Gemmy Airblown Inflatable 224397 User manual

IMPORTANT SAFETY
INSTRUCTIONS
BASIC PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED WHEN USING ELECTRICAL PRODUCTS,
INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
• This is an electrical product - not a toy! To avoid risk of
fire, burns, personal injury, and electric shock, it should
not be played with or placed where small children can
reach it.
• Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
• This seasonal use product is not intended for permanent
installation or use.
• Do not mount or place near gas or electric heaters,
replaces, candles, or other similar sources of heat.
• Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
• Do not use this product for other than its intended
purpose.
• Do not hang ornaments or other objects from cord, wire,
or light string.
• Do not close doors or windows on the product, or
extension cords, as this may damage the wire insulation.
• Do not cover the product with a cloth, paper, or any
material not part of the product when in use.
• Do not place the product against carpeting, furniture, or
any other fabric when in use.
• This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of electric
shock. This plug will t in a polarized outlet only one way.
If the plug does not t fully in the outlet, reverse the plug.
If the plug still does not t, contact a qualied electrician.
Do not use an extension cord unless the plug can be fully
inserted. Do not alter or replace the plug.
Safety Information
224937-CE • This product employs overload protection (fuse). A blown
fuse indicates an overload or a short-circuit condition. If
the fuse blows, unplug the product from the outlet. Also
unplug any additional string or products that may be
attached to the product. Replace the fuse as per the user
servicing instructions (follow product markings for proper
fuse rating) and check the product. If replacement fuse
blows, a short-circuit may be present and the product
should be discarded.
• Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE
INSTRUCTIONS
USE AND CARE
INSTRUCTION
1. When the product is placed on a live tree, the tree should
be well maintained and fresh. Do not place on live trees
in which the needles are brown or break off easily. Keep
the tree holder lled with water.
2. If the product is placed on a tree, the tree should be well
secured and stable.
3. Before using and reusing, inspect the product carefully.
Discard any products that have cut, damaged or frayed
wire insulation cords, cracks, lamp holders or enclosures,
loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product
from wherever it is placed, including trees, branches,
or bushes, to avoid any undue strain or stress on the
product conductors, connections and wires.
5. When not in use, store neatly in a cool, dry location
protected from sunlight.
To reduce the risk of re and electric shock:
1. Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal and.
2. Do not mount or support wires in a manner that can cut
or damage wire insulation.
CAUTION: Do not attempt to inflate this unit
during unusually strong winds. If it becomes too windy for
safe operation, allow the unit to deate and wait for safer
conditions.
CAUTION: Do not connect to another lighting
string, decorative outfit, or seasonal product. To reduce
the risk of fire do not deliberately reposition either lamp
holder contact.
Do not attempt to inflate your Animated AirblownTM In-
flatable during unusually strong winds. If it becomes too
windy for safe operation, simply allow your Animated Air-
blownTM Inatable to deate and wait for better conditions
before re-inating.
Protect the electric fan and power cord from direct expo-
sure to water. This precaution will reduce the risk of elec-
trical shock. When the temperature is below 14° F (-10°
C), the motor may temporarily stop running. The motor will
begin functioning again higher temperatures.
WARNING
Remove all plastic fasteners and tags. These are part of
the packaging and should be discarded.
This item is not a toy and should be used for decorative
purposes only.
For indoor and outdoor use.
120 V 60 Hz.
CAUTION
1. For temporary (90 days max) installation and use only.
2. To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
3. Disconnect power before replacing the fuse.
4. To reduce the risk of fire or electric shock, do not at-
tempt to replace lamps or modify wiring or product.
5 Do not place near standing areas of water, such as
ponds and pools.
6. To reduce the likelihood of excessive heat and possible
damage, use only decorative lamp accessories pac-
kaged with this product or marked for use with this pro-
duct.
WARNING: READ AND
UNDERSTAND ALL
INSTRUCTIONS.
Failure to follow all instructions listed below, may result in
electric shock, re and/or serious personal injury.
WARNING:
ELECTRIC PRODUCT. Keep away from children. As with
all electrical products, precautions should be observed du-
ring handling and use to reduce the risk of electric shock. If
the supply cord is damaged, it must be replaced by the ma-
nufacturer, its service agent or similarly qualified persons
in order to avoid a hazard. To avoid the risk of electrical
shock, always make sure the figure is unplugged from the
electrical outlet before assembling, disassembling, or relo-
cating.
This product is to be assembled by adults only.
TM

