Genelec RAM2-405 RM2 User manual

RAM2-405 RM2 Rack Mount Kit
1
2
3
4
Installation
The required space for the RM2 Rack
Mount is 4U in a well ventilated 19” equip-
ment rack.
Attach the rack mount main chassis (1)
and front frame (2) to the rack with suit-
able screws. Leave the screws slightly
loose to allow moving the parts.
Connect the cabling to the RAM2 or
RAM3 amplifier module and attach it to
the rack mount with two M4 screws pro-
vided. The adapter can take up to eight
RAM2 or RAM3 modules. A single blank-
ing plate is included with each RM2 (item
4 in diagram). If needed, additional blank-
ing plates can be purchased (order code
272–0031). Finally, tighten the screws
binding the adapter to the rack. The instal-
lation is now complete.
Genelec Document D0064R003b Copyright Genelec Oy 12.2008. All data subject to change without prior notice
www.genelec.com
International enquiries:
Genelec, Olvitie 5
FIN-74100, Iisalmi, Finland
Phone [phone]
Fax [phone]
Email [email protected]
In the U.S. please contact:
Genelec, Inc., 7 Tech Circle
Natick, MA 01760, USA
Phone [phone]
Fax [phone]
Email [email protected]
In Sweden please contact
Genelec Sverige
Ellipsvägen 10B
P.O. Box 5521, S-141 05 Huddinge
Phone [phone]
Fax [phone]
Email [email protected]
In China please contact:
Beijing Genelec Audio Co. Ltd.
Jianwai SOHO, Tower 12, Room 3304
39 East 3rd Ring Road
Chaoyang District
Beijing 100022, China
Phone [phone], Fax [phone]