Gecko GG110008 Dimensions and installation guide

Thank you for purchasing another quality Gecko product.
Introducing Gecko 3 Button Wireless Mouse, pack includes a 3 button
optical mouse with USB receiver to connect wirelessly to your computer
for a wire free workspace.
Features
Wireless optical mouse
The included USB receiver connects to your computer wirelessly for a reliable
connection and a clutter free workspace, and includes inbuilt storage for the
receiver when not in use.
Plug and play compatibility
The Gecko 3 button wireless mouse connects automatically and is ready
to use with no complicated software setup.
Multi surface compatibility
Works on most surfaces, including wood and plastic.
Sleep mode
Automatically powers off to save battery after 3 seconds without use,
simply click once to wake.
Please enjoy.
Yours sincerely
Gecko Team
WARRANTY INFORMATION - FOR AUSTRALIAN CONSUMERS ONLY
Powermove Distribution provides its accessory range of products with a 1
Year back to base warranty:“Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure”.
The warranty offered is in addition to other rights and remedies offered under
consumer law.
The conditions contained in this warranty apply to purchases made within
Australia only.
Purchases made outside of Australia are covered by the warranty procedures
and policies that comply with each respective place of purchase.
Conditions of warranty:
a. The consumer must retain proof of purchase for the warranty period.
b. The warranty period is valid for 1-year from the original purchase date.
c. The warranty applies only to defects in material or workmanship that occur
during normal use of the product.
d. The warranty is a ‘back-to-base’ warranty meaning the consumer is
responsible for the costs associated with returning the product to their place
of purchase or to Powermove Distribution.
e. The consumer must return the goods, original packaging (where feasible)
and proof of purchase to make a warranty claim.
f. If a replacement product is supplied the warranty period applies to the
balance of the warranty period from the original purchase date.
The warranty does not cover:
a. Failure that has occurred as a result of accident, abuse or mis-treatment.
b. Goods that are damaged as a result of other third party products.
c. Any misrepresentations given that are not covered by the warranty.
Warranty claim procedure:
a. The consumer must return the goods as per the requirements stated
in ‘conditions of warranty’ section d & e.
b. If the consumer is unable to return the goods to the place of purchase they
can send the goods with the required packaging and documentation, along
with their contact details including address, phone number and e-mail to:
Warranty Department
Powermove Distribution
28 The Gateway
Broadmeadows, Vic 3047
Ph: 03 9358 5999 Fax: [phone]
E-Mail: [e-mail]
Included in this pack:
3 button wireless mouse
USB receiver
User manual
Technical Specifications:
Wireless frequency: 2.4GHz
Buttons: left, right, scroll wheel
Rated current and voltage: 15mA-3V
Battery: 1 x AA
Working distance: 6-10m
Resolution: 1200dpi
Gecko 3 Button Wireless Mouse
User Manual and Warranty
All registered trademarks, trademarks, brand names or product names are
the property of their respective owners.©2017 Gecko Gear Australia Pty Ltd.
71 Anzac Highway, Ashford, SA, 5035. All Rights Reserved.

Setup instructions
1. Open battery cover and remove the USB receiver.
2. Insert 1 x AA battery, ensuring that the poles are aligned correctly.
3. Insert the USB receiver into the USB port of your computer, the mouse will
automatically detect and connect to the receiver.
Gecko 3 button wireless mouse USB receiver is located inside the battery cavity
Troubleshooting
If your mouse is not working as expected, follow these steps to troubleshoot.
1. Ensure the USB receiver is plugged in correctly to the USB port on your computer
and is detected by the computer.
2. Check the LED battery level indicator and replace battery if the charge is low.
3. Ensure the battery is correctly inserted with correctly aligned poles.
4. Test the USB receiver in a different USB port.
5. To ensure optimal performance, always use the mouse on a clean surface.
6. Some surfaces which reflect light, such as glass, may cause the cursor to move
erratically. If this occurs, use the mouse on a different surface or use a mouse mat.