How to pair two speakers into left and right channel Twin Usage
First, you have to check the two speaker s have been turned off.
1. Press and hold the power button, when you see the blue LED light continue pressing it until it
turns green, do the same for the second speaker, press and hold the power button, when you see
the blue LED light continue pressing it until it turns green.
2. When the green LED is blinking it means the 2 speaker is presently pairing, it will take a couple of
second (30 SECS) before the light turns blue.
3. When the LED light turns blue, press the “M” key on the touch panel, you’ll hear “left channel”
or “right channel”.
the touch panel when pressing the pairing key.
4. Turn on compatible devices’ Bluetooth and search. When you find BT2000 connect to it.
5. Now you can play music on your device, you can turn the volume up/ down, play and pause with your
device, or use the touch panel on the speakers to do so. The 2 channels are synchronized so you can
turn volume up/ down, play and pause with any speakers.
6. When you’re done, press and hold the power button for the LEFT CHANNEL for 3 to 5 seconds until you
hear the indication sound; this means the speaker is off. If you turn off the right channel first, you’ll
need to turn off the left channel separately.
How to pair two speakers into left and right channel
The left and right channels only have to be paired at the first time through the aforementioned
procedures. After that, you only have to switch on the two speakers, and then they can connect to
each other automatically.
If you only switch on one speaker, and the speaker cannot detect the other one, it will become a mono
mode stereo speaker.
If you want two speakers to become left and right channel, please follow the aforementioned
procedures.
