Garmin Rino 650 User manual

Rino® 650
owner’s manual
August 2011 190-01183-03_0B Printed in Taiwan

© 2011 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the
written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes
in the content of this manual without obligation to notify any person or organization of such changes or
improvements. Go to www.garmin.com for current updates and supplemental information concerning the use
of this product.
Garmin
®
, the Garmin logo, BlueChart
®
, and City Navigator
®
, and Rino
®
are trademarks of Garmin Ltd. or
its subsidiaries, registered in the USA and other countries. ANT+
™
, BaseCamp
™
, chirp
™
, and HomePort
™
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac
®
is a registered trademarks of Apple Computer, Inc. microSD
™
is a trademark of SD-3C, LLC. Other
trademarks and trade names are those of their respective owners.

Table of Contents
Rino 650 Owner’s Manual i
Table of Contents
Getting Started ������������������������1
Keys1
Manual Conventions 2
Battery Information 2
Acquiring Satellite Signals 3
Registering Your Device 4
Turning On the Backlight 4
Locking the Screen 4
Radio ����������������������������������������5
Radio Channels 5
Muting the Radio 6
Radio Settings 6
About Contacts 7
Notes 7
About Peer-to-Peer Positioning 8
Radio Page Status Indicators 9
Waypoints and Tracks ����������10
Waypoints 10
About Sharing Data 11
Tracks  11
Navigating a Saved Track12
Navigation �����������������������������13
Navigating to a Destination13
Map14
Compass 14
Navigating to a Contact 16
Geocaches 16
Routes 17
Using Sight ‘N Go 18
Starting Navigation to a Man
Overboard Location 18
Customizing Your Device ����19
Customizing the Data Fields19
Customizing the Home Screen 19
Creating a Custom Prole 19
Customizing Specic Pages 20
System Settings21
Display Settings 22
Setting the Device Tones 22
Map Settings22
Tracks Settings 23
Changing the Units of Measure 24

Table of Contents
ii Rino 650 Owner’s Manual
Time Settings 24
Position Format Settings 24
Heading Settings 25
Altimeter Settings 25
Geocache Settings 26
Routing Settings 27
Marine Map Settings28
Fitness 29
Resetting Data 29
Tools ��������������������������������������30
Trip Computer 30
Elevation Plot30
Viewing the Calendar and
Almanacs 30
Calculating the Size of an Area 31
Setting an Alarm 31
Opening the Stopwatch 31
Device Information ���������������32
Updating the Software 32
Viewing Device Information 32
Specications 32
About the Batteries 33
Caring for the Device 35
Data Management 36
Appendix �������������������������������39
Additional Maps 39
Optional Accessories 39
Data Field Options 40
Troubleshooting 45
Index ��������������������������������������47

Getting Started
Rino 650 Owner’s Manual 1
Getting Started
 WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
When using your device the rst time,
you should complete the following
tasks to set up the device and get to
know the basic features.
1. Install the batteries (page 2).
2. Register the device (page 4).
3. Acquire satellites (page 3).
4. Set up the radio (page 6).
5. Mark a waypoint (page 10).
6. Record a track (page 12).
7. Navigate to a destination (page 13).
8. Calibrate the compass (page 14).
Keys
➌
➊
➋
Key Description
➊
Select to send out a call tone
If enabled (page 8), the call
key sends your position when
released

Getting Started
2 Rino 650 Owner’s Manual
➋
Hold to turn on or off the device
Select to adjust backlight,
volume, squelch level, and to
lock or unlock the screen
➌
Hold to talk PTT stands for
push-to-talk
Manual Conventions
All the pages are found on the home
screen. Use or to scroll through
the pages.
The small arrows (>) used in the text
indicate that you should select a series
of items in order, for example, “Select
 > .”
Battery Information
 WARNING
This product contains a lithium-ion
battery. To prevent personal injury or
device damage, store the device out of
direct sunlight.
The device operates on the included
lithium-ion battery pack or an optional
Alkaline battery pack, which uses four
AA batteries (page 34).
For tips on maximizing battery life and
other battery information, see page 33.
Installing the Lithium-ion
Battery
1. Locate the battery pack ➊ that
came in the product box.
➊
2. Align the metal contacts on the
battery pack with the metal contacts
on the back of the device.

