Winbook LM User manual

LM Manual
LM Chapter 1--Introducing The Notebook
LM Chapter 2--BIOS Setup
LM Chapter 3--Operation
LM Chapter 4--Peripherals
LM Chapter 5--Power
LM Chapter 6--Expansion
LM Chapter 7: PCMCIA
LM Chapter 8--Care
LM Appendix A

LM Chapter 1 Page 1of 15
CHAPTER 1: INTRODUCING THE NOTEBOOK
Your new Notebook features innovative advances in portable computing technology. It combines
state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer
that is compact, powerful, and easy to use.
The Notebook's modular design provides maximum expandability without compromising portability.
The hi-h performance CPU and IDE hard drive provide you with the extra processing power needed
to handle complex graphics and large sound files. Two PCMCIA slots give you the ability to use
standard PCMCIA cards, such as a LAN adapter or memory cards. The Notebook has an FDD
module in the module bay that can be replaced with a CD-ROM module giving you access to a greater
variety of graphics and multimedia software.
This User's Guide describes all features of the Notebook in an easy-to-read yet thorough manner. The
primary goals of this chapter are to identify the Notebook's external components and to provide a
quick reference of the Notebook functions for experienced computer users.
Features and Controls
This section provides an overview of the Notebook's features. For more detailed information see the
specification section in Appendix B. Your Notebook includes the following features:
CPU
The microprocessor (CPU) is the heart of the computer. It performs all the computing functions and
orchestrates the actions of the system. This Notebook was designed with a Pentium or Pentium
equivalent CPU.
CPU upgrades are possible. Changing a Pentium CPU requires much skill and knowledge. If you are
not absolutely sure that you have the capability to change a Pentium CPU by yourself, let your
Notebook dealer do it for you. Removing the CPU in an improper way may damage the motherboard
bringing you costly repairs.
This architecture of your Notebook supports the Intel P54 LM 75/ 90/ 100; the Intel P54CSLM 120/
133; the Intel P55C 150 or the Cyrix Mi. The Pentium family CPU operates at 3.3 volts or less, and
therefore consume less energy and generate less heat than 5-volt CPUS.
1.44 MB Floppy Drive
This disk drive can use either 72OKB double density or 1.44MB high density 3.5inch floppy diskettes.
You can store your data or programs on them and use them from the floppy drive. Floppy diskettes
are useful for making backups of your program diskettes and data files.
The Notebook comes with a FDD (Floppy Disk Drive) module which can be removed from the unit
and replaced with another module. For information about installing and removing the FDD, see the
section in Chapter 6 labeled Installing and Removing Modules.

LM Chapter 1 Page 2of 15
[LM 1-2]
Hard Drive
The Notebook comes with a 2.5" hard disk installed. Like the FDD, the hard drive is also of modular
design. It can be easily removed and replaced with a second hard drive for the purpose of data backup
or expansion. The hard drive in your Notebook will be either 340MB, 540MB, 810 MB or I GB
(gigabyte). Consult your dealer to find out what size hard drive your Notebook has.
LCD VGA Display
Your Notebook's VGA display is one of the following four types of LCD displays:
11.3" Color DSTN LCD with an 800 x 600 SVGA (Super VGA) resolution back-light display
11.3" Color TFT LCD with an 800 x 600 SVGA (Super VGA) resolution back-light display
12.1 " Color DSTN LCD with an 800x600 SVGA resolution back-light display
12.1 " Color TFT LCD with an 800x600 SVGA resolution back-light display
VGA Graphics Accelerator
This Notebook is equipped with a Neo Magic NM2070 VGA controller chip featuring:
Supports PCI Local Bus
Supports simultaneous display
The Integrated 128-bit wide, 7Mbits Display Memory
The Integrated Programmable Linear Address feature accelerates GUI performance
Supports NON-interlaced CRT monitors with resolutions of up to 1024x768 at 256 colors.
Supports Advanced Power Management features which minimize power consumption during:
Normal operation
Standby (Sleep) mode
Panel-off Power-saving mode
Graphics Accelerator for Windows Applications 3.3V/5V panel Interface support Hi-color display
capabilities (for TFT LCD panel only): 8 bits/ pixel up to 640 x 480 resolution 8 bits/ pixel with a
resolution of up to 1024 x 768
87/88-key Enhanced Keyboard

