8
Control panel description
1.POWER
–Main switch of the device.
2. STANDBY
–Stand-by switch and signalization LED.
3. LOOP
–Effect loop control.
4. GAIN (Drive)
–Setting of gain for DRIVE channel.
5. GAIN (Clean)
–Setting of gain for CLEAN channel.
6. CLEAN CHANNEL (Body)
–Setting of middle for CLEAN channel.
7. CLEAN CHANNEL (Tilt)
–Setting of ratio between BASS/TREBLE for CLEAN
channel.
8. CLEAN CHANNEL (Volume)
–Volume setting for CLEAN channel.
9. DRIVE CHANNEL (Bass)
–Setting of low frequencies for DRIVE channel.
10. DRIVE CHANNEL (Middle)
–Setting of middle frequencies for DRIVE channel.
11. DRIVE CHANNEL (Treble)
–Setting of high frequencies for DRIVE channel.
12. DRIVE CHANNEL (Volume)
–Volume setting for DRIVE channel.
13. BRIGHT
–Setting of high frequency gain richness for both
CLEAN and DRIVE channel.
14. NORM/ULTRA
–Switch for addition of „ultra“ gain for DRIVE
channel.
15. CLEAN/DRIVE
–Switching between CLEAN and DRIVE channel.
16. INPUT
–Amplifier input jack.
