Gateway M460 Instruction Manual

Connecting To The Port Replicator
You can attach your notebook to the port replicator while your notebook is off, on, or in Standby mode.
Attaching to the port replicator
To attach your notebook to the port replicator:
1. Connect external devices to the ports on the port replicator.
2. Rest the front edge of the notebook on your desktop, then align the mark on the left
hinge cover with the corresponding mark on the port replicator.
3. Press down on the notebook until it snaps into place.
Press down on the outside edges of the notebook. Do not press
in the middle or you may damage the LCD screen.
Caution
8510554