Gamma+ Grandstream Instruction sheet

Configuration manual
Grandstream
Type: Analog Telephone Adapter
Configuration manual Grandstream September 2021

Contents
1 Acquire the XML configuration file 1
2 Edit MAC address in XML configuration file 1
3 Log in to the web interface 1
4 Upload XML configuration file to device 1
5 Edit device configuration in web interface 2
6 Save the device configuration 2
7 Check the analogue device configuration 2
Deze configuratiehandleiding beperkt zich tot de instellingen specifiek voor
het Gamma Communications NL platform. Voor een algemene handleiding
waarin alle gebruiksmogelijkheden van het toestel aan de orde komen ver-
wijzen wij u door naar de handleidingen van de fabrikant. De screenshots in
deze handleiding zijn afkomstig van het type Grandstream Analog Telephone
Adapter.
Configuration manual Grandstream September 2021

1 Acquire the XML configuration file
Request the most recent XML configuration file from Gamma Communications NL technical support
via email or telephone.
2 Edit MAC address in XML configuration file
Open the XML configuration file in an editor and change the MAC address to that of the
corresponding Grandstream HT802 on line 4 (see Figure 1). The MAC address of the device can be
found on the back of the device. When finished save the XML configuration file.
3 Log in to the web interface
Log in to the web interface of the Grandstream HT802 (see Figure 2). The default login credentials
are:
Username admin
Password admin
4 Upload XML configuration file to device
Navigate to the tab “ADVANCED SETTINGS”, scroll to the bottom of the page and click “Upload from
local directory” in the row “Upload Configuration” (see Figure 3).
Configuration manual Grandstream Pagina 1 uit 2

On the next page, click “Choose file” and select the acquired XML configuration file. When the
correct XML configuration file has been chosen, click “Upload Configuration” to upload the XML
configuration file to the device (see Figure 4).
5 Edit device configuration in web interface
Navigate to the tab “FXS PORT1” or “FXS PORT2” depending which ports the analogue devices are
connected to and edit the following fields respectively (see Figure 5):
SIP User ID Geographical phone number of the analogue device (omit the country code)
Authenticate ID Accountcode from the Provisioning Portal
Authenticate Password Password associated with accountcode from the Provisioning Portal
Name Arbitrary name for the device
6 Save the device configuration
Scroll to the bottom of the page in the “FSX PORT1” or “FXS PORT2” tab respectively and click apply.
7 Check the analogue device configuration
When finished with the Grandstream HT802 configuration, remember to check if the analogue
device has the correct phone number configured. The phone number set on the analogue device has
to match the “SIP User ID” in the Grandstream HT802 on the corresponding FSX port.
Configuration manual Pagina 2 uit 2