or accessories, shelf
height
Frozen pizza Pizza with thin base, prebaked 0.15 – 0.55 Wire rack
Position 3
Frozen lasagne Lasagne bolognese 0.40 – 1.05 Uncovered cookware
Cooking compartment floor
Fresh chicken1Whole chicken 0.80 – 1.80 Covered cookware
Cooking compartment floor
Fresh chicken portions Chicken thigh, half chicken 0.40 – 1.60 Covered cookware
Cooking compartment floor
Meat loaf Meat loaf, approx. 8cm deep 0.80 – 1.50 Uncovered cookware
Cooking compartment floor
Leg of lamb1Leg of lamb or boneless
shoulder of lamb
0.80 – 2.00 Uncovered cookware
Cooking compartment floor
1Observe the signals given when it is time to turn the food.
14 Individual recipes
You can save, record or programme up to 50 indi-
vidual recipes. You can name your recipes so that you
can access them quickly and easily when needed.
14.1 Recording a recipe
You can set up to 5 phases one after the other and re-
cord these.
1. Use the function selector to set the required mi-
crowave output setting or oven type of heating.
aThe display shows ⁠.
2. Press and use the rotary selector to select "Indi-
vidual recipes".
3. Press to confirm.
4. Use the rotary selector to select a free memory loc-
ation.
5. Press ⁠.
6. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
7. Press to start.
aThe appliance records the first phase and you can
see the cooking time counting down. You can re-
cord an additional phase once the cooking time has
elapsed. To end the phase early, press ⁠.
8. If required, select one of the options:
‒To save the recipe, press and enter a name
under ABC.
→"Entering a name", Page18
‒To cancel the recipe without saving, press ⁠.
‒To continue the recording, carry out the following
steps.
9. Press to continue the recording.
10. Use the function selector to set the required mi-
crowave output setting or type of heating.
11. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
12. Press to start.
aFor an oven type of heating, the appliance records
the cooking time.
13. Press to end this phase.
aThe appliance saves this phase with the cooking
time.
14. If required, select one of the options:
‒To save the recipe, press and enter a name
under ABC.
→"Entering a name", Page18
‒To cancel the recipe without saving, press ⁠.
‒To continue the recording, repeat the previous
steps.
Notes
¡When you open the appliance door, the recording of
the phase ends.
¡You can operate the appliance in combined opera-
tion.
→"MicroCombi", Page13
14.2 Programming a recipe
You can programme and save up to 5 phases for the
preparation.
1. Use the function selector to set the required mi-
crowave output setting or oven type of heating.
aThe display shows ⁠.
2. Press and use the rotary selector to select "Indi-
vidual recipes".
3. Press to confirm.
4. Use the rotary selector to select a free memory loc-
ation.
5. Press ⁠.
6. Enter a name under "ABC". →Page18
7. Press ⁠.
8. Use to select the first phase.
aThe appliance displays the type of heating. You can
use the function selector to change the type of heat-
ing. Operation in combined operation is possible.
→Page13
9. Use the rotary selector to set the cooking time, tem-
perature or grill setting.
10. Select one of the following options:
‒Press to select the next phase.
‒Finish making entries once the preparation is
complete.
11. Select one of the following options:
‒Press to save.

en Timer functions
18
‒To cancel without saving, press ⁠.
14.3 Entering a name
1. Enter a name for the recipe under "ABC".
2. Use the rotary selector to select the letters.
A new word always begins with a capital letter.
Latin characters, certain special characters and
numbers are available.
3. Briefly press to position the cursor to the right.
4. Press and hold to switch to umlauts and spe-
cial characters.
5. Press twice to insert a break.
6. Briefly press to position the cursor to the right.
7. Press and hold to switch to normal characters.
8. Press twice to insert a break.
9. Press to delete a letter.
10. Select one of the following options:
‒Press to save.
‒To cancel without saving, press ⁠.
14.4 Starting a recipe
1. Use the function selector to select any type of heat-
ing.
aThe display shows ⁠.
2. Press and use the rotary selector to select "Indi-
vidual recipes".
3. Press to confirm.
4. Use the rotary selector to select the desired recipe.
5. Press to start.
aThe operation starts and you can see the cooking
time counting down.
aThe display shows the settings for the phases on
the display bar.
Note:You can use the rotary selector to change the
temperature and the grill setting for the oven type of
heating, and to change the duration for the microwave
output setting while the recipe is cooking. This does
not change the saved recipe.
14.5 Changing a recipe
You can change the settings of a recorded or pro-
grammed recipe.
1. Use the function selector to select any type of heat-
ing.
aThe display shows ⁠.
2. Press and use the rotary selector to select "Indi-
vidual recipes".
3. Press to confirm.
4. Use the rotary selector to select the desired recipe.
5. Press ⁠.
6. Use to select the required phase.
aThe display shows the settings. You can use the
rotary selector or function selector to change the
settings.
7. Select one of the following options:
‒Press to save.
‒To cancel without saving, press ⁠.
14.6 Deleting a recipe
1. Use the function selector to select any type of heat-
ing.
aThe display shows ⁠.
2. Press and use the rotary selector to select "Indi-
vidual recipes".
3. Press to confirm.
4. Use the rotary selector to select the desired recipe.
5. Use to delete the recipe.
6. Press to confirm.
15 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
15.1 Calling up the timer menu
Requirements
¡The appliance is activated.
¡The function selector is set to or ⁠.
▶Press ⁠.
aThe timer menu is displayed.
Notes
¡If you turn the function selector to a type of heating
or basic settings while the short-term timer or stop
watch is running, a notification appears on the dis-
play.
Press to confirm the notification and interrupt the
short-term timer or the stop watch. The appliance is
ready to use.
¡In order to continue the short-term timer or stop
watch, turn the function selector to or ⁠.
¡You can use the short-term timer and the stopwatch
at the same time.
¡If the function selector is set to , the display only
shows the short-term timer.
¡If the function selector is set to , the display shows
the short-term timer and the stopwatch.
15.2 Short-term timer
The short-term timer only runs if you have not set any
other function. You can enter a maximum of
90minutes.
Set the short-term timer
1. Call up the timer menu.
aThe display shows "Timer" ⁠.
2. Use the rotary selector to set the required cooking
time.
3. Press to start.
aThe appliance closes the timer menu and the time
counts down.
aThe display shows and the time that has elapsed.
aA signal tone sounds once the time has elapsed. If
you press , you can end the signal early.
Tip:Press to exit the timer menu. The settings are
lost.

