GEAppliances JTP25SH User manual

GE Appliances
JTP25SH – GE® 30" Built-In Single Oven
Dimensions (in inches)
Single Oven Wall-Mount or Cabinet Installation (in inches)
KW Rating
240V 3.6
208V 2.7
Breaker Size
240V 20 Amps
208V 20 Amps
Note: These ovens are not approved for stackable or side-by-side installations.
Most 30" Wall Cabinets can be used with this unit.
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
29-3/4
28-1/4
30
Recommended
cutout location
32-1/2"
from floor
21
Junction
box
location
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
Conduit
(48-1/2"
long)
5
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
A
B
23-1/2'' MIN.
Cutout depth
22'' MIN.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation instructions packed
with product for current dimensional data.
C
L
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(Must support 275 lbs.)
Specification Revised 2/06
320218
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
® GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
Electric wall ovens are not approved for installation with a plug and receptacle.
They must be hard wired in accordance with installation instructions.

GE Appliances
JTP25SH – GE® 30" Built-In Single Oven
Optional Undercounter Installation
with 36" Gas Cooktop (in inches)
Optional Undercounter Installation With
30" CleanDesign or Sealed Burner Gas Cooktop (in inches)
Specification Revised 2/06
320218
Power cord
for cooktop
Junction box
for oven
Junction box in
adjacent cabinet
for cooktop
hook-up
2 (two) 90°elbows &
sufficient pipe to
connect in adjacent
cabinet
Right cabinet side
3/4" Support
Shut-off
valve
Pressure
regulator
1/2" Black
iron pipe
Union
Conduit
(48-1/2" long)
30" built-in
oven
3-1/2" MIN.
Free space
4" To 4-1/2"
3-1/4
22
Side View
5-9/16"
Reference dim. for
MAX. support height
with typical 36" countertop
height
36" Typical
Countertop height
Power cord
Reference
5-9/16
30-7/16
Free space
1-1/2" MIN.
1-1/2" Typical countertop
Side View
22
27-5/16" MAX.
Cutout height
27-1/4" MIN.
Junction box(s) for
oven & radiant
cooktop 22" from 
floor
Add suitable filler
to match adjacent
cabinets when needed
to maintain toe kick
alignment
30" Oven W/ Rad. Cktp.
Undercounter Installation (in inches)
5
24
25
Gas or electric cooktops may be installed over
this oven. See cooktop installation instructions
for cutout size. See label on top of oven for
approved cooktop models. Gas (including the pressure regulator) and
electrical connections for gas cooktop must
be located in an adjacent accessible location.
For a 30" gas cooktop, the connections are
more conveniently made to the right.
120 Volt
Outlet
Gas
connection
Junction box
location
240/208V
36'' MIN.
4'' To 4-1/2 '' Toe kick allowable
Match toe kick height
front and two sides
22'' MIN. above
support platform
Top and/or side
fillers may be
necessary if unit
is positioned
between
existing cabinets
28-1/2'' MIN.
28-5/8'' MAX.
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
3/4'' Support
platform required
23-1/2" MIN.
Cutout depth
Allow 11/16''
overlap over side
edges of cutout
1-1/2"
Countertop
This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a
194°F temperature rating.
Note: 36" ribbon cooktops (excluding JP969) are approved for use over GE 30" single wall ovens
only. 30" ribbon cooktops (excluding JP939) are approved for use over GE 30" and GE 27" single
wall ovens. Model JP939 can be installed over 27" wall ovens except stainless model JK915 and
JK912SF. Refer to cooktop and wall oven installation information packed with products for current
dimensional data.
Installation Information: Before installing, consult installation instructions packed with product for
current dimensional data.
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
® GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center® service, 800.626.2000.

GE Appliances
Specification Revised 2/06
320218
JTP25SH – GE® 30" Built-In Single Oven
JTP25SHSS
Features and Benefits
• Self-Clean oven – Conveniently cleans oven cavity without the need for scrubbing.
• Super large oven capacity – Provides the impressively large oven interior for cooking more
dishes and large meals at one time.
• Electronic oven controls – One-touch electronic pads are easy-to-use and allow for simple
oven operation.
• TrueTemp™ system – Delivers even heat distribution and maximum oven control.
• Big ClearView™ window – An extra large clear window makes monitoring the progress of
the food easy.
• Interior oven light – Supplies light to make viewing the progress of cooking easy and convenient.
• Dual element bake – Alternates the upper broiling element and the lower baking element for
even heating and optimal baking results.
• Model JTP25SHSS – Stainless steel