LM Chapter 1 Page 3of 15
The Notebook's keyboard uses a standard QWERTY layout with the addition of special function keys.
It is available in either 87 or 88-key keyboard that will emulate a full-size desktop 101/102-key
keyboard. The keyboard features an embedded numeric keypad for number intensive data entry, with
independent PgDn/ PgUp/ Home/ and End keys.
Windows 95 Enhanced Keyboard
Your keyboard supports Windows 95 by incorporating the two Windows specific keys. With the two
Windows 95 keys you will be able to access and take advantage of many of the time-saving feature of
Windows 95 software.
Touchpad
The touchpad is a pressure-sensitive pointing device which allows you to move the cursor around the
screen and make selections just as one would with a conventional mouse. The benefit a touchpad has
over a mouse is that you do not have to remove your hands from the touch-type position to access the
touchpad. The touchpad is easily accessible by your left or right thumb. Simply remove your right or
left thumb from the spacebar and reach down to activate the touchpad.
A unique function called double-tapping allows the user to make selections within a software program
or execute software applications, again, without having to remove the hands from the touch-type
position.
Please see the section in Chapter 3 labeled Touchpad for more information on the operation of the
touchpad.
Connectors
The Notebook has a number of connector (input/Output) ports for attaching peripherals to the
computer, including the following:
A 6-pin connector for a full-size keyboard or a PS/2 mouse
Two audio jacks used for External Mic (Mic In) and Speaker Out
[LM 1-4]
A 15-pin CRT (monitor) port
A standard 9-pin serial port to which you can attach a variety of serial devices, such as a mouse
or modem.
A 25-pin parallel port which is most commonly used to connect a printer or Pocket LAN to the
computer. The parallel port supports both EPP and ECP capabilities.
A 240-pin connector for the Notebook's Docking Station, in turn, supporting 32bits PCI bus, a

LM Chapter 1 Page 4of 15
PS/2 port, an AT-keyboard, a primary IDE, IS I P, CRT and Audio ports.
Two PCMCIA expansion sockets provide an interface for 2 Type 11 cards, or I Type III card.
PC cards accommodate a number of expansion options, including memory cards, modems, hard
disks, and network adapters.
One 3-pin connector provides for an AC Adapter powerjack .
One built-in IRDA SIR (Serial Infrared) transmitter/receiver for wireless communications
One built-in microphone
Two built-in speakers
14.4 Fax Modem Card (optional)
PCMCIA Socket
PCMCIA R2.0 host adapter supports one type III PCMCIA card or 2 type 11 PCMCIA cards.
PCMCIA socket accommodates SRAM, OTPROM, FLASHROM and Mask ROM memory cards up
to 64MB, and Modem/ LAN cards.
Battery and AC Power System
To power the Notebook, you can use an AC Adapter or the rechargeable battery module pack. The
system will automatically recharge the battery pack in the Notebook by using the AC Adapter. For
information on recharging the battery while simultaneously using the Notebook, see the section in this
chapter on installation and initial setup. By using the power management features described in Chapter
5, the Notebook can operate on battery power for approximately 3 hours. The battery pack takes
approximately 3 hours to recharge when the computer is.tumed off. It takes 4 hours to recharge when
the computer is in use. For extended battery-powered operation, additional battery modules may be
purchased.
[LM 1-5]
Upgradable Memory
The Notebook comes with on-board 8MB system memory that is upgradable to a total of 16MB,
24MB and 40MB by installing one or two 4MB, 8MB, 16MB additional memory modules. Refer to
the section in Chapter 6 labeled System Memory Expansion and Installing Memory Cards for detailed
infon-nation on upgrading system memory. After reviewing the appropriate sections, if you are not
completely confident that you have the know-how to install memory by yourself, definitely consult
your Notebook technician.
Built-in Level 2 Cache RAM
The Notebook provides a 256KB L2 Cache RAM card that will enhance the system performance,
especially in the Windows environment.

LM Chapter 1 Page 5of 15
Keyboard Controls
The Notebook provides a host of hot key features that are a permanent part of the computer's
operation. Some affect the LCD video display, while others control the sound volume. A complete list
of the Notebook's hot key functions is provided in Chapter 3.
Power Management
The Notebook features sophisticated power management built into the BIOS
Setup program. These features are designed to conserve power and extend
the life of the battery between charges.
SIR Port
The Notebook features an SIR Port that allows wireless, serial
communication between the Notebook and other SIR equipped devices such
as a printer or another computer. The SIR Port allows for both sending and
receiving of data. The Port is set on a hinge allowing for freedom of
movement from O' to 180'.
Audio Features
The Notebook's audio features include a sophisticated on-board 16-bit stereo
FM sound generator, two integrated speakers, internal microphone, two
input/ output
[LM 1-6]
stereo jacks, and a utility diskette that contains several Audio-Drive application
programs that run under the Windows environment.
Optional Devices
There are several optional products you can purchase to further enhance the utility of your Notebook
computer.
Removable IDE HDD
FDD Drive Module
CD-ROM Module
Factory Option 14.4 Fax Modem Card
External FDD cable
An I/0 Replicator
A Docking Station
Car Adapter
External Charger
Factory Option MPEG-1 card
Extra memory modules (4, 8, 16MB DIMM)
Secondary Battery Module

