GemOro 2257 User manual

HORIZON®LED
Natural Daylight Task Lamp
e definitive ource fo lighting.

GemOro Products 2 Horizon LED 3
Item # 2257
INSTRUCTIONS FOR USE
& SAFETY PRECAUTIONS
Congratulations on your purchase of the Horizon LED,
the ultimate natural daylight task lamp from GemOro! It
features amazing super bright, high-power, natural daylight
LED’s that have been shown to improve color acuity,
productivity and health. The Horizon LED provides the best
lighting for many applications, including: diamond color
grading, jewelry display, stamp, coin and art collecting,
executive desks, bedside tables, reading and more.
SPECIFICATIONS
Model: Horizon LED
Output Voltage: DC24V
Output Amperage: 240mA
Power: 8W
FEATURES
• 6,000K Full Spectrum Natural Daylight Illumination
• High-Power Long Life LED Technology
• Sleek, Modern Ergonomic Design
• Electronic Membrane Touch Sensor Power Switch
• Dimmable Light Intensity
• Flex-Arm & Swivel Provide Fully Adjustable Light Angle
• 100V-240V Multi-Voltage UL Listed Adapter
• USB Power Port for Recharging Smartphone’s, iPod’s, etc.
• Heavy Weighted Base
Lamp Shade
Flex Arm
Heavy
Weighted
Base
DC Socket
USB Socket
Angle Adjustment
Tightness
Screw
Cap
6,000K Natural Daylight LED’s
Electronic Membrane
Touch Sensor Power
Switch & Dimmer

GemOro Products 4 Horizon LED 5
ASSEMBLY INSTRUCTIONS
1. Remove screw cap from lamp flex arm
by turning it counter clockwise.
2. Insert screw cap in the hole from the
bottom of the lamp base.
3. Insert threaded end of lamp arm into the top of the lamp
base so that the threads align with the screw cap.
4. While holding the screw cap steady, turn the lamp
arm clockwise while screwing it into the cap. A coin
may be used for leverage while screwing the cap in.

GemOro Products 6 Horizon LED 7
OPERATING INSTRUCTIONS
1. Locate the DC socket on the backside on the
lamps arm near where it attaches to the weighted
base and insert the AC adapter plug.
2. Plug the other end of the AC adapter
into a suitable wall power outlet.
3. Touch the chrome electronic membrane touch sensor power
switch at the base of the arm to power the lamp on and
off. To activate the dimming feature and adjust the light
intensity, simply touch and continue pressing this switch
down until the desired brightness level has been achieved.
4. Adjust lamp’s flex arm to optimally position the light angle.
5. Locate the USB socket power port on the side of the
lamps flex arm near where it attaches to the heavy
weighted base and as needed plug in an appropriate
USB power cord to charge Smartphone’s, iPod’s, etc.
WARRANTY
Your Horizon LED features a One Year Limited Warranty. The
warranty period begins on the date that your Horizon LED is
purchased, as noted on the bill of sale (if supplied) or through
the Horizon LED serial number tracking system, as interpreted
by the factory (the “Warranty Commencement Date”). The One
Year Limited Warranty begins on the Warranty Commencement
Date and expires 365 days thereafter (the “One Year Limited
Warranty Period”). During the One Year Warranty Period, the
Horizon LED is warranted against defects in materials and
workmanship under normal and intended use as determined by
the factory. No warranty, of any kind or character, exists after
the expiration of the One Year Limited Warranty Period. If a
defect exists, at its option GemOro will (1) repair the product
at no charge, using new or refurbished replacement parts, (2)
exchange the product with a product that is new or which
has been manufactured from new or serviceable used parts
and is at least functionally equivalent to the original product,
(3) in the event the Horizon LED is no longer available or has
been discontinued and warranty coverage is applicable, at the
factory’s sole discretion, a substantially equivalent task lamp
may be substituted in place of the defective Horizon LED or
(4) refund the purchase price of the product. When a product
or part is exchanged, any replacement item becomes your
property and the replaced item becomes GemOro’s property.
If and when a refund is given, your product becomes GemOro’s
property. The purchaser shall incur the cost for return postage,
insurance and handling for all warranty and non-warranty
repairs.

GemOro Products 8 Horizon LED 9
GemOro Horizon LED
WARRANTY REGISTRATION
10455 Olympic Drive, Dallas, Texas 75220 USA
Tel [phone] or 214.351.0380
Fax [phone] or 214.351.1903
Website: www.gemoroproducts.com
Email: [e-mail]
Warranty Registration:
www.gemoroproducts.com/warrantyregistration/
This warranty does not apply to: (a) damage caused by
accident, abuse, misuse, misapplication, or non-GemOro
products; (b) damage caused by service (including
upgrades and expansions) performed by anyone who is
not a GemOro authorized service provider; (c) a product
or a part that has been modified without the written
permission of GemOro; or (d) any GemOro product
whose serial number has been removed or defaced.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED. GEMORO SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IF GEMORO CANNOT
LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS
LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE
DURATION OF THE ONE YEAR WARRANTY PERIOD. NO
GEMORO RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED
TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO
THIS WARRANTY.
GEMORO IS NOT RESPONSIBLE FOR DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM ANY BREACH OF WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, AND
DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND
PROPERTY.

10455 Olympic Drive,
Dallas, Texas 75220 USA
Tel [phone] or 214.351.0380
Fax [phone] or 214.351.1903
www.gemoroproducts.com
[e-mail]