FREQUENTLY ASKED
QUESTIONS (FAQ’s)
1. Can I continually run my Animated AirblownTM
Inatable?
Yes, you can run your Animated AirblownTM Inatable
during the day and at night. We recommend that you
turn off your Animated AirblownTM Inatable when
leaving the immediate area and when retiring for the
evening. Otherwise, your Animated AirblownTM Inatable
is designed to run continually as you see t.
2. What happens if my Animated AirblownTM Inatable
becomes torn?
Rips in the Animated AirblownTM Inatable can be sewn
by hand (no special thread is required) or taped with
clear packing tape.
3. How can I clean my Animated AirblownTM Inatable?
Wipe clean with a damp cloth and allow to dry before
storing away. Use mild detergent if necessary.
4. When I unplug my Animated AirblownTM Inatable,
it deates. Why is this?
Your Animated AirblownTM Inatable will not stay inated
unless it is plugged in and the fan is blowing air.
5. My Animated AirblownTM Inatable isn’t moving.
What can I do?
It is possible for the action components within your
Animated AirblownTM Inatable to become slightly
tangled. If there is no action, attempt to straighten your
Animated AirblownTM Inatable to remove wrinkles and
folds. Also, re-check all zippers to insure they are fully
closed. Lastly, recheck the outlet, unplug and plug in
again to insure it is properly plugged in. If this does
not work, please contact Gemmy’s Customer Service
Department.
6. How much electricity does an Animated AirblownTM
Inatable consume?
Please refer to the electrical approval label for wattage.
7. What is the best way to store my Animated
AirblownTM Inatable?
CAUTION
Fuse Replacement
WARNING: Risk of Fire:
Replace only with same size and type
of fuse. Do not replace the attachment
plug. Contains a safety device (fuse)
that should not be removed. Discard
product if attachment plug is damaged.
1. Grasp plug and remove from the
receptacle or other outlet device. Do
not unplug by pulling on the cord.
2. Open fuse cover. Slide open the fuse
access cover on top of the attachment plug towards
blades. (See illustration)
3. Remove fuse carefully.
4. Replace fuse only with 5 Amp Max, 125 Volt (provided
with product).
5. Close the fuse cover. Slide closed the fuse access cover
on top of the attachment plug.
Store in a bag, box or other storage container and keep
in a cool, dry location.
8. Can I leave my Animated AirblownTM up in extreme
weather conditions or freezing temperatures?
We do recommend the consumer take appropriate
precautions to protect the unit. The Animated
AirblownTM will operate at temperatures below freezing,
but we do not recommend operating the Animated
AirblownTM if temperatures drop below 14° F (-10° C).
9. What if it is raining or snowing? Will this affect my
Animated AirblownTM?
Operation of your Animated AirblownTM during light
weather conditions, such as a gentle rain or snowfall is
recommended. However, operation of your Animated
AirblownTM during extreme weather conditions is not
recommended, as your item may become damaged
or inundated with moisture. Do not store the Animated
AirblownTM when it is wet.
10. What if water has soaked my unit while unplugged?
Move the unit to a dry location and plug in the unit. The
fan will dry the Animated AirblownTM.
11. My Animated AirblownTM has been deated and it
is covered with snow. Can I simply re-inate it?
If your Animated AirblownTM is covered in a light dusting
of snow, simple re-ination should not harm the unit.
However, if the deated unit has been subjected to a
large amount of snow and/or ice, do NOT attempt to
re-inate. Rather, carefully remove the item from the
extreme condition (i.e. bring it indoors) and allow the
unit to thaw before re-inating. This helps prevent
cracks and/or tears in the materials.
12. What if it’s raining or snowing? Will this affect my
Animated AirblownTM?
Operation of your Animated AirblownTM during light
weather conditions, such as a gentle rain or light
snowfall is ne. However, operation of your Animated
AirblownTM during extreme weather conditions such as
heavy snow, rain or windstorms is not recommended
as it may become over-weighted and damage the unit.
13. I have stored my Animated AirblownTM Inatable
for several months and now the motor does not
work?
Sometimes the air intake may be blocked by loose
grass/leaves or other particles. Gently shake, knock or
tap the motor and see if it will operate again.
WARNING: CAN ICES-005(B)/NMB-005(B)
These Instructions Are For These Items
224397 224393
TROUBLE SHOOTING
CHECKLIST
If your Animated AirblownTM Inatable is not inating, the
problem may be.
1. The power source is disabled or the cord may be
unplugged.
2. Debris may be lodged in the motor.
3. The zipper may not be securely fastened, sealing the
Animated AirblownTM Inatable.
4. The temperature may be below 14° F (-10° C).
NOTE: ONCE FAN IS UNPLUGGED AND STOPS
BLOWING, YOUR Animated AirblownTM Inatable WILL
DEFL ATE.

Assembly Instructions
x1 x4 x4 x4 x1
Package Contents
Ensure the four clips on the bottom
of the fabric of the inatable (A) are
attached to the plastic legs on the
base of the intlatable.
Ensure that the air intake on the
inatable (A) unit is clear of fabric and
other obstructions and that the zipper
is fully closed. Some inatables have
more than one zipper.
Turn the inatable (A) upright and insert
four base stakes (B) through the holes
of the plastic legs into the ground.
Plug in the inatable (A) into an outlet
or other power source to inate.
Once fully inated, clip the nylon tethers
(C) to each of the attached nylon loops
on the side of the inatable (A).
Drive the stakes (D) into ground at a
45-degree angle.
AB
1
For maximum stability bring tether down
to a 45-degree angle from the inatable
as shown in the illustration. In order to
achieve this you may need to wrap the
excess tether around the top of the stake.
23
4 5
78
A
A
A
A
B
C
A
D
45°
DE
Visit WWW.GEMMY.COM for more information.
©2019 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 [phone]
MADE IN CHINA / PRINTED IN CHINA
Using the loop at the end of the tether
(C), fasten the tehters to the tether
stakes(D).
6
D
C
Do’s and Don’ts
1. Do check your inatable daily and adjust
to stand up straight.
2. Do not attempt to operate your inatable
in unusually strong winds.(see caution)
3. Do not unplug by pulling on cord.
For faster deation, unzip zipper after
unplugging plug.
9
C
1.) For temporary (90 days max) installation and use only. 2.) This is an
electric product — not a toy! To avoid risk of fire, burns, personal injury
and electric shock it should not be played with or placed where small
children can reach i t. 3.) Use only 125-volt fuse, 5 a mp. max. 4.) To
prevent electric shock, match wide blade of plug to wide slot, fully insert.
5.) Disconnect power before replacing the fuse. 6.) To reduce the risk of
fire or electric shock, do not attempt to replace lamps or modify wiring or
product. 7) Do not place near standing areas of water, such as ponds
and pools. 8.) To reduce the likelihood of excessive heat and possible
damage, use only decorative l amp accessories packaged w ith this
product or marked for use with this product.
CAUTION: