Gemini GSW-T1500PK User manual

GSW-T1500PK
USER MANUAL
Introduction
Thank you for purchasing our GSW-T1500PK. We are
GEMINI familyofproducts will make your life easier
by using the latest technological advancements in sound repro -
duction and will raise the bar for pro audio products.
Support
At GEMINI, our highest priority is making your experience
unforgettable. Need help with setting up, troubleshooting, or looking
for some tips? We’re here for you, Monday through Friday 9AM to
5PM EST.
1-732-346-0061
www.geminisound.com

2
Index
What’s Included
Power On
EQ
Lighting
Playback from USB
Bluetooth Pairing
Bluetooth Linking
FM Radio
Connect an External Device
Stand Mounting
GSW-T1500PK Features
FCC Compliance Statement
Caution
Precautions
Warranty and Repair
Limited Warranty
Return/Repair
2
3
3
3
3
4
4
4
5
5
6
6
7
7
8
8
8
What ’s Included
included with your GSW-T1500PK speaker:
(1) GSW-T1500PK
(1) Speaker Stand
(1) Wired Microphone
(1) Power Cord
GSW-T1500PK

3
Power On
·Connect power from adaptor to wall and
connection on back of speaker
· Conecte la alimentación del adaptador a la
pared y la conexión en la parte posterior del
altavoz
· Press the power button on the front of
the speaker.
· Presione el botón de encendido en la parte
frontal del altavoz.
·While speaker is connected to power,
it will charge. There is a battery icon
indicating fullness of internal battery.
When it is full charged you can disconnect
from direct power.
·Mientras el altavoz está conectado a la
alimentación, se cargará. Hay un pequeño icono
de batería que indica que la batería está llena.
Cuando está completamente cargada, puede
desconectarse de la alimentación directa.
Bluetooth Pairing
• Press the BLUETOOTH button. The
speaker is now in Bluetooth pairing mode.
• Presione el botón BLUETOOTH. El altavoz
está ahora en modo de emparejamiento
Bluetooth.
• Search for GMN-GSW on your phone
under Bluetooth settings and connect to the
speaker
• Busque GMN-GSW en su teléfono
altavo
• The speaker will play two tones to
indicated that it is now paired with your
phone
• El altavoz reproducirá dos tonos para indicar
que ahora está sincronizado con su teléfono
GSW-T1500PK
GMN-GSW

4
Adjusting Volume
• The MASTER VOLUME controls are
located on the front panel of the speaker.
Press the VOLUME UP button 1 time to
turn the volume up. Press the VOLUME
DOWN button 1 time to turn the volume
down. VL will appear on screen & you can
adjust the levels from 1 to 32
• Los controles MASTER VOLUME están
ubicados en el panel frontal del altavoz.
Presione el botón VOLUME UP 1 vez para
subir el volumen. Presione el botón de BAJAR
VOLUMEN 1 vez para bajar el volumen. VL
aparecerá en la pantalla y puede ajustar los
niveles de 1 a 32
Connecting & Playing
• To connect other input sources –
Mic inputs on the front of the speaker
ii. Connect USB cable to USB Input
iii. Connect Aux cable to Aux input
• Para conectar otras fuentes de entrada -
yo. Abra la tapa frontal para mostrar las entradas
USB, Aux y Mic en la parte frontal del altavoz
ii. Conecte el cable USB a la entrada USB
iii. Conecte el cable auxiliar a la entrada auxiliar
• With the speaker turned on, press the
SOURCE button.
i. Press 1 time for LINE IN MODE
ii. Press 2 times for FM mode
iii. Press 3 times for USB mode
iv. Press 4 times for Bluetooth mode
• Con el altavoz encendido, presione el botón
FUENTE.
yo. Presione 1 vez para LINE IN MODE
ii. Presione 2 veces para el modo FM
iii. Presione 3 veces para el modo USB
iv. Presiona 4 veces para el modo Bluetooth
GSW-T1500PK