LM Chapter 1 Page 6of 15
Unpacking & Checking the Equipment
Before unpacking the Notebook, prepare a clean, stable surface to put the contents of your
Notebook's shipping container on. Altogether, you should find the following items in the Notebook
package:
The Notebook Computer (with one battery pack already installed)
Installed FDD Module
An AC Adapter
A Power Cord
A Carrying Bag (optional)
Support Diskettes
This User's Manual
[LM 1-7]
Remove all the items from the container. If anything is missing or broken inforrn
your dealer immediately. You should save the packaging; if you ever need to ship
your Notebook or send it in for service, the shipping container will definitely be
useful.
Identifying Parts of the Notebook
The illustrations that follow identify the various features and external components
of the Notebook computer. Familiarizing yourself with these terms will help you as
you read further in the following sections.
Right Front View (Panel Closed)

LM Chapter 1 Page 7of 15
Figure 1-1: Right Front View with Display Panel Closed
[LM 1-8]
Modem Port
Modem cards are optional pieces of equipment. If you purchased a Notebook with an installed
modem card, plug the phone line (UTP cable) into this port, install the communications
software, and you will be able to send or receive data transmissions across telecommunication
lines. For details on having a modem card installed, please contact your Notebook dealer.
2.Floppy Disk Drive Module
Your Notebook comes equipped with a factory-installed floppy disk drive module. Insert 3.5-inch
floppy diskettes in this drive. Note that the eject button only pops out when a diskette is inserted in the
drive. The floppy disk drive module can be removed and replaced with a different module. See the
section in Chapter 6 on optional equipment for a detailed description of installing and removing the
FDD and optional modules.
3.Removable Battery Module
Your Notebook comes equipped with a factory-installed battery pack module. After the battery runs
down, the module can be removed and replaced with a charged battery. Additional battery packs are
optional pieces of equipment.
4.LCD Panel Catch Release
To open the notebook, slide the two latches located on the sides of the Notebook towards you. This
will release the LCD panel catch. Now raise the panel to its open position as shown in Figure 1-4.
Note that the notebook's LCD panel can be customized to an angle of O' to 180'. Experiment to
achieve an angle where by there is no glare emitting from the display.
5.Removable Hard Drive Module

LM Chapter 1 Page 8of 15
The HDD module can be easily removed and replaced with a second hard drive for the purpose of
data backup or expansion. Do not attempt to remove the HDD while the Notebook is On.
[LM 1-9]
Left Front View (Panel Closed)
Figure 1-2:
Left
Audio Speaker-Out Connector
This stereo jack is used to connect external speakers or headphones. Please
refer to Chapter 3 for information on using the Audio hot key combination.
2.External Mic Connector
This stereo jack is used to connect an external microphone.
3.PCMCIA Upper Socket Eject Button
Push to release a PCMCIA Type I or Type II card from the upper slot.
4.PCMCIA sockets
Insert PCMCIA Type 1, Type 11 or Type III cards into this socket.
5.PCMCIA Lower Socket Eject Button
Push to release a PCMCIA Type I or Type 11 from the lower socket or releases a
Type III card from the socket.

LM Chapter 1 Page 9of 15
6.AC Power Jack
Connect the AC Adapter power cord to this jack.
7.Power LED Indicator
When the system is AC adapter powered, the LED indicator will light green to
indicate charging state. If the indicator is blinking fast, the system is not in
charging. If the LED is blinking slow, it indicates that the system is battery
powered and in suspend. In the LED off state, the system may either be on or off
with battery powered only.
[LM 1-10]
The Audio jacks are three-terminal stereo jacks but used as two terminal mono jack. They are
compatible with two-terminal mono plugs.
Rear View
The rear side of the Notebook contains an SIR (serial infrared) port, a serial
(COM) port, a Parallel (LPTI) port, a VGA port, an external keyboard port, a PS/2 mouse port,
and a 240-pin 1/0 Docking connector.
The rear side panel is concealed by a protective port cover. The 240-pin Docking connector
port door slides open so that it alone is visible. To reveal the remainder of the ports, the main
protective cover must be opened. There are two indented grooves on the port cover. One is on
the upper left of the port cover and the other is on the upper right. Gently pull these tabs down
to reveal the remaining connector ports.
Starting from left to eight, the rear-side ports are introduced below. Please refer to Figure 1-3
for assistance in locating these ports.
1.Serial Infrared (SIR) Port
The SIR Module allows wireless communication (transmission and receiving) between the
Notebook and another computer or between the Notebook and another SIR equipped device,
such as a printer. The Port is set on a hinge allowing for freedom of movement from O' to 180'.
With the LCD panel in the open position, the SIR module supports only two angular positions:
01 or 1800.
2.Serial (COM) Port
This port is used to connect RS-232 serial devices to the Notebook. Three types of serial
devices are mice, serial printers, and modems.
Notebook Computer User's Guide