GENIO SMART RSH-WB009-9W User manual

Product Setup
Guide
Product Name: Smart Lights
Product Code: RSH-WB009-9W CCT

a. Read device manual and reset
the device so that it is in pairing
mode.
• Turn the bulb switch on and off
three times
• After the third time, the bulb
will start blinking about once
every two seconds, indicating
that it is in Wi-Fi pairing mode

b. Press “+” sign in top right corner
of Smart Life.

c. Under the “Add Manually”
option, scroll on the left to
“Lighting”.

d. Under the “Light Source”
section, press the “Light Source
(Wi-Fi)” option.

e. Confirm the username and pass-
word for the 2.4 GHz Wi-Fi net-
work and press “Next”.

f. Make sure indicator prompt has
been seen, check the circle and
press “Next”.

g. Wait for the device to pair. If the
duration times out, make sure the
smart lights are not paired and are
in reset mode before retrying.

Device successfully paired.

Innovative Global Solutions & Services Pte Ltd
No. 5 International Business Park
#02-07A Mewah Building
Singapore 609914
Congratulations!
Your device is
online