Table of Contents
Section Page No.
Introduction 1
Cautions and Warnings 2
Assembly and Setup 3-13
Electrical Installation 14
Operation 15
aintenance 15
Accessories 16
Introduction
Thank you for your purchase of a basketball goal height adjuster. To ensure that our equipment
will provide years of use to you, we are including this installation, operation, and maintenance
guide. This guide will provide information on the proper assembly and installation methods,
operating procedures, and preventative maintenance of your height adjuster.
It is recommended that an individual who has been properly trained perform assembly and set up
of the goal height adjuster. No one under the age of 18 should attempt assembly or set up of the
unit, unless properly supervised.
To prevent normal wear and tear from shortening the life of the height adjuster, preventative
maintenance inspections and repairs should be performed at least once per year. If the height
adjuster is subject to high or unusual usage, inspections should be scheduled to occur more
frequently. If items are found to be nonconforming, replacements can be ordered from an
authorized dealer. When contacting your dealer, please have information regarding the name of
the project, and any applicable warranty information.
Please note that manufacturer assumes no responsibility for the building structure to support its
products. It is the responsibility of the building designers to determine the correct structure size
to support our products. We will provide your structural engineers with all required weight and
loading information for the project in order for them to calculate the appropriate structure.
