
GfS e-Cover® A Art.-Nr.: 400 000
2MA_400000_GfS e-Cover®_A_1215_GB
DESCRIPTION
FEATURES
GENERAL INFORMATION
The GfS e-Cover® A is a tough polycarbonate hinged predective cover that
can easily be installed over a range of emergency switches and other devices
to provide predection from vandalism, accidental damage or misuse.
The GfS e-Cover® A can also be fitted with an integral battery powered alarm,
that when lifted emits an ear piercing 90 dB pre-alarm, warning the user that
the device is for emergency use only and should not be tampered with.
• Designed for ease of installation, the GfS e-Cover® A can be fitted and
predecting devices within minutes
• Smart design and engineering resulting in an aesthetically pleasing but
tough retrofitable predective cover
• An optional battery powered 90 dB alarm can be fitted thus increasing
the security and predection of the device it is predecting
• The alarmed GfS e-Cover® A has a 3 year battery life and incorporates
a low battery warning LED
• A break seal can also be fitted to increase visable detterants
against misuse
• 3 surface mounting spacers are available 18 mm, 32 mm (standard)
and 50 mm
• The GfS e-Cover® A is available in 5 colours, red,green, yellow,
blue and white
• The GfS e-Cover® A waterproof is also available, providing predection
for devices exposed to hostile environments
TECHNICAL INFORMATION
119 mm 37 mm
190 mm
PRODUCTS
non sounder
GfS e-Cover® A, non sounder, flush mounting, green 400 000
GfS e-Cover® A, non sounder, flush mounting, red 400 001
GfS e-Cover® A, non sounder, flush mounting,
waterproof, green
400 100
GfS e-Cover® A, non sounder, flush mounting,
waterproof, red
400 101
with integral sounder
GfS e-Cover® A with integral sounder,
flush mounting, green
410 000
GfS e-Cover® A with integral sounder,
flush mounting, red
410 001
GfS e-Cover® A with integral sounder,
flush mounting, waterproof, green
410 100
GfS e-Cover® A with integral sounder,
flush mounting, waterproof, red
410 101
Accessories
GfS e-Cover® A surface mouting spacer 32 mm deep 400 005
GfS e-Cover® A surface mouting spacer 50 mm deep 400 006
GfS Break Seals (10 pc) 400 400
GfS Servicing Pin (5 pc)
CONFORMITY
This product conforms to the basic requirements of the R&TTE Directive
1999/5/EC. The Declaration of Conformity can be ordered from your sflush
mountingplier.
GENERAL INFORMATION
Waste electrical products should not be disposed of with household waste!
Dispose of the waste product via a collection point for electronic scrap or via
your specialist dealer. Put the packaging material into the recycling bins for
cardboard, paper and plastics.
WARRENTY
Within the statutory warranty period we undertake to rectify free of charge
by repair or replacement any product defects arising from material or pro-
duction faults.
Any unauthorized tampering with, or modifications to the product shall ren-
der this warranty null and void.
CUSTOMER SERVICE
If, despite correct handling, faults or malfunctions occur or if the product
was damaged, please contact your supplier.