Garland 900 Series Manual

!"#$%&&%$'(")*+,-.%$'("*%"/*0%'"$-"%"1-*!"#$.21$'("#
!"#$"%&"!"#$"'
!"#$"%" "&'()*+"#,-*
.(+"&'*'/,("0*+1'2*+"3+45+6
!"#$"7" "8,92*+"#,-*:
"";-,"&'*'/,("0*+1'2*+"3+45+6:
())"*+,-+."
!/+01,-0"#2-3"$2,-+
Welbilt Asia Pacific Private Limited
%<=>">*?9('+@"A,4@B"CDEFDG
#'H5+/I"J+(56+B"&'()4K,6+"G7L7M<
;+*N"O%EP%M<DPD7D="!Q4'*N"R(S9'6TP$0>U-+*2'*5P/,Q
451+6";I+"K'/596+"':"V,6"'**9:5645',("purposes ,(*TP"arland"6+:+6X+s"5I+"6')I5"5,"Q4Y+"
5+/I('/4*"/I4()+"'("5I+"'(5+6+:5",V"K6,)6+::"-'5I,95"K6',6"(,5'/+P
"!"#$"'"*7583""
A!ZD[<D\=D6

2
THIS PRODUCT HAS BEEN CERTIFIED AS
COMMERCIAL COOKING EQUIPMENT AND
MUST BE INSTALLED BY PROFESSIONAL
PERSONNEL AS SPECIFIED.
PLEASE READ ALL SECTIONS OF THIS MANUAL
AND RETAIN FOR FUTURE REFERENCE.
INSTALLATION AND ELECTRICAL CONNECTION
MUST COMPLY WITH CURRENT CODES:
IN CANADA - THE CANADIAN ELECTRICAL
CODE PART 1 AND / OR LOCAL CODES.
IN USA – THE NATIONAL ELECTRICAL CODE
ANSI / NFPA – CURRENT EDITION.
ENSURE ELECTRICAL SUPPLY CONFORMS WITH
ELECTRICAL CHARACTERISTICS SHOWN ON
THE RATING PLATE.
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent
using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation
instructions provided with the product, or any product that has its serial number defaced, obliterated or removed,
or which has been modified or repaired using unauthorized parts or by unauthorized service agents.
For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com.
The information contained herein, (including design and parts specifications), may be superseded and is subject
to change without notice.
IMPORTANT INFORMATION
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS OR
LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER
APPLIANCE
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE PROPERTY DAMAGE, INJURY,
OR DEATH. READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT
WARNING:

Preface
Table of Contents
General Information
Information for the Reade
Warning, Signs and Symbols
General Information of the Appliance
Procedure for Requesting Service and Warranty
Safety Instruction
Technical Data
Data Table
Data Plate
Overall Dimension
Handling and Installing
Packaging and Transport
Handling and Lifting
Safety Devices and Accessories
Position and Fixing
Electric Power Connection
Use and Operation
Control Panel Description
Switch ON/OFF
Routine Cleaning and Maintenance
Trouble Shooting
Limited Warranty for Commercial Products (APAC)
2
3
4
4
4
6
6
7
8
8
8
9
11
11
12
12
12
13
14
14
15
16
17
18
TABLE OF CONTENTS
Page
3

4
GENERAL INFORMATION
Please read all instructions in this manual in details before operating the appliance. To find the specific
topics of interest, you may refer to the table of content. Please take note of the following icons:
All the information is instructed to general readers, i.e. for users of the appliance.
All the information is meant for specific users, i.e. all skilled operators authorized to
handle, transport, install, service, repair and scrap the appliance.
Electric Shock Hazard or High Voltage
Imminent danger
→Non-observance leads to death or serious injury (caused by electric shock)
Hot Surface
Dangerous situation
→Non-observance can lead to slight or semi-serious injury (caused by hot surface)
Warning
Damage
→Non-observance can lead damage
Pace Maker (Especially for Induction)
Possible Danger
→Non-observance can lead to death or serious injury
Injury Risk
Possible Danger
→Non-observance can lead to death or serious injury
Information for the Reader
Warning, Signs and Symbols
• Warning
(i) Warnings are indicated with a pictogram and a signal word.
(ii) The type and source of the risks, as well as the consequences are mentioned in the instructions
for avoiding the danger. The margins of the pictograms and signal words used are explained in
section “Signs” and “Symbols”.
•Signs