Childproof lock en
19
Stopping the short-term timer
1. Press ⁠.
2. Use and "Timer" to select and press ⁠.
3. To allow the timer to continue counting down, press
⁠.
Switching off the timer early
1. Press ⁠.
2. Use and "Timer" to select and press ⁠.
15.3 Stopwatch
The stopwatch only runs if you have not set any other
function. The stopwatch counts upwards from
0seconds up to 90minutes.
You can use the pause function to pause the stop-
watch occasionally.
Starting the stopwatch
1. Press ⁠.
2. Use to select "Stopwatch" ⁠.
3. Press to start.
aThe appliance closes the timer menu and the time
counts down.
aThe display shows and the time that has elapsed.
Stopping the stopwatch
1. Press ⁠.
2. Use to select "Stopwatch" ⁠.
3. Press ⁠.
aThe time stops and the symbol switches to start ⁠.
4. Press to start the stopwatch.
aThe time continues to run. Once it has reached
90minutes, the display pulses and a signal tone
sounds. If you press , you can end the signal.
a goes out on the display and the procedure is
ended.
Switching off the stopwatch
1. Press ⁠.
2. Use to select "Stopwatch" ⁠.
3. Press ⁠.
15.4 Long-term timer
With this function, your appliance with the Hot air type
of heating retains a temperature of 85°C.
You can keep food warm for up to 74hours without
having to switch the appliance on or off.
Do not leave food which spoils easily in the oven for
too long.
Notes
¡To use the long-term timer, you must set it to "avail-
able" in the basic settings.
→"Basic settings", Page20
¡If the short-term timer or the stopwatch is activated,
you cannot select the long-term timer.
Setting the long-term timer
1. Set the function selector to ⁠.
2. Press ⁠.
aThe display shows the default value "24h" at 85°C.
3. Press ⁠.
4. Use the rotary selector to set the required cooking
time ⁠.
5. Press to confirm.
6. Press to start.
aThe appliance starts and the display shows and
the temperature.
aThe oven lighting and the display lighting are
switched off.
aThe control panel is locked and the touch-key tones
are deactivated.
aWhen the time has elapsed, the appliance no longer
heats up. Turn the function selector to ⁠.
Switching off the long-term timer
▶To cancel the transaction, turn the function selector
to ⁠.
16 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
16.1 Activating the childproof lock
Requirements
¡The childproof lock is set to "Available" in the basic
settings.
¡The function selector is set to ⁠.
▶Press and hold for approx.6seconds.
aThe standby display appears and the display shows
⁠.
Note:If there is a power cut after the childproof lock
has been activated, the childproof lock may be deactiv-
ated when the power comes back on.
16.2 Deactivating the childproof lock
Requirement:The function selector is set to ⁠.
▶Press and hold for approx.6seconds.

en Basic settings
20
17 Basic settings
You can configure the basic settings for your appliance to meet your needs.
17.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Symbol Basic setting Settings Explanation
Brightness ¡1
¡2
¡3
¡4
¡51
¡6
¡7
¡8
Set the display brightness.
Standby screen ¡On1
– Clock
– Clock + GAGGENAU logo
– Date
– Date + GAGGENAU logo
– Clock + date
– Clock + date + GAGGENAU
logo
¡Off
Set the appearance of the standby screen.
Off: You can use this setting to reduce the
standby energy consumption of your appli-
ance.
On: You can set multiple displays. Use to
confirm "On" and use the rotary selector to
set the required display.
Display ¡Reduced1
¡Standard
Reduced: After a short time, the display
shows only the most important information.
Touch field colour ¡Grey1
¡White
Set the colour of the symbols on the touch
fields.
Touch field tone type ¡Tone 11
¡Tone 2
¡Off
Set the signal tone when you touch a touch
field.
Touch field tone
volume
¡1
¡2
¡3
¡4
¡51
¡6
¡7
¡8
Set the volume of the touch field tone.
Signal volume ¡1
¡2
¡3
¡4
¡51
¡6
¡7
¡8
Set the volume of the signal tone.
Heating-up time and
heating-up signal
¡Heating up with signal tone1
¡Rapid heating with signal tone
¡Heating up without signal tone
¡Rapid heating without signal
tone
When the appliance reaches the required
temperature, the heating-up signal tone
sounds.
Tip:During rapid heating, the cooking com-
partment reaches the required temperature
particularly quickly.
Time format ¡AM/PM
¡24h1
Set the display of the time in the 12-hour or
24-hour format.
Time Current time Set the time.
1Factory setting (may vary according to model)