Garmin nuvi 3790V Instruction manual

nüvi®3790V
quick start manual

2 nüvi 3790V Quick Start Manual
Getting Started
When using your nüvi for the rst
time, complete the following tasks.
1. Power your device (page 2).
2. Mount your device (page 3).
3. Congure your device (page 4).
4. Acquire satellites (page 5).
5. Understand the Main menu
(page 5).
Powering the Device
Connect your device to the vehicle
power cable while it is plugged
into your vehicle.
Your nüvi charges as you drive.
Power Cables
Your device can be powered three
ways.
• Vehicle power cable
• USB cable
• AC adapter
If you do not plan to use your device
while it is connected to a power
source, press the Power button to
lock the device. For more on locking
the device, see page 14.

nüvi 3790V Quick Start Manual 3
Mounting Your Device
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, remove the device from
the vehicle when exiting or store it
out of direct sunlight.
1. Remove the clear plastic from the
suction cup.
2. Place the suction cup on the
windshield.
3. Flip the lever back toward the
windshield.
4. Snap the mount onto the suction
cup arm.
Suction cup mount
Vehicle power
cable
Mount
Speaker
5. Fit the bottom of your device into
the mount.
6. Tilt your device back until it
snaps into place.
Vehicle power
cable connector

4 nüvi 3790V Quick Start Manual
Conguring your Device
1. Plug the vehicle power cable into
the mount.
2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
Your unit should turn on
automatically if it is plugged in
and the vehicle is running.
3. Follow the on-screen instructions.
4. If you are using a trafc receiver,
connect the external antenna to the
trafc receiver and secure it to the
windshield using the suction cups.
Special docking
Special docking design allows the
nüvi to be used as a digital photo
frame.
1. Snap the mount onto the docking
arm.
2. Fit the bottom of your device into
the mount.
3. Tilt your device back until it snaps
into place.

nüvi 3790V Quick Start Manual 5
Front Cover
Micro-B connector
Power button
Speaker
(on back cover)
Microphone
Acquiring Satellites
The bars indicate satellite
strength.
1. Go outdoors to an open area, away
from tall buildings and trees.
2. If necessary, turn on your device.
Acquiring satellite signals can take
a few minutes. When at least one of
the bars is green, your device has
acquired satellite signals.
Main Menu
➊➋
➌ ➍
➐ ➑ ➒ ➓➎ ➏
➊ GPS satellite strength.
➋ Touch to select a transportation
mode.
➌ Touch to nd a destination.
➍ Touch to view the map.
➎ Touch to stop a route.
➏ Touch to detour a route.
➐ Touch to make a call when
connected to a compatible
mobile phone. See www.garmin
.com/bluetooth for information.
➑ Touch to activate Voice Command
➒ Touch to adjust the volume.
➓ Touch to open the menu of tools
and settings.

6 nüvi 3790V Quick Start Manual
Finding Points of Interest
1. From the Main menu, touch
Where To? > Points of Interest.
2. Select a category and a
subcategory, if necessary.
3. Select a destination.
4. Touch Go!.
Finding a Place by Spelling
the Name
1. From the Main menu, touch
Where To? > Points of Interest >
Spell Name.
2. Enter the name your destination.
3. Touch Done.
4. Select a destination.
5. Touch Go!.
Searching Near Another
Location
1. From the Main menu, touch
Where To? > > Near.
2. Select an option.
Using the On-Screen
Keyboard & Handwriting
Pad
When an on-screen keyboard appears,
touch a letter or number to enter it.
Touch to add a space. Touch
◄ and ► to move the cursor.
Touch to delete a character. Touch
and hold to erase the entire entry.
Touch Mode to select the keyboard
language mode. nüvi 3790V supports
keyboards in English, Japanese,
Korean, simplied Chinese, and
traditional Chinese.

nüvi 3790V Quick Start Manual 7
You can also use the on-screen
handwriting pad to enter characters
in English, simplied Chinese, and
traditional Chinese.
Following Your Route
Your route is marked with a magenta
line on the map. If you depart from
the original route, your device
recalculates the route. A speed limit
icon could appear as you travel on
major roadways.
➍
➌
➐
➏
➎➑
➊➋
➊ Touch to view the Next Turn
page. If a view of the junctions
exists, the Junction View page
appears.
➋ Touch to view the Turn List
page.
➌ Touch to zoom in and out.
➍ Touch to return to the Main
menu.

8 nüvi 3790V Quick Start Manual
➎ Touch to change the data eld.
➏ Touch to view the Where Am I?
page.
➐ Touch and drag the map to view
a different area of the map.
➑ Touch to view the Trip
Computer page.
Adding a Stop
Before you can add a stop, you must
be navigating a route.
1. Touch to return to the Main
menu.
2. Touch Where To?.
3. Search for the extra stop.
4. Select the stop from the search
results.
5. Touch Go!.
6. Touch Add to Current Route.
Taking a Detour
Before you can take a detour, you
must be navigating a route.
1. Touch to return to the Main
menu.
2. Touch Detour.
If the route you are currently taking is
the only reasonable option, the device
might not calculate a detour.
Orienting the Screen
Rotate your device to view in
horizontal (landscape) or vertical
(portrait) mode.

nüvi 3790V Quick Start Manual 9
Adjusting the Screen
Brightness
1. Touch Tools > Settings > Display
> Brightness.
2. Touch and move the scroll bar to
adjust screen brightness.
About Trafc
The FM Trafc Message Channel
(TMC) trafc receiver is available in
retail shops. It is built into the vehicle
power cable.
The trafc receiver and the nüvi must
be in data range of an FM station
transmitting TMC data to receive
trafc information. You do not need
to activate the subscription included
with your FM trafc receiver.
If a severe trafc delay occurs on
your route, the device automatically
recalculates the route. The trafc icon
( ) changes color to indicate the
severity of trafc conditions on your
route or on the road you are traveling.
NOTICE
Garmin is not responsible for the
accuracy of the information.
Compass
nüvi 3790V not only provides
navigation for drivers but also has a
built-in compass to pinpoint direction.
Touch Tool > Compass to start
NOTICE
GPS device close to magnet or
magnetic items may affect compass
accuracy.

10 nüvi 3790V Quick Start Manual
Enter place or city for your
destination. The compass indicates
nal destination’s direction even from
a long distance.
An example below pinpoints Tokyo.
About Voice Command
NOTICE
Voice Command supports British
English only not supports Bahasa
Malay. Some functions may be
invalid.
The Voice Command feature is
available on some nüvi models. Voice
Command allows you to use your
device by speaking the words you see
on the screen or by speaking certain
commands. The Voice Command
menu provides a list of available
commands to use.
Activating Voice Command
1. Speak Voice Command.
The voice command menu
appears.
2. Press ASR icon. The voice
command menu appears.
Tips for Using Voice
Command
• Talk in a normal voice directed at
the device to speak a command
exactly as it appears on the screen.
• Respond to voice prompts from
the device as needed.
• Speak numbers to enter numbers.
• Speak Exit to exit Voice
Command.