GENERAL INFORMATION
PE
→Connect wire to the earth
Important
→non-observance can lead damage
Note
→Note for special appliance
Attention
→Non-observance can lead damage
User sign
→information must be read by user
Technician sign
→information must be read by technician
CE Certification
→The appliance have a license of CE Certificate
1. Instruction, single step
2.
Instruction must be followed
in the order given
Instruction can be carried out
in any sequence
Bullet points, such as
“•”, “_”, “ etc
→
Instruction, multiple steps
Instruction, multiple steps An action is required here
5
• Symbols
Symbols Meaning Explanation

GENERAL INFORMATION
6
Garland Electric Bain Marie is an excellent cooking appliance made of stainless steel with 200 mm
depth of single or double bowls. It consists of one or two silicon flexible heaters with 2kW and 4kW
power rates. It also equipped with additional pan holder for proper combination GN Pan and dry
heater put below the bowl for cleanliness. The water inlet place on the wall inside the bowl and
operated by taps from front. This appliance is suitable for warming food and sauce. Water tempera-
ture is maintained by thermostat with maximum working temperature of 110°C. Unit to be installed
on open cabinet or similar elements, cantilever, or solid block solutions. Featuring is rear seamless
fitting to Grandis family products and unique removable seamless front panel. It is very important
to keep this instruction book together with the appliance for future consultation. If this appliance
sold or transferred elsewhere, ensure that this manual goes along with it. Therefore, new user
should read about its functions and other relevant information.
Contact WELBILT ASIA PACIFIC for all service requests. Please state the data provided on the
nameplate as well as the description of the fault.
GARLAND gives 12 months Warranty with certain conditions. GARLAND will decline any claims of
accidents caused by improper use, disobey rules, and/ or disobey warnings. Examples of the cases,
which invalidate the Warranty:
1. Improper use by untrained person(s)
2. Disobey local regulation(s) related to installation and safety standards
3. Not doing routine maintenance
4. Replace certain parts with non-genuine spare part
5. Do not follow the manual instructions properly
If you have any doubts or questions related to our product, please call WELBILT ASIA PACIFIC.
General Information of the Appliance
Procedure for Requesting Service and Warranty
• Requesting Service
• Warranty

*>?!=@"94*=<AH=9;4
=
9NS5,1231b""efore installing, place the appliance on solid, at, stable and horizontal
""":96V4/+"4(@"/,((+/5',("4X4'*42'*'5TP"
A+4@"all instructions"2+V,6+"9:e.";I':"4KK*'4(/+"':"V,6"V,,@"K6+K4645',(",(*TP"#+*,-"46+":4V+5T"
'(:569/5',(:"5o be complied
. Rmproper installation, maintenance, cleaning, or modification to the appliance could lead to severe
'(?96T",6"@+45I"4(@"/,9*@"@4Q4)+"5I+"4KK*'4(/+P
. he mechanics must guide the staff regularly to avoid accident and damage of the appliance.
. he appliance is used by skilled staff only.
. 8."_.;"K*4/+"5I+"4KK*'4(/+"'n places that are eposed to toic or eplosive materialscontents.
. D  place the appliance near ammable materials such gasoline, fat, clothes, liquid gas, paper, etc.
6. 8."_.;"K*4/+"5I+"4KK*'4(/+"'("-+5",6"I9Q'@"6,,Q,",6"epose"to"64'(",6"(+46"-45+6"*+4Y:B"+5/P
. 8."_.;"9:+"5I+"4KK*'4(/+"V,6"@6T'()"/*,5I+:B"K4K+6B",6"*ive 4('Q4*:P
. 8."_.;"9:+"5I+"4KK*'4(/+"5,"I+45"(,(FV,,@"K6,@9/5:P
. ]lace"5I+"4KK*'4(/+"'("4"),,@"X+(5'*45+@"6,,QP
. Detach the gas line and allow the appliace to cool before cleaning.
\\P 8."_.;"5,9/I"5I+"46+4 indicated with this sign and beware of severe burning inury.
\<P 8."_.;"455+QK5"5,"@':Q4(5*+",6"6+K4'6"5I+"4KK*'4(/+P"nly"495I,6'H+@"Q+/I4('/:"are allowed.
F >X,'@"the lectric ain arie"'(:54**45',("(+15"5,"a 06T+6P
F R5"':"6+/,QQ+(@+@"5,"Y++K"4":4V+"@':54(/+"2+5-++("the appliance 4(@",5I+6
Y'5/I+("+S9'KQ+(5"*'Y+ the"06T+6P
94IA<@"<9*cb
 nly authorized and qualified mechanics can do the maintenance and
repairs.
;96(".00"4(@"@':/,((+/5"5I+"4KK*'4(/+""2+V,6+",K+('()"V6,(5"K4(+*"4(@
4//+::'()"+*+/56'/4*"46+4"'(:'@+"5I+"4KK*'4(/+P
!D!H=<9H"*E;Hc"E>d><Bb

