GeoVision GV-PA481 User manual

GV-PA481 PoE Adapter
The GV-PA481 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP device anywhere in a building where power outlets are not available.
Packing List
1. GV-PA481 PoE Adapter x 1
Note: The AC Power Cord can be purchased upon request.
Applied to
GV-BX5300-E
GV-BX3400-E
GV-BX2400-E
GV-BX1500-E
GV-Hybrid LPR Camera 10R
GV-Hybrid LPR Camera 20R
June 13, 2014
1

Connections
Two Ethernet cables are required for the connection.
1. Connect one end of the first Ethernet cable into the DATA IN port on the GV-PA481, and
the other end to the hub/router connecting to the computer which will be used to access
the IP device.
2. Connect one end of the optional power cord into the Rear Panel on the GV-PA481, and
the other end to the power outlet. The Power LED on the front panel of the GV-PA481
turns green now.
June 13, 2014
2
3. Connect one end of the second Ethernet cable into the POWER & DATA OUT port on
the GV-PA481, and the other end to the IP device. The Active LED on the front panel of
the GV-PA481 turns red now.
Ethernet Cable
PoE
GV-BX-E
Rear Panel
Power Hub/Router
POWER &
DATA OUT DATA IN

June 13, 2014
3
Specifications
PoE Standard IEEE 802.3at Power over Ethernet / PD
PoE Output (10 / 100 Out) DC 48V, 1A (48 W Max.)
GV-Hybrid
LPR Camera Max 10 m (32.8 ft) from GV-PA481 to IP
device, CAT5
Ethernet Cable Length
GV-IP Camera Max 100 m (328 ft) from GV-PA481 to IP
device, CAT5
Power Input AC 100 ~ 240V, 2A
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Dimensions (L x W x H) 138 x 104 x 38 mm (5.43 x 4.09 x 1.5”)
Weight 610 g (1.34 lb)
All specifications are subject to change without notice.

