2500 Wall Mount
3
NOTICE TO INSTALLERS
The following instructions are meant as a guide only. This guide is intended to assist you with
the install ation and operation of the Model 25 00 Wall Mounted Backstop. Jobsite conditions
will be different for each project, and conditions may change during the project. Any
suggestions or tips contained herein are for general information, and may not apply to y our
particular installation.
Please contact Gared /PSS for additional information if you are unsure how to proceed with the
installation at any time, or if jobsite or building conditions change before or during this
installation, thus affecting the corr ect installation of this unit .
It is imperative to inspect all material being used in this installation BEFORE you begin.
Confirm that materials and parts received correspond to those listed on the packing list and
production drawings. If any materials or parts have been damaged during shipping or are
missing as a result of shipping, you must file a freight claim with th e delivering freight company.
Missing or damaged material must also be noted on the Bill of Lad ing at the time of delivery.
If materials or parts are determined to be missing due to factory error or oversight, contact
Gared /PSS immediately at 800 -325-2682/ 800-848-8034.
Follow all local safety codes and OSHA regulations. Gared /PSS will not be held liable, in any
way, for improper installa tion or faulty workmanship at the jobsite.
Before proceeding with assembly. READ ALL INSTRUCTIONS AND ASSEMBLY
PROCEDURES. Make sure all parts have been received and are not damaged.
This backstop has been manufactured in accordance with the specificatio ns provided by the
Owner/Architect.
