Euro Video EVC-TI-BX213D User manual

1
www.eurovideo-cctv.com
EVC-TI-BX213D
H.264 Network Camera
Users Manual

2
www.eurovideo-cctv.com
Contents
1. Product F ea t u r e s ....................................................................................... 3
2. Accessing the C a m e r a ................................................................................ 7
3. The Se t up ................................................................................................ 13
4. Installation ............................................................................................. 14
5. Camera and I m a g e ................................................................................... 15
6. Aud i o ...................................................................................................... 21
7. L i ve ......................................................................................................... 23
8. SD C a r d ................................................................................................... 24
8.1 SD Card > Config....................................................................................................24
8.2 SD Card > Event.....................................................................................................25
8.3 SD Card > Periodical...............................................................................................26
9. F T P ......................................................................................................... 27
9.1 FTP > Config...........................................................................................................27
9.2 FTP > Event............................................................................................................28
9.3 FTP > Periodical......................................................................................................29
10. Event .................................................................................................... 30
10.1 Event > Alarm Port................................................................................................30
10.2 Event > Motion.....................................................................................................31
10.3 Event > Mapping...................................................................................................32
11. Network ................................................................................................ 33
11.1 Network > IP Setup...............................................................................................33
11.2 Network > Service Port.........................................................................................35
11.3 Network > RTP......................................................................................................36
11.4 Network > E-mail..................................................................................................37
11.5 Network > DDNS...................................................................................................38
11.6 Network > UPnP....................................................................................................40
12. System ................................................................................................. 40
12.1 System > User......................................................................................................40
12.2 System > Date & Time..........................................................................................41
12.3 System > Maintenance.........................................................................................43
12.4 System > Information...........................................................................................45

3
www.eurovideo-cctv.com
1. Product Features
The EVC ZN-XXX is a high performance H.264 network camera, designed for
demanding security installations. It delivers crisp, clear images, disclosing every
detail, thanks to its top quality 5.0 Megapixel progressive CCD sensor, Megapixel
lens and advanced image processing. EVC ZN-XXX features a removable infrared
cut filter, which enables color video in high and low light conditions, as well as IR
sensitive black/white video at night.
Supported by the industry’s largest base of video management software, the EVC
ZN-XXX provides the perfect solution for securing bank offices, airports and other
facilities, and for traffic surveillance, over IP based networks.
The optimal Power over Ethernet (IEEE 802.3af) support power to the camera to be
delivered via the network, eliminating the need for a power outlet and reducing
installation costs. Steady power could be guaranteed with a central Uninterruptible
Power Supply (UPS).

4
www.eurovideo-cctv.com
The EVC ZN-XXX o ff e rs a comprehensive set of network security a nd
management f ea t u r e s. This includes support for port based network control
(IEEE802.1X), which allows the camera to be connected to a network secured with
this control, and HTTPS encryption, which provides a secure channel between
camera and application. It also enables authentication of the video source. EVC
video products are efficiently managed with the powerful EVC Camera Management
tool, provided with the EVC ZN-XXX.

5
www.eurovideo-cctv.com
1. 8 pin Terminal connector
Audio in
Audio in (line level), for line-in mono signal (only the left channel is used from a
stereo signal)
Audio out
The Audio output (line level), which could be connected to a public address (PA)
system or an active speaker with a built-in amplifier. A pair of headphones could also
be attached.
Alarm in
One digital photo-coupled input
Alarm out
One digital photo-coupled output (200mA)
2. VIDEO OUT
Analog video out put
3. MICRO SD CARD
Save still shot in Micro SD card.
4. Network connector
The EVC ZN-XXX connects to the network via a standard network cable, and
automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). This socket could also be used to power the EVC ZN-XXX via Power over
Ethernet (PoE). The camera also negotiates the correct power level while using PoE.
5. Factory default/Control button
Press this button to install the camera using the EVC Internet Dynamic DNS (DDNS)
Service, or to restore the camera to its factory default settings, as described.
6. Power connector
12Vdc or 24Vac power connector
7. LED indicator
LED Color Description
Green Steady for connection to 10/100 Mbit/s network.
Network
Status
Amber Flashes for network activity.
Unlit No network connection.
Green Turned on if network connection is established
During the booting, it flicker
Red It flicker per 1 second during F/W upload.
8. DC IRIS

6
www.eurovideo-cctv.com
2. Accessing the Camera
Follow the instructions in the EVC ZN-XXX Installation Guide to install the camera.
The EVC ZN-XXX could be accessed with most standard operating systems and
browsers. The recommended browser is Internet Explorer for Windows with other
operating systems.
2.1 Access from a browser
1. Start a browser (Internet Explorer)
2. Enter the IP address or host name of the camera in the Location/Address field of
your browser. Press Enter.
3. Login dialog will appear when the camera is accessed for the first time. The
default user name is ADMIN, and password is 1234.
4. The camera’s Live View page is now displayed in your browser.
Note: The layout of the live view page in the camera may have been customized to meet specific
requirements. Consequently, some of the examples and functions featured here may differ from those
displayed on your own Live View page.

