
statistics from one round, or statistics on one course. You can
also edit club information for clubs that are used for club advice.
1Connect the device to your computer using a USB cable.
2Go to www.garminconnect.com/golf.
3Follow the on-screen instructions.
Bluetooth Connected Features
This device has several Bluetooth connected features for your
compatible mobile device using the Garmin Connect Mobile app.
Data uploads to Garmin Connect: Sends data to Garmin
Connect using the Garmin Connect Mobile app. For more
information, go to www.garmin.com/intosports/apps.
Notifications: Alerts you when you receive phone messages.
Pairing Your Phone
1Go to www.garmin.com/intosports/apps, and download the
Garmin Connect Mobile application to your phone.
2Bring your phone within 33 ft. (10 m) of your device.
3From your device, select Setup > Bluetooth > Pair Mobile
Device and follow the on-screen instructions.
4From your phone, open the Garmin Connect Mobile
application, and follow the on-screen instructions to connect
a device.
The instructions are provided during the initial setup or by
selecting > My Device.
Connecting to a Paired Phone
Before you can connect to your phone, you must pair your
phone to your device.
When you connect to your phone using Bluetooth wireless
technology, you can share scores and other data to Garmin
Connect. You can also view phone notifications on your device.
1On your phone, enable Bluetooth wireless technology.
2On your device, select Setup > Bluetooth > Connection >
On to enable Bluetooth wireless technology.
3Select Notifications to show or hide phone notifications.
Phone Notifications
Phone notifications require a compatible smartphone to be
paired with the Approach device. When your phone receives
messages, it sends notifications to your device.
Viewing Notifications
Before you can view notifications, you must connect to your
paired phone (Connecting to a Paired Phone).
1Select > Notifications.
2Select a notification.
3Select or to scroll through the contents of the
notification.
Appendix
Installing a Memory Card
You can install a microSD™
memory card for additional storage
or pre-loaded maps.
1Pull up the weather cap À from the microSD card slot Á.
2Press in the card until it clicks.
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB
port.
Cleaning the Screen
Before you can clean the screen, you should have a soft, clean,
lint-free cloth and water, isopropyl alcohol, or eyeglass lens
cleaner.
Apply the liquid to the cloth, and gently wipe the screen with the
cloth.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1Wipe the device using a cloth dampened with a mild
detergent solution.
2Wipe it dry.
After cleaning, allow the device to dry completely.
Using the Backlight
• At any time, tap the touchscreen to turn on the backlight.
NOTE: Alerts and messages also activate the backlight.
• Select to turn on the backlight and adjust the brightness.
• Change the backlight timeout (Settings).
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life 15 hr. typical usage
Operating temperature range From -20º to 60ºC (from -4º to 140ºF)
Charging temperature range From 0º to 40ºC (from 32º to 104ºF)
Water rating IEC 60529 IPX7*
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Calibrating the Touchscreen
If the touchscreen does not seem to be responding properly, you
can calibrate it.
1Select Setup > Display > Calibrate Screen.
2Follow the on-screen instructions.
Clearing User Data
NOTE: This deletes all user-entered data.
1Hold to turn off the device.
2While holding GREEN, turn on the device.
3Select Yes.
Using the Clip
NOTE: Your clip may look slightly different from the image.
Appendix 5