1
30”Built-In Wall Oven
Installation
Instructions JTP20, JTP25, JTP28, JTP48, JTP50, JT912,
JT915, JT952, JT955, ZET938, ZET958
If you have questions, call 1.800.GE.CARES or visit our website at:
www.GEAppliances.com
Before You Begin
Read these instructions carefully and completely.
•IMPORTANT—Save these
instructions for local inspector’s use.
•IMPORTANT—Observe all
governing codes and ordinances.
• Note to Installer—Be sure to leave these
instructions with the consumer.
• Note to Consumer—Keep these
instructions for future reference.
• Proper installation is the responsibility
of the installer and product failure due
to improper installation is NOT covered
under warranty.
• NOTE—This appliance must be properly
grounded.
•ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired) into an approved junction
box. A plug and receptacle is NOT permitted
on these products.
Tools Needed
1/8”Drill Bit and
Electric or Hand Drill
Phillips
Screwdriver
Materials Needed
Strain Relief Clamp
for 1/2”conduit
Junction
Box
Wire Nuts
36”of String
229C4053P505-5
31-10524-5 06-04 JR
Parts Included
Screws For
Installation
Metal
Bottom Trim
Plastic
Bottom Trim
Optional
Metal Bottom
Trim Assembly
(on some models)

2
IMPORTANT SAFETY INSTRUCTIONS
Installation Instructions
For Your Safety
• Be sure your oven is installed properly by
a qualified installer or service technician.
• Be sure the oven is securely installed in a
cabinet that is firmly attached to the house
structure. Weight on the oven door could
cause the oven to tip and result in injury.
Never allow anyone to climb, sit, stand or
hang on the oven door.
• Make sure the cabinets and wall coverings
around the oven can withstand the
temperatures (up to 200°F) generated
by the oven.
Electrical
Requirements
This appliance must be supplied with the
proper voltage and frequency, and connected
to an individual, properly grounded branch
circuit, protected by a circuit breaker or fuse
having amperage as noted on rating plate.
(Rating Plate is located on oven frame.)
We recommend you have the electrical wiring
and hookup of your oven connected by a
qualified electrician. After installation, have the
electrician show you where your main oven
disconnect is located.
Check with your local utilities for electrical
codes which apply in your area. Failure to wire
your oven according to governing codes could
result in a hazardous condition. If there are no
local codes, your oven must be wired and fused
to meet the requirements of the National
Electrical Code, ANSI/NFPA No. 70–Latest
Edition. You can get a copy by writing:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
Effective January 1, 1996, the National
Electrical Code requires that new, but not
existing, construction utilize a four-conductor
connection to an electric oven. When installing
an electric oven in new construction, a mobile
home, recreational vehicle or an area where
local codes prohibit grounding through the
neutral conductor, follow the instructions in
the section on NEW CONSTRUCTION AND
FOUR-CONDUCTOR BRANCH CIRCUIT
CONNECTION.
You must use a three-wire, single-phase A.C.
208Y/120 Volt or 240/120 Volt, 60 hertz
electrical system. If you connect to aluminum
wiring, properly installed connectors approved
for use with aluminum wiring must be used.
WARNING: The electrical
power to the oven supply line
must be shut off while line
connections are being made. Failure
to do so could result in serious injury
or death.

