Gcam PA627-SH3.6Dome-S Series User manual
PA627-SH3.6Dome-S Series
Color Camera
Plastic Dome Color Camera
Specification
Model PA627-SH3.6Dome-S
Pick Up Element 1/3″Sharp CCD
Effective Picture
Elements ( H*V ) NTSC:510×492, PAL:500×582
Horizontal Resolution 420 TV Lines
S/N Ratio More than 48dB
Clock Frequency (MHZ) NTSC:28.636 , PAL:28.375
Scanning System 2:1 interlace
Minimum Illumination 0.8 Lux
Synchronous System Internal, Negative sync.
Auto Electronic Shutter NTSC:1/60s~1/100,000s,PAL:1/50s~1/100,000s
Gama Characteristic 0.45
Video Output 1Vpp,75 Ω
Auto Gain Control Auto
Power/Current 12VDC(+/-10%)/ 120mA
Lens 3.6 mm
Dimension (mm) ￠118×89
Weight (g) 200
Storage Temperature -30~ +60℃
Operating Temperature -10~ +45℃
Packing List
No Name Model Number
2. User Guide PA627-SH3.6Dome-S
Series
1
1. Plastic Dome Color Camera
PA627-SH3.6Dome-S 1
Franchiser：
Notes:Before providing power for the
camera, please read this User Guide in
detail!
Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.
INTRODUCTION
Congratulations on your purchase of this product.
This UserGuide suits PA627-SN3.6Dome-S series prod-
uct. We adopt the latest SH technical of sensor and driver.
The most attractive characteristics are small and easy
hidden, suits the elevator and corridor. In addition, it owns
the characters of high definition and stability, strong anti-
jamming, rich and real color. Fixing and using this model
are convenient too. It is very good for you to apply to
yours CCTV system.
Please read this instruction manual carefully to en-
sure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
* Sensor (CCD)
Adopt 1/3" SH CCD Sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
* Gama Characteristic
Camera Gama characteristic is 0.45.
* Scanning Mode
NTSC or PAL mode.
DC12V Power Supply
Monitor
PA627-SN3.6Dome-S
TROUBLE AND SOLUTION
Link wire rule：
Power
Video
Note:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -10℃-50℃.
(Recommendatory operating temperature is -5℃--40℃.)
● Never make the camera face the sun or bright object. Other-
wise, it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to rain or moisture.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Notes：
●The power supply must through safe attestation. Its output voltage、
current、voltage polarity and operating temperature must match the
camera’s requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.
