GASUP IRON User manual

IRON
USER MANUAL

Co2 gas injesction key
Co2 spout
Metal sheel
PET bottle
Co2 cylinder
Water tray
PRODUCT CONFIGURATION
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 1

EASIER CARBONATION
Comfortable and ergonimic
design.
Easier hand grip.
STABLE BASE DESIGN
Detachable water tray
perfect integration with the
base.
More beautiful.
Easy to clean.
SODA MAKER DETAILS
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 2

SINGLE KEY
Carbonate has never been
easier and fun.
CO2 DISPENSER SPOUT.
UNIFORM OUTLET
PRESSURE.
The ingenious design of
the outlet hole enables
the water to fuse with
the bubbles in a more
uniform way
SODA MAKER DETAILS
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 3

REMOVE REAR COVER
INSTALL CYLINDERS
INSTALL REAR COVER
INSTALL WATER BOTTLE
CARBONATION
REMOVE THE WATER BOTTLE
Grasp the back cover with your right hand,
press the separation key with your index
nger, and push upward.
Hold the machine on your left hand, put
the cylinder in the slot with your right
hand, and rotate the cylinder into the
machine clockwise.
Grasp the middle of the rear cover with
your right hand, aim at the 4 screws of
the fuselage, push down.
Pour water up to the max waterline
indicated on the bottle into the machine
clockwise.
Press the carbonation key, each time for
2-3 seconds, release the air button and
wait for the pressure to release.
After the pressure relief is completed,
when the bubbles are owing upward in
the water bottle, the water bottle can be
removed, turn the counterclockwise.
HOW TO USE OUR SODAMAKER
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 4

NO GASEAR NADA MÀS QUE EL AGUA NATURAL
When carbonating, a small amount of liquid could bubble up
through the valves.
If the water contains sugar or other compounds the valves
could not working properly and the product could potentially
be dangerous to use.
Never add fruit slice, ice and avours in the water bottle.
Use a pitcher or mix it directly in your glass.
Rinse the water bottle carefully before lling it with water.
Don’t put fruits,
vegetables or
herbs in the water
bottle before
carbonating.
Don’t put
avours or syrup
into the water
bottle before
carbonating.
Don’t
carbonate
wine.
Don’t give
new life
to old at
soda.
Don’t put ice in
the water bottle
before
carbonating.
Don’t
carbonate
juice or milk.
Never store
the bottle in
freezer.
SAFETY GUIDELINES
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 5

NEVER CLEAN THE WATER BOTTLE IN THE DISHWASHER
KEEP THE SPARKLING WATER AWAY FROM POTENTIAL
SOURCE OF HEAT.
The water bottle is designed to withstand pressures up to
double the working pressure of the carbonator.
However, this ability is quickly destroyed if the bottle is
exposed to heat above 40 degrees celsius.
Most dishwashers operate at very high temperatures so
therefore never put the bottle in the dishwasher.
Don’t place the
sparkling water
maker close to
sunny window.
Don’t place the
sparkling water
maker close to a
hot radiator.
Dont’t place the
sparkling water
maker close to
an open ame.
Don’t use
the
sodamaker
in extreme
weather
conditions.
Iron sodamaker is designed to be used with room
temperature cylinder.
If the cylinder gets too hot it can be dangerous to use the
machine.
SAFETY GUIDELINES
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 6

DAILY MAINTENANCE
NOTES ON THE MACHINE OPERATION
1. Please refer to the parts indicated in the manual to see
if all the parts are complete, if you nd any damage or
loss, please contact the manufacturer or dealer.
2. Before use, please read the instruction carefully and
strictly.
3. The water added should never exceed the highest water
level, do not add any fruit dew, syrup, etc..
4. Unscrew the bottle only when the sodamaker is not
working.
5. Do not unscrew the cylinder without unscrewing the
water bottle.
USE AND MAINTENANCE OF SODA DISPENSER
1. After each use, please clean the fuselage carefully, do not
use sharp tools to avoid damages.
2. When transporting, make sure that the cylinder are not
into the soda dispense.
3. If it is not used for a long time, please clean the machine,
dry it and place it in the package box.
WATER BOTTLE USE AND MAINTENANCE
1. The water bottle is made of food-grade PET materials,
and it is usually scratchproof.
2. Do not heat above 30°C.
3. Use a mild detergent to clean it, cool and dry in a place
shielded from the sun.
4. Do not carbonate the bottle without adding water.
5. If the bottle has been deformed, damaged or the service
life has come to an end, please replace the bottle in time.
PAY ATTENTION
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 7

WARRANTY OF THE PRODUCT
AFTER-SALES SERVICE
USE AND MAINTENANCE CYLINDERS
1. Co2 cylinders are pressure vessels, keep away from
sharp instr ments, re, eletricity, etc.., stored in shade.
2. When you use the cylinder the surface of the cylinder will
quickly cool down, pay attention to prevent freezing
hands.
3. As the cylinder valve is a precision part, the non-profe
sional must no removed it, the valve must be always
clean.
4. If the cylinder should leak, check the presence or the co
lect position of the gasket present in the housing where
the cylinder is screwed.
5. Cylinders are rellable, professionals will check, maintain
and test the cylinder’s tightness each time it is relled.
1. The sodamaker has a 2 years warranty.
2. After purchase, if the machine is dismanteled by an
unauthorized persone, the damage caused is not covered
by the warranty.
3. Use it exclusively with gas-up accessories.
1. For any product problems, please contact our after-sales
service sta.
DAILY MAINTENANCE
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Pag. 8

GASMARINEBV
www.gas-up.it
V1.0 Gasmarine BV Srl 15/05/2019 ENG
Distribuited by: Gasmarine BV Srl
Via San Quirico 51,16163 Genova Italy
Phone number: +39 01071674
Co2 made in italy
Table of contents
Popular Other manuals by other brands

Sony
Sony MDS-MX101 Service manual

Allen-Bradley
Allen-Bradley MINOTAUR MSR178DP installation instructions

Müba
Müba KAL 275 Structure and use guidance

wellbots
wellbots FREEFLY VR instruction manual

Staubli
Staubli Cam Motion 1781 User and maintenance manual

ReelCraft
ReelCraft 5635 OLPSW5 operating instructions

Cutler-Hammer
Cutler-Hammer Digitrip 3000 Instructions for installation, operation and maintenance

Buyers Products Company
Buyers Products Company AS301 installation instructions

PALSON
PALSON COLORADO brochure

Brantz
Brantz BR6 Setup instructions

Crestron
Crestron CNPCI-8 product manual

SEVERIN
SEVERIN BLENDER Dimensions