5
Beast Mode
• Enable Beast mode by pressing the
BEAST button on the front panel of the
speaker. The word BEAST will pop up
on the LCD Screen. To turn it off, simply
press the button again 1 time
• Active el modo Bestia presionando el botón
BEAST en el panel frontal del altavoz. La
palabra BESTIA aparecerá en la pantalla LCD.
Para apagarlo, simplemente presione el botón
otra vez 1 vez
Controlling Playback
• Locate the PLAY/PAUSE, SKIP AHEAD
and SKIP BACKWARD controls on the
front of the speaker panel. Press the PLAY/
PAUSE button one time to PLAY from
BLUETOOTH, LINE IN or USB sources.
• Localice los controles de REPRODUCIR /
PAUSAR, SALTAR AL AVANCE y SALTAR
ATRÁS en la parte frontal del panel de
altavoces. Presione el botón REPRODUCIR /
PAUSAR una vez para REPRODUCIR desde
BLUETOOTH, LINE IN o fuentes USB
.
• To repeat a track locate the REPEAT 1
button. Press that button 1 time will enable
the current track to be repeated.
• Para repetir una pista localice el botón
REPETIR 1. Presione ese botón 1 vez para que
la pista actual se repita.
• Press the SKIP AHEAD button to
advance to the next track. Press the SKIP
BACKWARD button to return to the
previous track.
• Presione el botón SKIP AHEAD para avanzar
a la siguiente pista. Presione el botón SKIP
BACKWARD para volver a la pista anterior.
• To change radio stations in FM MODE.
Press the SKIP AHEAD button to
increase stations forward. Press the SKIP
BACKWARD button to decrease stations
backward
• Para cambiar emisoras de radio en MODO
FM. Presione el botón SKIP AHEAD para
aumentar las estaciones hacia adelante. Presione
el botón SKIP BACKWARD para disminuir las
estaciones hacia atrás
GSW-T1500PK

6
Equalizer EQ
• The GSW-1500PK has 5 different EQ
settings, NORM, CLUB, VOCL, ROCK, POP.
Located the EQ button. Pressing it 1 time
will change the EQ settings. The display
will indicate what setting you are currently
using.
ecualización diferentes, NORM, CLUB, VOCL,
ROCK, POP. Ubicado el botón EQ. Si lo pulsa
utilizando actualmente.
Bluetooth Linking
• To LINK your speaker to another
GSW-T1500PK, start by pressing the LINK
button. You will hear a set of tones to
indicate that the speaker is now in linking
mode. The word LINK should appear in
the lower left-hand corner of the LCD
screen. Press the LINK button on the other
speaker and you will hear the same tones.
The speakers are now linked.
• Para ENLACE su altavoz a otro GSW-
T1500PK , comience presionando el botón
ENLACE. Escuchará un conjunto de tonos para
indicar que el altavoz está ahora en modo de
enlace. La palabra ENLACE debe aparecer en
la esquina inferior izquierda de la pantalla LCD.
Presione el botón ENLACE en el otro altavoz y
escuchará los mismos tonos. Los altavoces están
ahora vinculados.
GSW-T1500PK
GSW-1500PK

7
Controlling the Lights
• The GSW-T1500PK speaker has 3 light
settings; STEADY FLASHING, FLASHING
TO THE MUSIC, FADE IN/OUT. To
activate STEADY FLASHING, Locate the
LIGHTS button on the front of the LCD
display. Press 1 time to turn lights on
mode. Press 3 times to activate fade in/out
mode. Press 4 times to turn off lights.
de luz; FLASHING DE SEGURIDAD,
INTERMITENTE A LA MÚSICA, FADE IN
/ OUT. Para activar STEADY FLASHING,
ubique el botón LIGHTS en la parte frontal de
la pantalla LCD. Presione 1 vez para encender
las luces y activar el modo de destello continuo.
Presione 2 veces para encender el modo de
música intermitente. Presione 3 veces para
activar el modo de entrada / salida de fundido.
Presione 4 veces para apagar las luces.
• The GSW-T1500PK speaker has 12 different
light colors. To change colors, Locate the
COLOR button. Each time you press the
button it will change the color of the lights
in the speaker
• El altavoz GSW-T1500PK tiene 12 colo res de luz
diferentes. Para cambiar los colores, busque el
botón COLOR. Cada vez que presione el botón
cambiará el color de las luces en el altavoz
Connecting & Controlling the Mic
• To connect a microphone to your
GSW-T1500PK speaker. Locate the front
input connection panel on the front of
the speaker. Open the rubber panel door.
Connect microphone cable to input labeled
MIC.
• Para conectar un micrófono a su altavoz
GSW-T1500PK. Localice el panel de conexión de
entrada frontal en la parte frontal del altavoz.
Abra la puerta del panel de goma. Conecte el
cable del micrófono a la entrada etiquetada MIC.
•To control the microphone volume, locate
the MIC - and VOL+ buttons on the front
panel of the speaker. Press the VOL +
button 1 time to increase the microphone
volume. Press the MIC – button 1 time to
decrease the microphone volume.
• Para controlar el volumen del micrófono,
ubique los botones MIC y VOL + en el panel
frontal del altavoz. Presione el botón VOL + 1
vez para aumentar el volumen del micrófono.
Presione el botón MIC - una vez para disminuir
el volumen del micrófono.
GSW-T1500PK
GSW-T1500PK