3
Open oven door and remove literature
pack, broiler pan and grid, and oven
racks.
Remove Installation Instructions from
literature pack and read them carefully
before you begin.
Be sure to place all literature, Owner’s
Manual, Installations, etc. in a safe place
for future reference.
Remove packaging materials.
Check behind hinges and under
false bottom. Remove labels on the
outside of the door, plastic on trims
and panel, all tape around the oven,
and any shipping screws securing
the oven to the base pad.
(Continued on following page)
Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Installation Instructions
Pre-Installation Checklist
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
ALL INSTALLATION INFORMATION
ON THE FOLLOWING PAGES IS TO
BE USED FOR SINGLE AND DOUBLE
OVEN INSTALLATION!
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position.
This is half way between the
broil stop and fully closed.
Lift door up and
out until the
hinge arms
clear the slots.
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
Hinge Clears Slot
EASYINSTALLATIONOFYOURNEW
30"WALLOVEN
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
FORYOURSAFETY
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
ELECTRICALREQUIREMENTS
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
FORYOURSAFETY
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
ELECTRICALREQUIREMENTS
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
FORYOURSAFETY
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
ELECTRICALREQUIREMENTS
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
FORYOURSAFETY
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
Beforeyoubegin-Readtheseinstructionscompletelyandcarefully.
IMPORTANT-Savetheseinstructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALLGOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleavetheseinstructionswiththeconsumer.
OWNER-Keeptheseinstructionsforfuturereference.
Note-Thisappliancemustbeproperlygrounded(ifapplicable).
ELECTRICALREQUIREMENTS
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyoubegin-Readthese
instructionscompletelyand
carefully.
IMPORTANT-Savethese
instructionsforlocalinspector’suse.
IMPORTANT-OBSERVEALL
GOVERNINGCODESANDORDIANCES.
NotetoInstaller-Besuretoleave
theseinstructionswiththeconsumer.
OWNER-Keeptheseinstructions
forfuturereference.
Note-Thisappliancemustbe
properlygrounded(ifapplicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
EASY INSTALLATION OF YOUR NEW
30" WALL OVEN
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector’s use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector’s use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Oven Racks
Literature
Pack
Broiler Pan
and Grid

4
Place the oven on a table or platform
even with the cutout opening.
(Platform must support 150 lbs. single,
275 lbs. double.)
Installation Instructions
Pre-Installation Checklistcont.
Remove the bottom trim from the top
of the oven. It will be installed at the
end of the installation process. The
trim is wrapped separately and taped
to the top of the unit.

5
Cabinet Width 30”
Recommended
Minimum
Cutout Location
from Floor 32 1/2”
Cutout Depth 23 1/2”Min.
Cutout Width 28 1/2”Min.
28 5/8”Max.
Cutout Height 27 1/4”Min.
27 5/16”Max.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For single
ovens, the runners and braces must
support 150 lbs.
This oven is not approved for
stackable or side by side installation.
Installation Instructions
Cutout for Single Built-In Oven
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4”thick,
shim both sides equally to
establish the cutout width.
A1
C
L
SUITABLE
BRACING
TO SUPPORT
RUNNERS
2" x 4" or
EQUIVALENT
RUNNERS
21 5/8"
OVER CENTERLINE
OF CABINET
2”x 4”or
equivalent
runners
level with
bottom
of cutout
Suitable
Bracing
to Support
Runners
21 5/8”
Over Centerline
of Cabinet
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
CUTOUT
HEIGHT
27 1/4" MIN.
27 5/16" MAX.
CUTOUT
WIDTH
28 1/2" MIN.
28 5/8" MAX.
5"
22" TO
BOTTOM OF
JUNCTION BOX
JUNCTION BOX
LOCATION
RECOMMENDED
CUTOUT
LOCATION
32 1/2"
FROM THE
FLOOR
CABINET
WIDTH
30"
ALLOW 11/16" FOR
OVERLAP OF THE
OVEN OVER SIDE
EDGES OF CUTOUT
THE OPENING
BETWEEN INSIDE
WALLS MUST
BE AT LEAST
28 1/2"WIDE
ALLOW 1" FOR
OVERLAP
ON OVEN TOP
AND BOTTOM
OF CUTOUT
21"
ALLOW A MINIMUM
OF 21" FOR CLEARANCE
TO ADJACENT CORNERS,
DRAWERS, WALLS ETC.
WHEN THE DOOR IS OPENED.
Allow 11/16”for
overlap of oven
over side edges
of cutout
21”
5”
Junction Box
Location
Cabinet
Width
30”
Allow a minimum of
21”for clearance to
adjacent corners,
drawers, walls, etc.
when door is open
Cutout
Width
28 1/2”Min.
28 5/8”Max.
22”to
Bottom of
Junction Box
Cutout
Height
27 1/4”Min.
27 5/16”Max.
Opening
Between
Inside Walls
Must Be
At Least
28 1/2”Wide
Recommended
minimum cutout
location from
floor 32 1/2”
Allow 1”
minimum for
overlap of oven
top and 11⁄4 ”
overlap of oven
bottom of cutout

