Galayou Y4 User manual

2K Indicator Lights Status
User's Guide
① Click "Add device" or "+" ② Select Galayou--Model Y4 ③ Device Power On ④ Wi-Fi Setup
⑤ Scan the QR Code ⑥ Wait for Connection ⑦ Pair succeeds ⑧ The camera is online
⑨ Live Video
Light Status
Red light on
Red and blue light alternately flashing
Blue light flashing
Blue light solid
Red light quickly flashing
Warm note: Please make sure your router is connected to Internet.
Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your
smartphone. Or scan below QR code to get the APP.
Tips:
1. This outdoor security camera only works with 2.4GHz Wi-Fi, 5GHz Wi-Fi is
not supported!
2. Please put the camera near to the router during setting up the camera,
after connection succeeds, you can place the camera in another place.
Note: Put the camera close to the router(3 feet) during setting up the
camera.
1. Download and Install
Open the "Wansview Cloud" APP and register an account with your email and activate it.
Tips: Your password must be 8-16 characters, and contains at least the following three categories:
numbers, uppercase letters, lowercase letters, or special characters.
2. Register Account
3. Add Y4
Camera Status
Camera is powered on
Waiting to connect now
Connecting to Wi-Fi
WiFi connection succeeds
1. Reset camera to factory setting
2. Camera is upgrading firmware
Product Diagram
What's in the Box
Antenna
Indicator Light
White Lights & Infrared Lights
Lens
Photosensor
Microphone
Reset Button
TF Card Slot
Camera Micro USB Cable Mounting Hole
Template
Pack of ScrewsPower Adapter
Micro USB Port
Speaker
Quick Installation Guide
Wireless Outdoor Security Camera

Made in China
After-service:
[e-mail]
US
[email protected]
UK
1-323-686-3288 (US only)
Manufacturer：Shenzhen Anran Security Technology Co., Ltd
Address: No. 290, Jihua Road, Jihua street, Longgang District, Shenzhen
No. 112
Mount the Camera FAQ
Please press the reset button on the camera for 5 seconds until the
red light flashes quickly and the camera says "reset is successful",
Please wait for about one minute, then the camera will flash blue
and red light alternately and you can reconnect it now.
The camera can not connect to Wi-Fi?
1. The invited member should download the Wansview Cloud app, and register a new account first.
3. The invited member needs to open the Wansview cloud app and then click
"Receive". If he/she doesn't receive the invitation, please close the app and
then open it again.
2. The main account should open the Wansview cloud app, tap "Settings-invite family
members"--press --choose Country and then enter the invited member's account.
How to share the camera to another account?
Reset button
1. Remove the mounting bracket from the camera.
3. Install the camera to the mounting bracket and adjust it to the proper direction.
2. Drill holes in accordance with the mounting hole template and screw the mounting bracket to the
wall.
Screw Expansion Bolt Mounting Hole
Template