8
Responsible Party Name:
Innovative Concepts & Design
Company address:
458 Florida Grove Road Perth
Amboy, NJ 08861，USA
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
The operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2( This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These equipment
generates uses and can radiate radio frequency energy
and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause interference to radio or
television reception, which can be determined by turning
the equipment off and then on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to a different outlet so that the
equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC ID: 2AE6G-ALP-1500
GSW-T1500PK Features
1. Power ON/OFF Switch: Turns the unit on and off
2. Volume Up: Turns the main volume up
3. Volume Down: Turns the volume down
4. Beast: Turns on and off Beast Mode
5. Skip Ahead: Moves track ahead on Bluetooth/USB
mode and moves the radio station forward on FM mode
6. Play/Pause: Starts and Stops music Bluetooth/
USB mode
7. Skip Backwards: Moves 1 track backwards on
Bluetooth/USB mode and moves the radio station
backwards on FM mode
8. EQ: Switches between equalizer settings
9. Source: Switches between input sources
10. Track Repeat: Repeats the current track in Blue-
tooth/USB modes.
11. Link: Initiates Bluetooth Linking
12. Bluetooth: Activates Bluetooth Pairing
13. Lights: Turns on/off and activates different light
modes
14. Color: Changes the colors of lights on speaker
15. Mic Vol Up: Increases the Microphone volume
16. Mic Vol Down: Decreases the Microphone volume
17. Aux Input: Attach aux input here
18. Microphone Input: Attach microphone input here
19. USB Input: Plug in USB input here
20. Link Out: To connect output to another source
21. DC IN: Plug in power source.
4
7
12
17
5
8
13
19
6
9
14
10
15
16
11
3
2
1
18
20
21
GSW-T1500PK

