A
PACKAGE CONTENTS
Part
1
2
3
4
5
Description
Tree Top
Tree Body
Tree Body
Tree Body
Metal Flat Stand
Quantity
1
1
1
1
1
MODEL#: K-P112842A
Congratulations on purchasing your new tree from Polytree®.Carefully follow the instructions below on
how to quickly and easily set up your new tree.
*Electrical Rating For The Tree
(For Indoor and Outdoor Use)
5 ft. 0.27A 120V 60Hz
1. Before you start to assemble your tree, choose an
appropriate location near a wall outlet.
2. Insert the tree body (4) into the top hole of the metal flat
stand. Insert the tree body (3) into the top of tree body (4).
Then insert the tree body (2) into the top of tree body (3).
Finally, insert the tree top (1) into the top of tree body (2).
See Fig.A.
3. Connect the light strings together and plug into the wall
outlet. Your entire tree should now be lit. If some bulbs do
not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Replace bulbs promptly in
order to maintain the performance of your pre-lit tree.
4. Shape and shift tree branches to fill in any gaps.
Fig.A
Fig.B
TREE ASSEMBLY INSTRUCTIONS
1
2
3
4
5
ETL#: 50G0M0075S
ASSEMBLY INSTRUCTIONS MADE IN CHINA
ASSEMBLY INSTRUCTIONS MADE IN CHINA
STORAGE INSTRUCTIONS:
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and power cord is plugged into the wall
outlet. Refer to assembly guide for instructions.
2. Please check for loose, broken or missing light bulbs and replace as needed.
TROUBLE SHOOTING TIPS
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts,Do Not Return To Place Of Purchase. Please contact us at
888-919-0070 or visit our website at www.polygroup.com. One of our customer service representatives
will be happy to assist you.
1. Remove all ornaments and decorations. For pre-lit trees, first unplug cord from the wall outlet and
then disconnect light extension cord between each section of the tree.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and
rotate the upper pole in both directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below and fold all tips toward
the pole until the bottom section is removed from the tree stand.
5. Carefully place all tree sections into shipping box and tape it shut.
6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
Each pre-lit tree includes spare bulbs and fuses.The spare bulbs and fuses of the tree top and tree body are
seperated packed in a PP bag.
SPARE PARTS
For trees with UL in/outdoor
lights, do not remove bulbs with the white ring base.These bulbs are the safety
fused lamps. Removing these bulbs will permanently damage the light string and will void the limited
warranty of this product.
ATTENTION
