GeoVision GV-PA901 User manual

January 25, 2019 1
GV-PA901 PoE Adapter
The GV-PA901 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP camera anywhere in a building where power outlets are not available.
Packing List
1. GV-PA901 PoE Adapter x 1
2. AC Power Adapter x 1
Connections
Two Ethernet cables are required for the connection.
1. Connect one end of the first Ethernet cable into the LAN 10 / 100 port on the GV-PA901,
and the other end to the LAN port on a Hub / Router.
2. Connect one end of the second Ethernet cable into the PoE 10 / 100 port on the GV-
PA901, and the other end to the IP camera.
3. Connect the GV-PA901 to power using the supplied power adapter.

January 25, 2019 2
Specifications
PoE Standard High Power Over Ethernet (Max. 90 W)
PoE Output (10 / 100 Out) DC 56V, 1.6A (Max. 90 W)
Ethernet Cable Length
Max. 100 m (328 ft) from GV-PA901 to IP device, Cat5e
cable
Power Input AC 100V ~ 240V, 2A
Operation Temperature -10°C ~ 50°C (14°F ~ 122°F)
Dimensions (L x W x H) 69 x 40 x 93 mm (2.7 x 1.57 x 3.66 in)
Weight 250 g (0.55 lb)
All specifications are subject to change without notice.