9
Caution
• All operating instructions should be read before using
this equipment.
• To reduce the risk of electrical shock, do not open the
unit. There are no user replaceable parts inside.
technician. Do not attempt to return this equipment to
your dealer.
• Do not expose this unit to direct sunlight or to a heat
source such as a radiator or stove.
• This unit should be cleaned only with a damp cloth.
Avoid solvents or other cleaning detergents.
• When moving this equipment, it should be placed in its
original carton and packaging. This will reduce the risk
of damage during transit.
• Do not expose this unit to water or heat.
• Do not use cleaning products or lubricants on
the controls or switches.
Precautions
Please read carefully before proceeding:
Always follow the basic precautions listed below to avoid
the possibility of serious injury or even death from electrical
• Please read, follow, and keep all instructions before using
this product.
• Cleaning: The product should be cleaned only with a
polishing cloth or a soft dry cloth.
Never clean with furniture wax, benzene, or other
volatile liquids since they may corrode the cabinet.
• Water and Moisture: Do not use this product near
water, for example, near a bathtub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swim-
ming pool; and the like.
• Do Not Open: Do not open the device or attempt to
disassemble the internal parts or modify them in any
way. The device contains no user- serviceable parts. If
it should appear to be malfunctioning, discontinue use
Gemini service personnel.
• Replacement Parts: When replacement parts are
required, be sure the service technician has used replace-
same characteristics as the original part. Unauthorized
hazards.
• Location: If you use a stand, check the stand’s
support the weight of the speaker. You may need to limit
the number of people around the placed stand, to avoid
toppling the device or causing damage to the internal
components. Also, be sure to keep the following cautions.
– Use the speaker stands with their legs fully opened.
– Mount only one speaker on each speaker stand.
– Tighten fastening screws securely.
– Remove the speakers from the stands before moving
the stands or adjusting their height.
– Add weight such as sand bags around the stand legs to
prevent them from falling over.
– Use the stand, maximum height of 140cm (55”).
– If you use the socket of a subwoofer to allow
mounting of a satellite speaker, use a pole 100cm max.
with an outer diameter of 35mm (1-3/8”).
– When carrying the device, always use two or more
people.
– Before moving the unit, remove all plugged cables.
– Do not use the speaker’s handles for suspended
installation. Doing so can result in damage or injury.
– Do not expose the device to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater) to prevent the possibility of panel
– Do not place the device in an unstable position where
it may accidentally fall over.
• Rigging Safety: The GSW-T1500PK Rigging System’s
provisions for use require that it be installed in accor-
installation:
– Ensure that points where you
have chosen to mount (for example
a chain hoist) on the stage roof or
venues ceiling comply with accident
prevention and that the safety
them for the full load.
– Inspect all components to
ensure they are in good working
order, taking care that all
tracks, trusses and connecting
undamaged.
operating manual! Be sure to protect
cabinets against rain and moisture
when they are deployed outdoors.
– If parts of the load-
bearing equipment have
been deformed, it is up
to the manufacturer to
determine if they are
repairable.
The principle requirement for safe
handling and trouble-free operation of this rigging
system is a thorough understanding of fundamental
operating safety and safety regulations. This operating
manual contains the most vital instructions concerning
the safe operation of the enclosures.
• Connections: Before connecting the device to other
devices, turn off the power for all devices. Before turning
the power on or off for all devices, set all volume levels
to minimum.
GSW-T1500PK
Gemini

10
Limited Warranty
A. Gemini guarantees its products to be free from defects in materials and workmanship for
one (1) year from the original purchase date.
B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use,
faulty installation, improper maintenance or any repairs other than those provided by Gemini.
C. There are no obligations of liability on the part of Gemini for consequential damages arising
out of or in connection with the use or performance of the product or other indirect damages with
implied warranties for Gemini ,
one (1) year from the original date of purchase, unless otherwise mandated by local statutes.
Return/Repair
A. In the U.S.A., please call our helpful Customer Service Representatives at 732-346-0061, and they
will be happy to give you a Return Authorization Number (RA#) and the address of an authorized
service center closest to you.
B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a
description of the defect. Send by insured freight to: Gemini and use the address provided by your
customer service representative. Your RA# must be written on the outside of the package, or processing
C. Service covered under warranty will be paid for by Gemini and returned to you. For non-war -
rantied products, Gemini will repair your unit after payment is received. Repair charges do not
include return freight. Freight charges will be added to the repair charges.
D. On warranty service, you pay for shipping to Gemini,we pay for return shipping within the
continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will
be charged for freight.
E. Please allow 2-3 weeks for return of your product. Under normal circumstances your product will
spend no more than 10 working days at Gemini. We are not responsible for shipping times.
Parts of the design of this product may be protected by worldwide patents. Information in this manual
is subject to change without notice and does not represent a commitment on the part of the vendor.
Gemini shall not be liable for any loss or damage whatsoever arising from the use of information
or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical,
including photocopying and recording, for any purpose without the express written permission of Gemini.
It is recommended that all maintenance and service on this product is performed by Gemini or its
authorized agents. Gemini will not accept liability for loss or damage caused by maintenance or
repair performed by unauthorized personnel.
Warranty and Repair
All Gemini products are designed and manufactured to the highest standards in the industry.
With proper care and maintenance, your product will provide years of reliable service.
GSW-T1500PK