General Security MTX590HQICR Series User manual

MTX590HQICR Series Color
Camera
Weatherproof Day&Night IR Color
Camera
Specification
Model MTX590HQICR
Pick Up Element SONY 1/3″CCD
Effective Picture
Elements ( H*V ) NTSC:768×494, PAL:752×582
Horizontal Resolution 540 TV Lines
S/N Ratio
Clock Frequency (MHZ) NTSC:28.636 , PAL:28.375
Scanning System 2:1 interlace
Minimum Illumination 0 Lux (with IR LED ON)
Synchronous System Internal, Negative sync.
Auto Electronic Shutter NTSC:1/60s~1/100,000s,PAL:1/50s~1/100,000s
Gamma Characteristic 0.45
Video Output 1Vpp,75 Ω
Auto Gain Control Auto
Power/Current 12VDC(±10%)/ 700mA
Lens ICR 4-9mm Manual Zoom Lens
Dimension (mm) 259(W)×159(H)×104(D)
Weight (g) 1500
Storage Temperature -30~ +60℃RH95% Max
Operating Temperature -20~ +50℃RH95% Max
More than 48dB
IR Distance Up to 50 Meters (with 36 Unit Infrared LED)
IR Status Under 10 Lux by CDS
IR Power On CDS Auto Control
Water Resistance IP66
Packing List
No Name Model Number
2. User Guide MTX590HQICR
Series
1
1. WeatherProof Day&Night IR Camera MTX590HQICR 1
Notes:Before providing power for the
camera, please read this UserGuide in
detail!
Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.
www.generalsecurity.ro

INTRODUCTION
Congratulations on your purchase of this product.
This UserGuide suits MTX590HQICR series product. We
adopt the latest SONY technical of sensor and driver. The
most attractive characteristics are water-resistant, and
widely applicable to day & night, indoor & outdoor. In
addition, it owns the characters of high definition and
stability, strong anti-jamming, rich and real color. Fixing
and using this model are convenient too. It is very good
for you to apply to yours CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
* Sensor (CCD)
Adopt SONY 1/3" High Resolution CCD sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
* Gamma Characteristic
Camera Gamma characteristic is 0.45.
* Scanning Mode
NTSC or PAL mode.
* Night-time Vision
0 Lux with IR LED ON. Adopt TaiWan high quality IR
LED, having very good night-vision effect.
DC12V Power Supply
Monitor
MTX590HQICR
TROUBLE AND SOLUTION
Link wire rule：
Power
Video
Note:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -20℃--50℃.
(Recommendatory operating temperature is –15℃--50℃.)
● Never make the camera face the sun or bright object.
Otherwise, it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
into water too long time directly.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.
The knobs and screws of the camera must
be retightened with a crosshead driver
after adjusting its focus,
otherwise it would suffer a leak
Notes：
●The power supply must through safe attestation. Its output
voltage、current、voltage polarity and operating temperature must
match the camera’s requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
●The knobs and screws of the camera must be retightened
with a crosshead driver after adjusting its focus,
otherwise it would suffer a leak