Getting Started
Rino 650 Owner’s Manual 3
3. Gently press the battery pack into
place.
4. Turn the D-ring clockwise.
Charging the Lithium-ion
Battery
Before you use the device the rst
time, charge the battery. Charging a
fully depleted battery takes 6 hours.
The device will not charge when
outside the temperature range from 0°C
to 45°C (from 32°F to 113°F).
1. Plug the AC charger into a standard
wall outlet.
2. Lift weather cap.
3. Plug the small end of the AC
charger into the two-pin connector
➊ .
➊
4. Charge the device completely.
A fully charged battery can run for
up to 14 hours before it must be
recharged.
Acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Turn on the device.
3. Wait while the device searches for
satellites.

Getting Started
4 Rino 650 Owner’s Manual
A question mark ashes while the
device determines your location.
The GPS bars indicate satellite
strength. When the bars are green, the
device has acquired satellite signals.
Registering Your Device
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
Turning On the Backlight
The backlight will turn off after a
period of inactivity. To change the
backlight timeout, see page 22.
• Select .
• Touch the screen.
Alerts and messages also activate the
backlight.
Adjusting the Backlight
Brightness
The backlight levels vary for the
different power sources. For example,
the highest backlight setting while
running on AA batteries is lower
than the highest while running on the
lithium-ion battery. This is to extend
the AA battery life.
1. While the device is on, select .
2. Use  and  to adjust the brightness
level.
Locking the Screen
: This action does not lock the
keys.
1. Select .
2. Select .

Radio
Rino 650 Owner’s Manual 5
Radio
The radio page provides interface for
UHF CBRS-Australia/ UHF PRS New
Zealand radio operations.
Radio Channels
Channel Frequency
9–30, 39, 40,
49–60, 64–70,
79, 80
UHF CBRS/PRS
channels
1R–8R (31–38)
41R–48R (71–78)
Repeater
channels
: Channels 5 and 35 are reserved
as emergency channels. Channels 22
and 23 are reserved for data only, and
voice transmissions are not allowed.
Channels 61, 62, and 63 are reserved
for future allocation and should not be
used. Communication with another CB
station is not authorized on channels
1–8, 31–38, 41–48, and 71–78 within
operational range of a CB repeater
station.
Choosing a Channel
1. Select > .
2. Use  or  to select a channel.
Scanning Channels
You can scan the channels for voice
activity.
Select > .
Setting Up a Scan List
You can pick which channels and codes
to scan. Selecting specic channels and
codes reduces the scan time and helps
prevent missing a transmission.
1. Select  > > 
.
2. Select a channel to add.
3. Select .
Monitoring for Activity
You can monitor a single channel for
any activity, including static and weak

Radio
6 Rino 650 Owner’s Manual
voice signals. This is helpful if a signal
is going out of range.
Select > .
Muting the Radio
1. Select .
2. Select .
Radio Settings
Select  > > .
• —enables you to
send your current location after
each transmission (page 8).
• —enables polling.
Polling allows another Rino user to
get your location by sending a poll
request.
• —adjusts power level
on frequencies.
• :
◦ —Continuous Tone
Controlled Squelch System
allows you to ignore unwanted
calls from persons using the
same channel.
◦ —Digital-Coded Squelch
allows you to ignore unwanted
calls from persons using the
same channel.
• —Enables the
CBRS/PRS repeater channels.
• —allows you to
select the type of headset you are
using. To purchase accessories, go
to http://buy.garmin.com or contact
your Garmin dealer.
• —Voice operated
transmission controls the sensitivity
level of any Vox accessory.