Garland Enodis GD-152H Service manual
INSTALLATION, OPERATING
& SERVICE INSTRUCTIONS
FOR GARLAND
GD SERIES
GAS COUNTER UNITS
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER
FLAMMABLE VAPORS OR LIQUIDS IN THE
VICINITY OF THIS OR ANY OTHER APPLIANCE.
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH.
READ THE INSTALLATION, OPERATION AND
MAINTENANCE INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT HAS BEEN CERTIFIED AS COMMERCIAL COOKING EQUIPMENT AND MUST BE INSTALLED
BY PROFESSIONAL PERSONNEL AS SPECIFIED.
For Your Safety:
Post in a prominent location, instructions to be followed in the event the user smells gas. is information shall be
obtained by consulting your local gas supplier.
GARLAND COMMERCIAL INDUSTRIES
GARLAND COMMERCIAL RANGES,
LTD.
Enodis UK LTD.
IMPORTANT INFORMATION
Keep appliance area free and clear from combustibles
TABLE OF CONTENTS
IMPORTANT INFORMATION ........................................................................................................ 2
SPECIFICATIONS .............................................................................................................................. 4
PRE INSTALLATION ......................................................................................................................... 4
INSTALLATION ................................................................................................................................. 5
ADJUSTMENTS ................................................................................................................................. 7
OPERATION FOR “FF” MODELS ................................................................................................... 11
MAINTENANCE INSTRUCTIONS .................................................................................................12
PARTS AND SERVICE ......................................................................................................................12
PRE INSTALLATION
Damage Check
Rating Plate
SPECIFICATIONS
MODEL NUMBER MANIFOLD
INLET SIZE
MANIFOLD PRESSURE
“WC
INPUT
BTU/H
GD-152H(J)(FF), GD-302H(J)(FF), GD-304H(J)(FF) 3/4” 4.0 10.0 14,800
GD-15F(J) 1/2” 4.2 9.0 45,000
GD-15G(J)(FF), GD-15GTH(J), GD-24G(J)(FF),
GD-24GTH(J), GD-36G(J)(FF), GD-36GTH(J) 3/4” 4.0 10.0 20,000
GD-18RB(J)(FF), GD-24RB(J)(FF),
GD-30RB(J)(FF), GD-36RB(J)(FF) 3/4” 4.0 10.0 15,000
INSTALLATION
General
Clearances
MINIMUM INSTALLATION CLEARANCES TO
ADJACENT COMBUSTIBLE/NON-COMBUSTABLE
WALLS OR BASE
Model #
Sides & Back
Floor Or
Base
Combustible
Non
Combustible
6”
(152mm) 0” Combustible
GD-15F(J) 6”
(152mm) 0” Non
Combustible
GD-15G(J)(FF),
GD-25G(J)(FF),
GD-36G(J)(FF),
GD-15GTH(J),
GD-24GTH(J),
GD-36GTH(J)
6”
(152mm) 0” Combustible
FOR INSTALLATION IN NON COMBUSTIBLE
LOCATIONS ONLY
GD-18RB(J)(FF),
GD-24RB(J)(FF),
GD-30RB(J)(FF),
GD-36RB(J)(FF)
N/A 0” Non
Combustible
Gas Connections
INSTALLATION Continued
REAR VIEW
FRONT VIEW
Installation of Banking Plates
Installation of Non-Combustible
Counter Stands (Optional)
Ventilation
Air Supply
INSTALLATION Continued
ADJUSTMENTS
Burner Adjustments – All Units
Hot Plates
Pilot Burner Adjustment
Burner Operation
Fryers
Before Operating the Fryer
ADJUSTMENTS Continued
Pilot Burner Adjustment
To Operate Main Burner
Shutdown Instructions
ADJUSTMENTS Continued
Calibration Instructions
Griddles
Lighting Instructions And
Pilot Burner Adjustment
MAKE SURE THE THERMOSTAT IN ON OFF
POSITION
Burner Operation
Hi-Lo Valve Adjustment
Calibration Instructions
Broilers
Pilot Burner Adjustment
Burner Operation
HI-LO Valve Adjustment
Flame Size
Flame Size Chart
MODEL
NUMBER
DESCRIPTION PILOT FLAME
LENGTH
GD-152H(FF) Hot Plate 1/2” [13 mm]
GD-302H(FF) Hot Plate 1/2” [13 mm]
GD-304H(FF) Hot Plate 1/2” [13 mm]
GD-15F Fryer 3/4” [19 mm]
GD-15G(FF) Griddle 3/4” [19 mm]
GD-15GTH Griddle 3/4” [19 mm]
GD-24G(FF) Griddle 3/4” [19 mm]
GD-24GTH Griddle 3/4” [19 mm]
GD-36G(FF) Griddle 3/4” [19 mm]
GD-36TGTH Griddle 3/4” [19 mm]
GD-18RB(FF) Broiler 1/2” [13 mm]
GD-24RB[FF] Broiler 1/2” [13 mm]
GD-30RB(FF) Broiler 1/2” [ 13 mm]
GD-36RB(FF) Broiler 1/2” [13 mm]
ADJUSTMENTS Continued
OPERATION FOR “FF” MODELS
Open Type Hot Plate
Lighting the Open Type Hot Plate
Broilers
Lighting the Broiler
Griddles
Lighting the Griddle
OPERATION Continued
MAINTENANCE INSTRUCTIONS
NOTE:
“Regular Maintenance Ensures Peak Performance.”
Cleaning Instructions
PARTS AND SERVICE
NOTES
NOTES
NOTES
Other manuals for Enodis GD-152H
1
This manual suits for next models
27
Table of contents
Other Garland Hob manuals