7
www.eurovideo-cctv.com
2.2 Accessing the camera from the Internet
Once installed, the camera is accessible on the local network (LAN). Configure the
router/firewall to allow incoming data traffic to access the camera from the Internet.
For security reasons this is usually done on a specific port. Please refer to the
documentation for router/firewall for further instructions.
2.3 Adjusting the image and focus
To a d j u st the po si t i on of the l e n s:
1. Open the
L i v e View page i n your web b r o w se r .
2. Check the i ma g e i n the L i v e View page, and move the l e n s to the desired po s i t i on.
To f ocu s the GANZ ZN-XXX, f o ll o w the i n st ru ct i on s b e l o w .
- From Setup page that you access via the Setup li n k, open the Installation p a g e .
- Unscrew the zoom pu ll e r on the l e n s by t u rn i ng it a n t i -cl o c kw i s e . A d j u st the z oo m
s e tt i ng as re qu i re d. R e -t i gh t e n the zoom pu ll e r .
- From Setup page that you access via the Setup li n k, open the Installation p a g e .
- Unscrew the zoom pu ll e r on the l e n s by t u rn i ng it a n t i -cl o c kw i s e . A d j u st the z oo m
s e tt i ng as re qu i re d. R e -t i gh t e n the zoom pu ll e r .
Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its
maximum, which gives the smallest depth of field, thus the best conditions for correct focusing. When
the focus is set with this method, it will then be maintained in any light conditions.
2.4 Back focus adjustment
When the lens is changed to a non-standard lens or when the focus achieved using
the instructions above is not satisfactory, perform back focus adjustment as follows:
1. Loosen the screw that holds the C/CS-ring. CS is standard on EVC ZN-XXX. In case your
lens is C mount type, please mount C-mount adaptor ring already given in the box.
2. Direct the camera towards an object at least 3 meters away, set the zoom puller to max
wide and check that it is possible to focus the lens.
3. Set the zoom puller to max tele and again check whether it is possible to focus the lens.
4. Direct the camera towards a close object, about 30cm away, set the zoom puller to max
wide and check whether it is possible to focus the lens.
5. Set the zoom puller to max tele and again check whether it is possible to focus the lens.
6. In case it is not possible to focus the lens in any of the four situations above, adjust the C/
CS-ring, and go back to step 2.
7. Tighten the screw that holds the C/CS-ring again.
8. After making the back focus adjustment as explained above, adjust the zoom and
focus position for the desired view.

8
www.eurovideo-cctv.com
2.5 The Live View page
Not all the buttons described below will be visible unless the Live View page has
been customized to display them.
PC(Client) Speaker
PC(Client) Mic
Digital Zoom
Snap Shot
The Snapshot button saves a still image which is currently displayed.
Full Screen
Stream change: First stream  Second stream
Play: Click this button by manually to start the stream
Stop: Click this button by manually to stop streaming

9
www.eurovideo-cctv.com
2.6 Video stream types
Motion JPEG
This format uses standard JPEG still images in the video stream. These images are
then displayed and updated at a rate sufficient to create a stream that shows
constantly updated motion.
The Motion JPEG stream uses considerable amounts of bandwidth, but also
provides excellent image quality and access to every individual image contained in
the stream.
H.264 protocols and communication methods
• RTP (Realtime Transport Protocol) is a protocol that allows programs to manage
the
real-time transmission of multimedia data, via unicast or multicast.
• RTSP (Real Time Streaming Protocol) serves as a control protocol, to negotiate the
type of transport protocol to use for the stream. RTSP is used by a viewing client to
start a unicast session
• UDP (User Datagram Protocol) is a communications protocol that offers limited
service for exchanging data in a network which uses the Internet Protocol (IP). UDP
is an alternative to the Transmission Control Protocol (TCP). The advantage of UDP
is that, it is not required to deliver all data and may drop network packets when there
is network congestion. This is suitable for live video, as there is no point in re-
transmitting old information that will not be displayed anyway.
• Unicasting is communication between a single sender and a single receiver over a
network. This means that the video stream goes independently to each user, and
each user gets own stream. A benefit of unicasting is, incase one stream fails, it only
affects one user.
• Multicast is bandwidth-conserving technology that reduces bandwidth usage by
simultaneously delivering a single stream of information to multiple network
recipients. This technology is used primarily on delimited networks (intranets), as
each user needs an uninterrupted data flow and should not rely on network routers.
2.7 How to stream H.264
Deciding on the combination of protocols and methods to use depends on your
viewing requirements, and on the properties of your network. Setting the preferred
method(s) is done in the control applet forAMC, which is found in the Windows
Control Panel. When this has been set, AMC will test all the selected methods in the
specified order, until the first functioning one is found.

www.eurovideo-cctv.com
10
RTP+RTSP
This method (actually RTP over UDP and RTSP over TCP) should be your first
consideration for live video, especially when it is important to always have an up-to-
date video stream, even if some images are lost due to network problems. This could
be configured as multicast or unicast.
Multicasting provides the most efficient usage of bandwidth, especially when there
are large numbers of clients viewing simultaneously. Note however, that a multicast
roadcast couldnot pass a network router unless the router is configured to allow this.
It is thus not possible to multicast over the Internet, for example.
Unicasting should be used for video-on-demand broadcasting, so that there is no
video traffic on the network until a client connects and requests the stream. However,
as more and more unicast clients get connected, the traffic on the network will
increase and may cause congestion. Although there is a maximum of 20 unicast
viewers, note that all multicast users combined count as 1 unicast viewer.
RTP/RTSP
This unicast method is RTP tunneled over RTSP. This could be used to exploit the
fact that it is relatively simple to configure firewalls to allow RTSP traffic.
RTP/RTSP/HTTP or RTP/RTSP/HTTPS
These two methods could also be used to traverse firewalls. Firewalls are commonly
configured to allow the HTTP protocol, allowing RTP to be tunneled.