6
Installation Instructions
Cabinet Width 30”
Recommended
Minimum
Cutout Location
from Floor 12”
Cutout Depth 23 1/2”Min.
Cutout Width 28 1/2”Min.
28 5/8”Max.
Cutout Height 51 13/16”Min.
51 15/16”Max.
f the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For double
ovens, the runners and braces must
support 275 lbs.
Cutout for Double Built-In Oven
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4”thick,
shim both sides equally to
establish the cutout width.
A2
C
L
SUITABLE
BRACING
TO SUPPORT
RUNNERS
2" x 4" or
EQUIVALENT
RUNNERS
21 5/8"
OVER CENTERLINE
OF CABINET
2”x 4”or
equivalent
runners
level with
bottom
of cutout
Suitable
Bracing
to Support
Runners
21 5/8”
Over Centerline
of Cabinet
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
CUTOUT
HEIGHT
51 13/16" MIN.
51 15/16" MAX.
5"
CUTOUT
WIDTH
28 1/2" MIN.
28 5/8" MAX.
47" TO
BOTTOM OF
JUNCTION BOX
JUNCTION BOX
LOCATION
ALLOW 11/16"
FOR OVERLAP
OF THE OVEN
OVER SIDE EDGES
OF CUTOUT
THE OPENING
BETWEEN INSIDE
WALLS MUST
BE AT LEAST
28 1/2"WIDE
ALLOW 1" FOR
OVERLAP
ON OVEN TOP
AND BOTTOM
OF CUTOUT
21"
ALLOW A MINIMUM OF 21"
FOR CLEARANCE TO
ADJACENT CORNERS,
DRAWERS, WALLS ETC.
WHEN THE DOOR
IS OPENED.
30"
CABINET
WIDTH
RECOMMENDED
CUTOUT LOCATION
12" FROM THE FLOOR
5”
Allow 11/16”for
overlap of oven
over side edges
of cutout
30”
Cabinet
Width
21”
Junction Box
Location
Allow a minimum of
21”for clearance to
adjacent corners,
drawers, walls, etc.
when door is open
Cutout
Width
28 1/2”Min.
28 5/8”Max.
Allow 1”
minimum for
overlap of oven
top and 11⁄4 ”
overlap of
oven bottom
of cutout
Recommended
minimum cutout location
from floor 12”
47”to
Bottom of
Junction Box
Opening
Between
Inside Walls
Must Be
At Least
28 1/2”Wide Cutout
Height
51 13/16”Min.
51 15/16”Max.

7
Installation Instructions
Cutout for Single Built-In Oven
Under Counter
NOTE: This oven is not approved to be
installed under a solid disk, induction
or downdraft modular cooktop.
A3
25"
Gas or electric cooktops
may be installed over this
oven. See cooktop installation
instructions for cutout size.
See label on top of oven for
approved cooktop models.
Gas and electrical connections
for 30" gas cooktop must be
located in an adjacent accessible
location to the right. For a 36"
gas cooktop the connections
may be made to the left.
5"
240V / 208V
Junction Box
Location
36"
Typical
Countertop
Height
24"
Allow 11/16"
Overlap Top
of Oven &
Side Edges
of Cutout
28 1/2" MIN.
28 5/8" MAX.
27 1/4" MIN.
27 5/16" MAX.
Top and/or side
fillers may be
necessary if
unit is positioned
between existing
cabinets. Be sure
they are attached
securely since
they will anchor
the oven in the
cabinet.
3/4" Support
Platform
Required
MUST SUPPORT 150 LBS.
22" MIN.
Above
Support
Platform
5 9/16"
Reference dimension
for maximum support height
with typical 36" countertop
height
MUST SUPPORT 150 LBS.
3/4”
Support Platform
Required
25”
5”
24”
Gas and electrical connections for
30”gas cooktop must be located
in an adjacent accessible location
to the right. For 36”gas cooktop,
the connections may be made
to the left.
240V / 208V
Junction Box
Location
36”
Typical
Countertop
Height
22” Min.
Above
Support
Platform
5 9/16”
Reference dimension for
maximum support height with
typical 36”countertop height
Allow 1”overlap
top of oven and
11/16” overlap
side edges of
cutout
Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
Gas or electric cooktops may
be installed over this oven.
See cooktop installation
instructions for cutout size.
See label on top of oven for
approved cooktop models.
28 1/2” Min.
28 5/8” Max.
27 1/4” Min.
27 5/16” Max.

