Geo Cosy User manual

Quick reference guide
Cosy display
COSY-N-USG-NNN.indd 1COSY-N-USG-NNN.indd 1 29/09/2014 23:0529/09/2014 23:05

Get more help and support online http://comehometocosy.com/support
COSY-A-USG-100_2
About your Cosy display
The Cosy display shows the current temperature at its location. The light tells you which mode the heating
is currently in. If you have more than one display, then the zone name is shown at the top of the screen.
Press the mode button once to view the temperature for the mode, then press it again to confirm. The light
next to the mode button confirms that the heating mode is now active.
FAQs
Where is the best place for my Cosy display?
The display should be located away from radiators
and out of direct sunlight.
My Cosy display is showing a link error
Move your display closer to the Cosy hub and
make sure the hub is powered on.
The Cosy display is blank
When you have your Cosy display offthe charging
dock it will automatically reduce the display
brightness to conserve power. Simply press any
button and the display will come back on.
If the battery has no charge left, place the display
back on the charging dock.
Comfy mode
Press the dbutton to view the
Comfy temperature and press
again for one hour of Comfy.
Slumber mode
Press the zZz button to view
the Slumber temperature and
press again to set the system
to Slumber and cancel the
current mode.
Lower button
Press the Obutton to enable
or disable the Cosy system
(Hibernate mode) or to enable
heating the hot water for one
hour.
Cosy mode
Press the ebutton to view
the Cosy temperature and
press again for one hour
of Cosy.
Status lights
The lights next to each of
the four buttons indicate
the current mode of your
Cosy system. A green light
means that the system is at
the desired temperature; a
magenta light indicates that
the system is heating; a blue
light means the system is
switched off.
COSY-N-USG-NNN.indd 2COSY-N-USG-NNN.indd 2 29/09/2014 23:0529/09/2014 23:05