Genius KYE Systems GG00A5 Operating and installation instructions

English
4. Aer press buon on the remote control to enter the Bluetooth mode. If
there is a paired device, it will return to the paired device. If there is no paired
device, it will enter the pairing mode.
5. Pairing: In the Bluetooth status, long press buon on the remote control for 3
seconds. When the speaker will make a nocaon sound, it indicates that the
current pairing device is released and the pairing mode is entered. The blue and red
LEDs ash alternately. At this me, Bluetooth device pairing can be performed.
6. TWS Operation Function:
Two speakers are powered on. Enter the Bluetooth mode, set one as the master
speaker, and the other as the slave speaker. The slave speaker must be in the state
without any equipment connected, and the master speaker is unlimited. There are
connected devices and no connected devices. Long press the key on the main
speaker for 3 seconds. At this me, the main speaker will make a nocaon sound,
and the two speakers can be connected. When the slave speaker is connected to the
main speaker, the slave speaker will emit two beeps, indicang that the connecon
is successful. Aer the speakers are connected, if the main speakers have connected
devices and the two speakers have blue LEDs on, the master speakers can control
the slave speakers and play. If there is no equipment connected to the main speaker,
the blue and green LEDs of the two speakers will ash alternately. At this me, the
main speaker must be connected to audio equipment. The main speaker is
connected to audio equipment. The two speakers have blue LEDs on. The main
speaker can control the slave speakers and can also play.

English
Turn oTWS Funcon:
Long press key on the main speaker for more than 3 seconds. Aer a
nocaon sound from the speaker, the blue and red LEDs on the secondary
speaker ash alternately, indicang that the TWS funcon is disabled.
7. Pairing, TWS, previous song, next song these funcons only work under Bluetooth
status.
8. Aer power on, short press buon on the remote control to enter the
Bluetooth mode, short press the buon on the remote control to enter the
LINE mode.
9. Reset :
(If the TWS has been paired, please release the TWS funcon rst, the reset funcon
can work normally.) In the Bluetooth status, press and hold the and keys
for 3 seconds, there will make a nocaon sound, which means that all memories
have been cleared and the Bluetooth state is entered. The red LED ashes and you
can pair the Bluetooth device.
10.Turn o: Unplug the power supply and the LED is o.
二、Button Function

English
Status
Function
Button Operation
Description
1
Turn oTurn on
The red LED is on
when the USB power
code of speaker is
plugged in, and
enters LINE mode by
default.
The red LED is on when you
turn on, and enters LINE
mode.
Power on Bluetooth Short press
buon
Blue and red LEDs ash
alternately and enter pairing
status.
Power on Line Short press
buon
Red LED always on, enters to
LINE mode.
Power on
Turn o
Unplug power
LED turn o
2 Bluetooth
/ Line
Increase
Volume
Short press the
buon
Long press the
buon
Short press the buon
to increase volume.
Long press the to
increase volume
connuously.
3 Bluetooth
/ Line
Decrease
Volume
Short press the
buon
Long press the
buon
Short press the buon
to increase volume.
Long press the to
increase volume
connuously.
4 Bluetooth Previous
Track
Double-click
buon quickly
Enter to previous track
5 Bluetooth Next Track
Double- click
buon quickly
Enter to next track
6
Play music Pause Short press the
buon
Short press buon to
stop playing music, click
again to resume playback.
Line Mute
S
hort press the
bu
on
Short press the buon
enters to mute status. Press it
again, the music unmute.
7 Bluetooth PAIR Long press
buon for 3 seconds
When the speaker will make
anocaon sound, it means
that the current pairing
device is canceled; the blue
and red LEDs ash

English
Status
Function
Button Operation
Description
alternately, enters the pairing
status.
Bluetooth Reset
Long press and hold
the and
keys for 3 seconds
(If the TWS has been paired,
please release the TWS
funcon rst, the reset
funcon can work normally.)
In the Bluetooth status, press
and hold the and
keys for 3 seconds, there will
make a nocaon sound,
which means that all
memories have been cleared
and the Bluetooth state is
entered. The red LED ashes
and you can pair the
Bluetooth device.
8 Bluetooth TWS Long press key
for 3 seconds
Long press key for 3
seconds.A er a nocaon
sound from the speaker, the
LED ash alternately, enters
TWS pairing status.
Long press key on the
main speaker for more than 3
seconds. Aer a nocaon
sound from the speaker, the
blue and red LEDs on the
secondary speaker ash
alternately, indicang that
the TWS funcon is disabled.

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, maycause harmful interferenceto radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate thereceiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between theradiator & your body