8(Continued on following page)
Installation Instructions
Electrical Connections
ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired) into an approved junction
box. A plug and receptacle is NOT permitted
on these products.
DO NOT shorten the flexible conduit.
The conduit strain relief clamp must be
securely attached to the junction box
and the flexible conduit must be securely
attached to the clamp. If the flexible
conduit will not fit within the clamp, do not
install the oven until a clamp of the proper
size is obtained.
NOTE TO ELECTRICIAN: The 3 power
leads supplied with this appliance are
UL recognized for connection to heavier
gauge household wiring. The insulation
of these 3 leads is rated at temperatures
much higher than the temperature rating
of household wiring. The current carrying
capacity of the conductor is governed
by the wire gauge and the temperature
rating of the insulation around the wire.
Turn off the circuit breaker or remove
fuses to the oven branch circuit.
With the oven supported on a table or
platform in front of the cabinet opening,
connect the flexible conduit to the
electrical junction box as shown below.
Position the conduit in such a manner
that it will lie on top of the oven in
a natural loop when the oven is
installed. You will need to purchase
an appropriate strain relief clamp to
complete the connection of the conduit
to the junction box.
WARNING: Improper
connection of aluminum house
wiring to copper leads can
result in an electrical hazard or fire.
Use only connectors designed for
joining copper to aluminum and follow
the manufacturer’s recommended
procedure closely.
B2
B1
B
Junction Box
Location 5”
Strain Relief Clamp
(not included)
must be used at
Junction Box
BARE
GROUND
WHITE
Place oven on a
support to assist in
connecting conduit
RED
BLACK
Conduit
48 1/2”
long
GROUND
WIRE

9
Installation Instructions
Electrical Connections cont.
B4 Three-Conductor Branch
Circuit Connection
When connecting to a three-conductor branch
circuit, if local codes permit:
a. Connect the bare oven ground conductor
with the crimped neutral (white) lead to
the branch circuit neutral (white or gray
in color), using a wire nut.
b . Connect the oven red lead to the branch
circuit red lead in accordance with local
codes, using a wire nut.
c. Connect the oven black lead to the branch
circuit black lead in accordance with local
codes, using a wire nut. If the residence
red, black or white leads are aluminum
conductors, see WARNING on page 8.
d. Install Junction Box Cover.
B3 New Construction and
Four-Conductor Branch
Circuit Connection
•When installing in new construction, or
•When installing in a mobile home, or
•When installing in a recreational vehicle, or
•When local codes do not permit grounding
through neutral:
a. Cut the neutral (white) lead from the crimp.
Re-strip the neutral (white) lead to expose
the proper length of conductor.
b. Attach the appliance grounding lead (green
or bare copper) in accordance with local
codes. If the residence grounding conductor
is aluminum, see WARNING on page 8.
c. Connect the oven neutral (white) lead to
the branch circuit neutral (white or gray)
in accordance with local codes, using a
wire nut.
d. Connect the oven red lead to the branch
circuit red lead and the oven black lead to
the branch circuit black lead in accordance
with local codes, using wire nuts. If the
residence red, black or white leads are
aluminum conductors, see WARNING on
page 8.
e. Install Junction Box Cover.
B
Ground
Wire
Junction Box
Cover
Junction Box
Cover
Ground and
Neutral Wires

10 (Continued on following page)
WARNING: Mounting
screws must be used. Failure to
do so could result in the oven
falling out of the cabinet causing
serious injury.
Installation Instructions
Securing the Oven in the Opening
Drilling the Pilot Holes and
Mounting the Oven
a. Drill through the mounting holes (top and
bottom) of the side trim, for the #8 screws
provided.
b. Secure the oven to cabinet with screws
provided.
NOTE: If the cabinet is particle board, you
must use #8 x 3/4”particle board screws.
These may be purchased at any hardware
store.
Sliding the Oven Into the
Opening
a. Loop (do not tie) a 36”string around the
conduit before the oven is slid into place.
This will keep the conduit from falling
behind the oven.
b. Lift oven into cabinet cutout using the oven
opening as a grip. Carefully push against
oven front frame. Do not push against
outside edges.
c. As you slide the oven back, pull the string
so that the conduit will lie on top of the
oven in a natural loop.
d. When you are sure the conduit is out of the
way, slide the oven 3/4 way back into the
opening. Remove the string by pulling on
one end of the loop.
NOTE: Before drilling the pilot holes,
make sure the oven is pushed as far
back into the opening as it will go
and centered.
The screws must
be a minimum of
1/4”from the front
of the cutout.
C
C1 C2
Pull out on
string loop
while pushing
the oven into
the cabinet
Mounting
Hole
Locations