able  echnical pecification of lectric ain arie
;+/I('/4*"K*45+"6+K,65:"5I+"/966+(5")4:":+55'()P"
0')P"\"
=!HE49H>D"B>=>
7
:%$%*;%<&-
:%$%*=&%$-
 
$5Q+/
!
E BM  E BM 8
;W+,2//"B-N+3.-53"YNNZ K-Q17
!
B+S17
!
E+-R71
!
K-Q17
!
B+S17
!
%DD" LDD 7ED[77D 7DD LDD 7ED[ 77D
*-SS-3R"B-N+3.-53"YNNZ %EE LLE \D<D 7EE LLE \D<D
H55T-3R" *P,L20+"KeB"YNNZ G\D E\D
"!
%GD E\D
"!
K21+,"93/+1"H533+01-53
B,2-3"F2/W+
!
K5,T-3R"=+NS+,21P,+"YfHZ GDF\\D GDF\\D
!/+01,-0"H53.PNS1-53 <
!
YW M"YW
!/+01,-0"H533+01-53 \_">J"<G DZ"ED[%D3H G_">J"MD DZ"ED[%D3H
<+]P-,+Q"!/+01,-02/"*PSS/O"Y2NS.Z L L
B-,+01"E+21"!N-..-53"YTKZ DP<E DPED
D21+31"E+21"!N-..-53"YTKZ DPMD DP7D
*1+2N"!N-..-53"YcRg7Z DPEL \P\=
A"\"["g
[\
A"\"["g
[\A"\"["g [\
A"\"["g
[\
E BM  E BM 8

E BM 
=!HE49H>D"B>=>
L
Overall Dimension
0')P"<"

E BM 8
,"-.!/-01%20,0
!"
#$%&'('

HANDLING AND INSTALLING
11
Important! Before installing, place the appliance on solid, flat, stable and horizontal
surface and connection availability.
The following instructions are intended for authorized and qualified installer. Before doing installation,
adjustment, and maintenance operations, the installer must follow local and legal regulations. Cut the
electrical power before doing any installation.
1. This appliance uses electrical supply. Installation should be done according to:
a. Local and international standards
b. Local recommendation, such as building standards and recommendation concern with combustion
c. Directions and regulations from the gas and power sup ply companies
d. Regulation concern with prevention accident measures
e. Fire prevention regulations
f. Applicable I.E.C (International Electro technical Comm ission) regulations
2. Remove all packaging material and protective coatings.
3. Ensure electric power supply is sufficient to operate this ap pliance.
4. Before testing, put the appliance in a good ventilated room and keep all flammable material away
5. Before cleaning or maintaining the appliance, please cut off electric power and isolate gas supply
(if any) to the safe place.
The packaging carries all information necessary for loading and unloading. When unpacking, check that all
components are present in the correct quantities and undamaged. The packaging materials must be
properly disposed of in accordance with legal requirements
Packaging and Transport
• Packaging
The packaging is designed to designed to reduce space and accommodate to the type of transport
used. To ease transportation, some components may be removed from the appliance and packed
seperately.
• Transport
Different mode of shipment/transportation(s) may be selected, depending on the
destination. During transport, secure the packaging firmly to prevent undesirable shifting.

HANDLING AND INSTALLING
12
Handling and Lifting
Safety Devices and Accessories
The appliance can be handled by using fork-lift or hook equipment of suitable load-carrying
capacity. Before lifting, check the position of the load’s centre of gravity.
The appliance is provided with safety devices. The additional devices must be added if necessary to
comply with the relevant legal requirement during the installation.
Important! When engaging with the lifting equipment, watch out for any gas supply
connection.
Important! Make a daily check that the safety devices are properly install and in good
working order.
The appliance is equipped with the included or optional accessories. There are Lava Stones and Extra Nozzle
as included accessories; Clip Plate for Joining as optional accessory.
Position and Fixing
1. Only authorized personnel is allowed to do the installation.
2. Install the appliance according to National Safety Standard about electric-heated standard.
3. Install the appliance under an extractor fan to remove the cooking fumes. Install the appliance separately or
side by side with other appliance according to a recommended range.
4. Place the Electric Bain Marie on solid, flat, and horizontal surface.
5. Adjust the height of the four feet by using brackets.
6. Before turning ON the appliance, remove the protective film. Remove any adhesive with appropriate
solvent.
7. Dispose all packaging materials according to national laws.

