Gasmate Watertech HWS0023 User manual

Designed for use with Water-Tech 3Ltr Portable Water Heater
Unique Mounting System
Aluminium and Steel Construction
Height Adjustable
Ground Stakes and Storage Bag
Gasmate®is a registered trademark of
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living, N.Z www.gasmate.co.nz
NOTE: USE OUTDOORS ONLY
SHOWER STAND
FOR PORTABLE HOT
WATER SYSTEM
Model No. HWS0023
Important: Retain these instructions for future use
03984 09/19
NEW ZEALAND ONLY For warranty details visit www.gasmate.co.nz
For warranty claims return to place of purchase. Your purchase receipt will be required for warranty claims.
For any queries or assistance call
Customer Service
Australia Only
1300 174 876
Hours of operation:
Monday to Friday 8.00am - 5.00pm EST
Email: [email protected]
Do not return to place of purchase. Keep your
purchase receipt, this will be required to make
any claims under the 12 month warranty.

1
4
2
5
3
6
1. Select a level and stable surface
free of obstacles
4. (a) Remove hand wheel and bolt
(b) Rotate mounting bracket into
position
(c) Replace hand wheel and bolt
then tighten
2. Loosen hand wheel
on base and adjust
the legs into the
most stable position
5. Mount Water Heater using the
unique mounting system that
hooks into the carry handle
assembly
Bolt
Bolt
(a)
(c)
Hand
Wheel
Base
Hand
Wheel
Hand
Wheel
Tighten
3. Twist the pole in an Anti Clock Wise direction
and extend to the required height, then tighten
in a Clock Wise Direction
6. Secure to ground using the
stakes provided
LOCK
(Clockwise)
UNLOCK
(Anti-
Clockwise)
HOLD POLE
HERE THEN
ROTATE TOP
SECTION
AND
ADJUST
POLE
HEIGHT UP
OR DOWN
Max Height 130cm
CARE INSTRUCTIONS
Using warm soapy water with a mild
detergent wipe down all surfaces
and areas of the appliance. DO NOT
submerge the appliance in a sink
or bowl.
DO NOT use abrasive cleaners or
bleach.
Rotate
Mounting
Bracket
Mounting
Bracket
(b)