Garmin Apollo SL50 User manual

Airspace Setup Alerts Autonav Time Nav Mode Display Pages Magnetic Variation Flight Timer Trigger Direct-To Clears CDI Scaling
Flight
Plans Waypoint
Database Nav
Info System
Info GPS
Sensor
System FunctionsSystem Functions
Date & Time Software Versions Test Display Owner Info
Satellite Search Status GPS Date & Time GPS Normal Reset
Create User Wpt by Lat/Lon Create User Wpt by Rad/Dist Delete User Wpt Modify User Wpt Delete Wpt Comment Access Database
Active Flight Plan Flight Plan 1 Flight Plan 2
* * *
Flight Plan 10 Create New Flight Plan
Nav FunctionsNav Functions
USA 800-525-6726
Canada 800-654-3415
International [phone]
FAX [phone]
http://www.iimorrow.com
P/N 561-0235-00 March 1997
1997 by II Morrow Inc.
Printed in the U.S.A.
All Rights Reserved 2345 Turner Rd., S.E.
Salem, OR 97302
II MORROW
VISIONARY THINKING TODAY
Direct-To
1. Press DIRECT-TO. 2. Use Large & Small
knobs to select wpt.
3. Press ENT.
Apollo SL50
Quick Reference Guide
SMALL KNOB With cursor flashing, changes flashing field or character. Displays next sub-page when diamond shows on right side of display. LARGE KNOB With no cursor flashing, scrolls to next page. With cursor flashing, moves cursor to next changeable field.
Nav Pages Emergency Search Parallel Track GPS Position Countdown Timer From/To/Next Wpt

1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the "Create
a New Flightplan" page. Press ENT.
3. Enter a new plan name. Press SEL. 4. Turn the SMALL knob to select characters.
Turn the LARGE knob to move to the next character.
5. Press ENT when the name is complete. 6. Turn the SMALL knob to start inserting
waypoints into the flight plan. At the INS? prompt, press ENT.
7. Turn the SMALL knob to select the first
character. Turn the LARGE knob cw to move to the next character.
8. Use the SMALL and LARGE knobs to select
the waypoint name and then press ENT.
9. The INS? prompt will flash for the next
waypoint. Press ENT and repeat steps 6-8 until finished.
10. Press SEL to stop editing
your flight plan.
Creating a Flight PlanCreating a Flight Plan
1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the desired
active flight plan and press SEL.
3. Turn the SMALL knob to select the
desired option and press ENT.
Activating a Flight PlanActivating a Flight Plan Finding Info On Any WaypointFinding Info On Any Waypoint
1. Press NRST. 2. Turn the LARGE knob to select wpt type. 3. Turn the SMALL knob to view nearby
waypoints.
4. Press DIRECT-TO and then ENT.
Emergency SearchEmergency Search
1. Press WPT. 2. Turn LARGE knob to the Create
User Wpt By Lat/Lon page and then press ENT.
3. Use the SMALL to select characters
and turn the LARGE knob to move the cursor to set the waypoint name.
4. Continue to select the necessary
characters for the Lat/Lon and runway length.
5. Press ENT when finished.
Creating A New WaypointCreating A New Waypoint
II MORROW
VISIONARY THINKING TODAY
1. Press WPT. 2. Turn the LARGE knob to the Access
Database page and press ENT.
3. Turn the LARGE knob to the desired
character and turn the SMALL knob to select characters.
4. Press INFO. 5. Turn the SMALL knob to view information. 6. Press INFO again to exit.