To avoid electric shock, it is necessary to have earth connection. You can find the
earth connection at the terminal boards, identified with symbol to where earth
wire has to connect.
HANDLING AND INSTALLING
13
Electric Power Connection
1. Before connecting the appliance to the main supply, compare the electrical data in the rating plate
(on the appliance side panel) to the local electric energy supply. Make sure the main voltage correspond
to the voltage indicated on the nameplate of the appliance.
2. Only registered installation companies can work on the electrical installation concerned with certain local
and national regulations. The companies are responsible for all interpretation of all regulations, as well as
performing the installation and safety instructions. The warning signs and nameplates must be strictly
complied.
3. The appliance is equipped with a power terminal and connected with power cable and power socket.
4. DO NOT place the power cable near heat sources or water leakage area.
WARNING!
Incorrect voltage may damage the appliance.
WARNING!
-E BM 6 (1N AC 230V 50/60Hz 2kW)
-E BM 8 (3N AC 400V 50/60Hz 4kW)

3)4("#$(5647"*&5#
!%
@"+'&'%
"his appliance is for professional use. efore operating, please ensure that the appliance is in good
condition and place it in a good ventilated room. elow are several preliminaries warnings to
adhered to:
1. If there is a persistent breakdown, please contact authorized mechanic.
2. ser is only responsible for daily routine cleaning for maintenance.
3. ualified mechanics must do all operations related to installation and maintenance according to
Regulation in force.
4. se the lectric ain arie for ARI D and A. D  use the lectric ain arie
for other purposes. Any other uses may be considered as improper and dangerous use. lease
control the appliance when operating.
5. When operating lectric ain arie for the first time, carefully clean the appliance to remove
industrial oil lubricant.
6. After using the lectric ain arie, turn the knob to  position.
?.'/+.2(!"'62(86,#+&-/&.'
or eample E BM 8
=(
ig. 
A  *>?.+-@/0/(A-1/.-B(C1-D
to turn  the appliance and adust the cooking temperature
'.??1(6EB-/(%0+,
to indicate that the appliance is   
F?BB-G(6EB-/(%0+,
to indicate that the heating process is working
  H0/?.(I0BJ?
to fill the water tank
"(

USE AND OPERATION
15
• Turn the Appliance ON
1. Pour hot water to the bowl from water valve ± 20 mm from the bottom.
2. Turn Thermostat Control Knob to ON position. The Green Pilot Lamp will light to indicate the
appliance is ready to use.
3. Turn Thermostat Control Knob to again to adjust the temperature. The Yellow Pilot Lamp will
light to indicate the heater is working.
4. Put the basin into the tank.
5. Adjust Thermostat temperature (300 C – 1100 C)
6. If the temperature has reached, the Yellow Pilot Lamp will OFF. The lamp will ON again when
the temperature decreases.
• Turn the Appliance OFF
1. Turn the Thermostat Control Knob to zero (0) position.
2. The Green Pilot Lamp will OFF to indicate the appliance is OFF.
3. After cooking, empty the water container, turn water outlet handle anticlockwise.

