GECKO BRICKS Ghost & Phantom II User manual

Wall Mount Instructions
Ghost & Phantom II –(75357)
Kit contents
•1x Left arm
•1x Right arm
•1x Main back stretcher
•1x Main adaptor slot plate
•1x Adaptor part A
•1x Adaptor part B
•1x Minifigure mount
•1x Minifigure mount lug
•1x Phantom II arm
•1x Phantom II adaptor
•2x Wall plug (6x30mm)
•2x Wall screw (4.5x50mm)
•3x Small Command strip
Ghost wall mount

Wall Mount Instructions
Ghost & Phantom II –(75357)
Partially insert the supplied
technic push pins as shown
You may adjust the angle of the set by
repositioning the angled adaptor
With the adaptor assembly seated
in the Lego set push the 4 included
Techinc pins to secure in place

Wall Mount Instructions
Ghost & Phantom II –(75357)
Slide the Lego ship and adaptor assembly into
the wall mount
You can rotate the set to 8 positions and slide
into the mount
Phantom II wall mount

Wall Mount Instructions
Ghost & Phantom II –(75357)
Attach the Minifigure mount lug to the wall
first
Minifigure wall mount