Genelec 6010A User manual

The Genelec 6010A is a very compact
two-way active loudspeaker designed for
computer sound systems and other close
proximity listening applications. Its small
size, amazing sound quality and rugged
construction make the 6010A an ideal
portable sound system for the travelling
professional user and a constant source
of enjoyment for active free time.
Designed as an active loudspeaker, the
6010A contains drivers, power amplifiers,
active crossover filters and protection cir-
cuitry. The 6010A excels in applications
where space is at a premium, taking full
advantage of the innovations and uncon-
ventional design features created by Gen-
elec’s R&D team.
The all-aluminium Minimum Diffrac-
tion Enclosure™ (MDE™) and advanced
Directivity Control Waveguide™ (DCW™)
technologies are carefully matched with
advanced amplifier and electronics cir-
cuitry and the latest drivers. Bass response
extends down to 73 Hz (-3 dB) while dis-
tortion is exceptionally
low due to a uniquely
new rear reflex port
design. The system's
excellent directivity
characteristics and
accurate imaging
together with its com-
pact size and flex-
ible mounting options
make the 6010A the
perfect loudspeaker
for a wide range of applications.
As the amplifiers are integrated into the
loudspeaker enclosure, the only connec-
tions required are the mains supply and
the line level input signal, making the
6010A very easy to set up and use. The
integrated design allows the amplifiers and
the drivers to be calibrated as a single unit
in the factory. This eliminates the effects of
component tolerances and ensures con-
sistent quality. The cast aluminium cabinet
has rounded corners and a hard-wearing
painted outer surface available in black,
white or silver finish.
The high frequency driver is a 19 mm (3/4")
metal dome. Uniform dispersion control is
achieved with the revolutionary DCW™
technology pioneered by Genelec, which
has also resulted in improved phase and
delay uniformity at the crossover frequency.
The bass frequencies are reproduced
by a 76 mm (3") driver.
Both drivers have neodymium magnets,
which cause minimal magnetic stray field,
making the 6010A safe to use near sensi-
tive graphical displays. The drivers are also
protected against thermal overload.
The amplifier unit contains an active
crossover. This is the ideal method for
dividing the input signal between the
driver units, allowing the overall response
of the system to be optimized to an extent
impossible with a passive system. Distor-
tions and losses inherent in a high level
passive crossover are also avoided. An
RCA line level input connector provides
easy connection to a preamplifier, com-
puter sound card or a portable MP3 player.
The active crossover controls 'Desktop
Control' and 'Bass Tilt' allow the 6010A to
be exactly matched to any application.
The amplifier unit is built into the
loudspeaker enclosure. The bass and
treble amplifiers each produce 12 watts
of output power. The fast, low distortion
amplifiers are capable of driving a stereo
pair to peak output sound pressure levels
in excess of 102 dB at 1 m. Automatic
thermal overload protection ensures reli-
able operation of the amplifier in all situ-
ations.
A combination of five 6010A’s and the
matching Genelec 5040A subwoofer can
create a dynamic and detailed sound-
stage like no other loudspeaker system
of the same size category. Contact your
local Genelec dealer for an audition and
see Genelec’s website www.genelec.com
for more information of Genelec’s loud-
speaker line.
Genelec 6010A
Active Loudspeaker
Data Sheet
6010A

6010A Data Sheet
Genelec Document BBA0074001. Copyright Genelec Oy 1.2008. All data subject to change without prior notice
International enquiries:
Genelec, Olvitie 5
FIN-74100, Iisalmi, Finland
Phone [phone]
Fax [phone]
Email [email protected]
In the U.S. please contact:
Genelec, Inc., 7 Tech Circle
Natick, MA 01760, U.S.A.
Phone [phone]
Fax [phone]
Email [email protected]
In China please contact:
Genelec China Representative Office
SOHO New Town, 88 Jianguo Road
D-1504, Chaoyang District
Beijing 100022, China
Phone [phone]
Fax [phone]
Amplifier Section
SyStem SpecificAtionS
6010A
Lower cut-off frequency, –3 dB < 73 Hz
Upper cut-off frequency, –3 dB > 21 kHz
Free field frequency response 74 Hz – 18 kHz (± 2.5 dB)
Maximum short term sine wave acoustic
output on axis in half space, averaged from
100 Hz to 3 kHz
@ 1 m > 93 dB SPL93 dB SPLdB SPL
@ 0.5 m > 99 dB SPL99 dB SPLdB SPL
Maximum long term RMS acoustic output
in same conditions with IEC weighted noise
(limited by driver unit protection circuit
@ 1 m > 91 dB SPL
Maximum peak acoustic output per pair with
music material
@ 1 m > 102 dB SPL
Self generated noise level in half space at 1 m
on axis (A-weighted)
< 5 dB
Harmonic distortion at 80 dB SPL
at 1 m on axis
Freq: 70…400 Hz
> 400 Hz> 400 Hz
< 3%
< 0.5 %
Drivers
Bass
Treble
76 mm (3") cone
19 mm (3/4") metal dome
Weight 1,4 kg (3.1 lb)
Dimensions
Height including Iso-Pod™ table stand
Height without Iso-Pod™ table stand
Width
Depth
195 mm (711/16”)
181 mm (71/8”)
121 mm (43/4")
114 mm (41/2”)
6010A
Bass amplifier short term output power
Treble amplifier short term output power
(Long term output power is limited by driver
unit protection circuitry)
12 W at 8 Ohm load8 Ohm load
12 W at 8 Ohm load8 Ohm load
Amplifier system THD at nominal output < 0.08 %
Mains voltage 100, 120, 220 or 230 V
Power consumption (average)
Idle
Full output
5 VA
35 VA
croSSoVer Section
6010A
Signal input connector
RCA female, unbalanced 10 kOhm pin +, ring gnd
Input level for 90 dB SPL output at 1 m -6 dBu at volume
control max
Sensitivity control range -12 dB relative to
max output
Crossover frequency, Bass/Treble 3.0 kHz
Desktop control operating range 0 to –4 dB @ 200 Hz
Bass Tilt control operating range in –2 dB
steps
From 0 to -6 dB @ 100 Hz
The ‘CAL’ position is with all tone controls set to ‘off’ and the input sensitivity
control to maximum (fully clockwise).
www.genelec.com
In Sweden please contact
Genelec Sverige
Ellipsvägen 10B
P.O. Box 5521, S-141 05 Huddinge
Phone [phone]
Fax [phone]
Email [email protected]