!"#$%&'(#&$))"*$%+#&',&maintain&'(#&./%+'*,%$"*'0&$%1&1/2$3*"*'04&5%&'(#&+$6#&,.&$%0&.$*"/2#67&1,&%,'&
$''#8)'&',&6,"9#&issues by yourself. Contact Welbilt Asia for advise4&:,&%,'&$''#8)'&',&1*68$%'"#&'(#&
$))"*$%+#7&unless authorized mechanics.
=,2&2,/'*%#&+"#$%*%>&)2,+#667&)"#$6#&.,"",?&the )2,+#1/2#s&3#",?&$%1&take note of the&?$2%*%>@
!"#$%&'()*'+&%&,(+&-(.+%&$'&+&)'
AB
1. C%)"/>&'(#&D$*%&E$2*#&$%1&$"",?&'(#&#F/*)8#%'&',&+,,"&+,8)"#'#"0&3#.,2#&$''#8)'*%>&',&+"#$%&*'4
2. H#8,9#&'(#&?$'#2&.2,8&'(#&D$*%&E$2*#4&I/2%&'(#&9$"9#&$%1&$"",?&'(#&?$'#2&',&12$*%&*%',&$&3/+-#'4
J(#%&'(#&?$'#2&*6&./""0&12$*%#17&+",6#&'(#&'$)4
3. :#'$+(&$%0&#$6*"0&2#8,9$3"#&#L'#2*,2&)$2'67&6/+(&$6&)$%67&"*16&$%1&-%,364&M"$+#&'(#8&*%&$&6*%- ,.&
(,'7&6,$)0&?$'#2&$%1&$"",?&'(#8&',&6,$-&',&",,6#%&$%0&6'/33,2%&.,,1&)$2'*+"#6&,2&6'$*%64 N%+#&
3$-#1O,%&6)*""6&($9#&3#>/%&',&",,6#%7&6+2/3&'(#&)$2'6&',&2#8,9#&$%0&)#26*6'#%'&3*'6&,.&.,,14 H*%6#&
'(#&?$6(#1&)*#+#6&$%1&6#'&'(#8&,%&'(#&+,/%'#2&',&1204
4. =*""&'(#&3$6#&,.&'(#&D$*%&E$2*#&?*'(&.2#6(7&+"#$%&?$'#24&Q11&$&3*'&,.&"*F/*1&1#'#2>#%'4&I/2%&'(#&/%*'
,%&$%1&6#'&'(#&'(#28,6'$'&',&(*>(4&Q"",?&'(#&/%*'&',&2#$+(&*'6&8$L*8/8&,)#2$'*%>&'#8)#2$'/2#
and then turn off the power.
5. J$*'&.,2&'(#&?$'#2&',&+,,"&6"*>('"04&J#$2*%>&)2,'#+'*9#&>",9#67&6+2/3&'(#&*%'#2*,2&,.&'(#&3$6#&?*'( $&
6+,/2*%>&)$14
6. Drain the soapy water from the unit. Refill with cool water and scrub with a kitchen sponge
',&2#8,9#&$%0&2#6*1/$"&1#32*64&:2$*%&$%1&2*%6#7&2#)#$'*%>&$6&8$%0&'*8#6&$6&%#+#66$20&',&#%6/2#
'(#&/%*'&*6&.2##&.2,8&1#'#2>#%'6&$%1&+(#8*+$"64&J(#%&2*%6*%>&*6&+,8)"#'#7&?*)#&'(#&D$*%&E$2*#
3$6#&120&?*'(&$%&,"1&',?#"4
7. T)2$0&'(#&#L'#2*,2&,.&'(#&D$*%&E$2*#&?*'(&$%&$""&)/2),6#&+"#$%#2&$%1&?*)#&?*'(&)$)#2&',?#"67
removing any fingerprints, smudges or spills from the surface.
8. H#'/2%&$""&'(#&#L'#2%$"&+,8),%#%'6&',&'(#*2&)2,)#2&),6*'*,%&,%+#&'(#0&$2#&+,8)"#'#"0&1204
9. 5. unused for a period of time7&32*6-"0&2/3&'(#&6'##"&)$2'&6"*>('"0&?*'(&$&1$8)&+",'( and Vaseline oil.
Then wrap with protective film and place the appliance in a good 9#%'*"$'#1&2,,84&
&&&&&&&&&&&&&&&&+$$'&$%"&/
! If you have difficulties operating the equipemtn, please contact the Welbilt Asia.
!M"#$6#&constantly inspect he appliance for B&8,%'(64&!,%'$+'&Welbilt Asia for further&$66*6'$%+#&in 2#)$*2ing
works $%1&6#'ting *%'#29$"4
! Authorized and/or qualified personnel must do all the servicing.
&&&&&&&&&&&&&&&&
&&

TROUBLE SHOOTING
17
PROBLEM
CAUSE
CORRECTIVE ACTION
1.
Thermostat does not
function
Thermostat damaged
Check and replace
ON / OFF switch damaged
Check and replace
No electric current
Check and repair the main
supply
2.
Heating element does no t
function
Heating element damaged
Check and replace
ON / OFF switch damaged
Check and replace
No electric current
Check and repair the main
supply
3.
Pilot lamp does not function
Lamp damaged
Check and replace
No electric current
Check and repair the main
supply
4.
Contactor does not function
Coil damaged
Check and replace
Contactor damaged
Check and replace

18

19