11
a. With oven installed, take the bottom trim
and center it on the bottom front edge of
the cabinet opening.
b. Using the trim
as a template,
mark the center
of each slot
(two total) where
the mounting holes
will be drilled.
c. Remove the trim.
d. Drill pilot holes into the center
of each template mark.
Installation Instructions
Installing the Metal
Bottom Trim
IMPORTANT: If this unit is ever
removed from the cabinet or the oven
is ever pulled out for service, the trim
must be removed first or damage to
the trim will occur.
C4
To install a single metal bottom trim assembly (on some models), use sections C3 and C4.
To install a metal bottom trim with a plastic bottom trim (on some models), use sections C3–C5.
Installing the Plastic Bottom
Trim
(on some models)
a. Make sure flat side is up on the plastic
bottom trim.
b. Find the key slot on the back of the trim.
d. Push the trim down, at both ends, until it
snaps securely into place.
c. Match the key slot with the rivet on the
bottom of the side trim, and lower the trim
onto the rivet.
C5
Lower Trim Mounting Rivet
on End of Metal Lower Trim
Key Hole Slot and Wide Flange at Top
Preparing for the Bottom
Trim Installation
C3
Side
Trim
Trim Screws
Side
Trim
Metal Lower Trim CAUTION: Be sure you
do not tip the oven forward
during installation or you may
bend the bottom trim. The bottom trim
provides an opening for cooling air to
enter the cabinet. This opening should
never be blocked.
Remove
Lower Trim
Before
Pre-drilling
Mounting
Holes
With Lower Trim
in Position, Mark
(2) Mounting Hole
Locations
a. Place the bottom metal trim centered over
the pre-drilled mounting holes. Tape the
edges of the trim down to maintain the
alignment.
b. Using two trim screws provided, secure
the bottom trim to the bottom edge of the
cabinet. If a plastic bottom trim is supplied,
proceed to C5.
Push Trim Down at Both Ends
Until it Snaps Securely Into Place

12
Lift the oven door by
placing one hand on
each side. The door is
heavy, so you may need
help. Do not lift the door
by the handle.
With the door at the same angle as
the removal position (half way between
the closed and broil stop position,
seat the notch of the hinge arm into
the bottom edge of the hinge slot.
The notch of the hinge arm must be
fully seated into the bottom of the slot.
Open the oven door as far as it
will open.
Push the hinge locks up against the
front frame of the oven cavity, to the
locked position.
Close the oven door.
Installation Instructions
Replacing the Oven Door
D
NOTE: The oven door is heavy. You
may need help lifting the door high
enough to slide it into the hinge slots.
Do not lift the door by the handle.
D1
D2
D3
D4
D5
Bottom Edge
of Slot
Hinge Arm
Hinge Notch
Notch of Hinge
Securely Fitted
into Bottom of
Hinge Slot
Hinge in
Locked Position

13
Installation Instructions
Remove all protective film, if present,
and any stickers.
Check to be sure that all wiring is
secure and not pinched or in contact
with moving parts.
Pre-Test Checklist
Check that the bottom trim is installed
properly (see page 11).
Check to be sure the mounting screws
are installed and flush with the side trim
(see page 10).
Remove all items from the inside
of the oven.
Check that conduit is securely
connected to the junction box.
Turn on the power to the oven. (Refer
to your Owner’s Manual.) Verify that
the bake and broil units, and all
cooking functions operate properly.
Check that the circuit breaker is not
tripped nor the house fuse blown.
See your Owner’s Manual for
troubleshooting list.
Operation Checklist
NOTE TO ELECTRICIAN: The power
leads supplied with this appliance
are UL recognized for connections
to larger gauge household wiring.
The insulation of these leads is
rated at temperatures much higher
than the temperature rating of
household wiring. The current
carrying capacity of a conductor
is governed by the wire gauge and
also the temperature rating of the
insulation around the wire.
NOTE: ALUMINUM WIRING
A. WARNING: IMPROPER
CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER
LEADS CAN RESULT IN AN
ELECTRICAL HAZARD OR FIRE.
B. Splice copper wires to aluminum
wiring using special connectors
designed and UL approved for
joining copper to aluminum,
and follow the manufacturer’s
recommended connector
procedure closely.
NOTE: Wire used, location and
enclosure of splices, etc., must
conform to good wiring practice
and local codes.

14
NOTES

15
NOTES

16
NOTES